Professional Documents
Culture Documents
TEST AND INSPECTION PER: API-9A, Purchase Order, and Specifications As Noted Below.
0020 X Material Test Reports Material test reports shall contain all relevant information to
determine that the product conforms to the API specification
and Purchase Order requirements.
0020
0010
*** R
In process inspection & test requirement
Galvanized / Drawn Galvanized Wire Rope
Specification Details / Notes:
Weight of coating to comply with API 9A Section 3.
0030 X Mechanical Properties of Individual Rope Wire Wire shall have the mechanical properties before and after
fabrication as specified in API 9A, Section 4, Levels 2 through 4
as applicable.
0040 X Physical Properties ( Tensile, Torsion & Nominal Strength and Compliance with Purchase Order Description and API 9A
elongation)
0050 X Hardness Test for Well Measuring Wire In accordance with the methods and maximums specified in the
Purchase order.
0030
0010
***
W
Final inspection & test requirements
Packaging
Specification Details / Notes:
Reels shall have a 2" clearance between the wire and the
outside diameter of the flange.
0030 H Visual and Dimensional Inspection Verify conformance with the Purchase order description and
manufucturing tolerances in accordance with API 9A,as
appropriate.
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.
End of IR451400