Professional Documents
Culture Documents
Our Titan Props can hold eight times the load Due to its lightweight material it is capable of supporting eight
for the same weight of its steel counterpart. times the load for the same weight of its steel counterpart.
This extruded aluminium Prop is easily handled in awkward
locations and ideally suited for tight and difficult access
applications. They have a phenomenal 10 tonne working load
limit and are made of high grade light alloy for easy handling.
Metres (kN)
1.70 100.0
1.90 100.0
2.10 100.0
2.30 100.0
2.50 88.0
3.10 79.9
3.30 70.0
3.50 62.4
3.70 55.0
3.90 50.0
4.30 42.0
4.50 39.0
4.70 37.1
4.90 33.0
5.10 31.0
5.30 28.0
5.50 27.0
Titan Props
170
143
110
ø13
ø
76
The most versatile aluminium prop available,
110
can be used in combination for longer lengths.
235
200
127
13.2
13.5
170
143
80
ø13
3.5
13.5
ø1
ø
76
17
235
200
127
ø51 110
13.5
150
124
17
110
13.2
124
80 150
110
3.5
13.5
ø1
17
110
ø51
13.2
150
124
17
4210
124
150
3.5
13.5
Joint Information
ø1
ø51
150
124
17
2900 – 4100
1610
124
150
1700 – 2900
Titan Frame
DIMENSIONS AND WEIGHT Due to its low weight, the GT 24 is basically moved, assembled and dismantled by hand. No damage occurs through the use of machinery. Damage could occur if
the GT 24 falls to the ground from a great height or is shortened by means of a saw. The GT 24 is to be inspected before every use for signs of damage and, if
GT 24 is used for constructing wall formwork elements. It serves to support the form lining which has direct contact to the fresh concrete during concreting.
necessary, taken out of service.
nsfers the loads from the fresh concrete pressure to the steel walers which support it on the side opposite the form lining. The GT 24 and steel waler are
GT Beams
ected by means of hook straps. Storage
The GT 24 is stored in a horizontal position: chord on chord or chord on web. The entire surface is to be supported in order to avoid any distortion
occurring. NOMINAL LENGTH (mm) ACTUAL LENGTH (mm) WEIGHT (kg)
GT 24 is used as a main beam with support provided by a crosshead or claw head, or directly through the head plate of a slab prop. It is also used as a
900 918 5.3
ndary beam for transferring slab loads into the main beam. In both cases the GT 24 must project 163 mm over Typical
the axisSite of the beam to be supported.
Applications
1200 1214 7.1
The GT24 beam can be applied for many uses in construction. The more common uses include being used to form catchment decks and also to
1500
support timber joists. Examples of these uses are conveyed below: 1510 8.9
dition, the GT 24 is also used for stop ends at slab edges as well as for special forms.
1800 1806 10.6
2100 2102 12.4
MENSIONS AND WEIGHT GT BEAM 2400 2398 14.2
CONCRETE SLAB 2700 2694JOIST
TIMBER 15.9
3000 2990 17.7
Nominal Length Actual Length Weight TITAN TO 3300 GT 24 BEAM PLYWOOD
3286 TITAN TO
19.5
U-HEAD CLAMP GT 24 BEAM
U-HEAD CLAMP
3600 3592 21.2
900mm 918mm 5.3kg
NOMINAL LENGTH (mm) ACTUAL LENGTH (mm) WEIGHT (kg) 3900 3878 23
900 918 5.3 4200 4174 WALL 24.8
1200mm 1214mm 7.1kg
4500 4470 26.6
1200 1214 7.1
4800 4766 28.3
1500mm 1500 1510mm 1510 8.9kg 8.9
5100 5062 30.1
1800 1806 10.6 5400 5358 31.9
1800mm 1806mm 10.6kg
2100 2102 12.4 5700 5654 33.6
2100mm 2400 2102mm 2398 12.4kg 14.2 6000 5950 35.4
2700 2694 15.9TIMBER OVERLENGTH UP TO L=17.8m TIMBER 5.9kg/m
SLEEPER SLEEPER
2400mm 3000 2398mm 2990 14.2kg 17.7
3300 3286 19.5
2700mm 2694mm 15.9kg
3600 3592 21.2
CATCHMENT DECK FLOOR JOIST SUPPORT
3000mm 3900 2990mm 3878 17.7kg 23
4200 4174 24.8 311 296
Due to it's light weight, the GT24 beam is generally used in conjunction with Shore Hire's range of light weight aluminium titan props and applicable accessories
3300mm 4500 3286mm 4470 19.5kg including the 26.6
titan U-Head and titan frame. However, the beams are adaptable and flexible and can be utilised with a broad range of other propping gear and
associated accessories.
4800 4766 28.3
3600mm 3592mm 21.2kg
5100 5062 30.1
3900mm 5400 3878mm 5358 23kg 31.9
240
240
120
60
28
163 296 80
Multi Props
Light props with high load-bearing capacity.
NEWCASTLE BRANCH
18 Yilen Close
Beresfield NSW 2322
newcastle@shorehire.com.au
T: 02 4918 2500
MELBOURNE BRANCH
1 Oban Court
Laverton North VIC 3026
melbourne@shorehire.com.au
T: 03 9344 6400
BRISBANE BRANCH
11 Angel Road
Stapylton QLD 4207
brisbane@shorehire.com.au
T: 07 3080 4000
HEAD OFFICE
PO Box CP449
Condell Park NSW 2200
354 Edgar Street
Condell Park NSW 2200
accounts@shorehire.com.au
T: 02 8708 1250