You are on page 1of 2

a Directions for adjustment of valve clearance AH05.30-B-1000-01C.

fm 1

AH05.30-B-1000-01C.fm Directions for adjustment of valve clearance

Arrangement of cylinders and valves


364, 366 engines
A Intake valve
E Exhaust valve
X Engine flywheel side

B01.00-0003-01 B05.30-0030-01

Method 1: Method 2:
Individually adjust intake and exhaust valves, per cylinder, in the firing Adjust the intake and exhaust valves clearance in two crankshaft
order. The valves to be adjusted must be fully shut and the piston of the positions.
same cylinder must be at compression stroke TDC. Consequently, the Position 1- crankshaft with piston of cylinder nr. 1 at compression stroke
valves of the cylinder whose twin piston (that occupies the same position) TDC. Cylinder nr. 4 (4 cylinder engine), or cylinder nr. 6 (6 cylinder
at exhaust stroke TDC will be in balance (crossing). engine), valves will be in balance.
Position 2- crankshaft with piston of cylinder nr. 1 at exhaust stroke TDC.
Consequently, valves of cylinder nr. 1 will be in balance.
a Directions for adjustment of valve clearance AH05.30-B-1000-01C.fm 2

Method 1 Nr. of cylinder Method 2 Nr. of cylinder/valve to be adjusted

1 2 3 4 5 6

364 engine piston in compression stroke tdc 1-3-4-2 position 1 (cylinder nr. 1, I/E I E -
(valves shut) in compression tdc)

piston in exhaust stroke tdc 4-2-1-3 position 2 (cylinder nr. 1, - E


in exhaust tdc)

You might also like