Professional Documents
Culture Documents
0020
0010
***
X
In process inspection & test requirement
Workmanship, components and Dimensions
Specification Details / Notes:
Per ASTM
0060 X X Hydrostatic test-. The test shall be conducted after all Each length of pipe shall be tested by the manufacturer to a
manufacturing processes (including repairs and heat treatments) hydrostatic pressure not less than 60 % of the specified
are completed. minimum yield strength
0070 X X Nondestructive Test -Full Body of Each pipe As per ASTM B829 and other applicable ASTM stds.
0030
0010
***
X X
Final inspection & test requirements
Visual and dimensional inspection
Specification Details / Notes:
Per 01-SAMSS-047 and applicable ASTM std
IR010900 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 07/09/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 03/31/2012 IR010900 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0020 X Marking Per 01-SAMSS-047 and applicable ASTM std.
Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, AAJ and AOC Inspection Offices.
(2) See form SA175 - 000003 for instructions on using this form.
End of IR010900