Professional Documents
Culture Documents
Fast Cmos Octal Buffer/Line Driver: Features: Description
Fast Cmos Octal Buffer/Line Driver: Features: Description
FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND INDUSTRIAL TEMPERATURE RANGES
FEATURES: DESCRIPTION:
• Std., A, and C grades The IDT octal buffer/line driver is built using an advanced dual metal
• Low input and output leakage ≤1µA (max.) CMOS technology. The FCT244T is designed to be employed as a memory
• CMOS power levels and address driver, clock driver, and bus-oriented transmitter/ receiver
• True TTL input and output compatibility: which provides improved board density.
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
• High Drive outputs (-15mA IOH, 64mA IOL)
• Meets or exceeds JEDEC standard 18 specifications
• Military product compliant to MIL-STD-883, Class B and DESC
listed (dual marked)
• Power off disable outputs permit "live insertion"
• Available in the following packages:
– Industrial: SOIC, SSOP, QSOP, TSSOP
– Military: CERDIP, LCC
OEA
OEB
DA0 OA0
OB0 DB0
DA1 OA1
OB1 DB1
DA2 OA2
OB2 DB2
DA3 OA3
OB3 DB3
IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
PIN CONFIGURATION
INDEX
OEA
OB0
DA0
OEB
VCC
OEA 1 20 VCC
DA0 2 19 OEB
OB0 3 18 OA0 3 2 20 19
DA1 4 18 OA0
DA1 4 17 DB0 1
OB1 17 DB0
OB1 5 16 OA1 5
DA2 16 OA1
DA2 6 15 6
DB1
OB2 15 DB1
OB2 7 14 OA2 7
DA3 14 OA2
DA3 8 13 DB2 8
9 10 11 12 13
OB3 9 12 OA3
11
GND
GND 10
DB3
DB2
OB3
DB3
OA3
CERDIP/ SOIC/ SSOP/ QSOP/ TSSOP LCC
TOP VIEW TOP VIEW
2
IDT54/74FCT244T/AT/CT
FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND INDUSTRIAL TEMPERATURE RANGES
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. The test limit for this parameter is ±5µA at TA = –55°C.
3
IDT54/74FCT244T/AT/CT
FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND INDUSTRIAL TEMPERATURE RANGES
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input; (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of ΔICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ΔICC DHNT + ICCD (fCP/2+ fiNi)
ICC = Quiescent Current
ΔICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Output Frequency
Ni = Number of Outputs at fi
All currents are in milliamps and all frequencies are in megahertz.
4
IDT54/74FCT244T/AT/CT
FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND INDUSTRIAL TEMPERATURE RANGES
Octal Link
DATA 3V
INPUT 1.5V
tSU tH 0V LOW-HIGH-LOW
3V PULSE 1.5V
TIMING
INPUT 1.5V
ASYNCHRONOUS CONTROL 0V tW
tREM
PRESET 3V
CLEAR 1.5V HIGH-LOW-HIGH 1.5V
ETC. 0V PULSE
SYNCHRONOUS CONTROL
PRESET 3V
CLEAR 1.5V
tSU tH 0V
CLOCK ENABLE
ETC. Pulse Width
Octal Link Octal Link
ENABLE DISABLE
3V 3V
SAME PHASE 1.5V
INPUT TRANSITION CONTROL 1.5V
0V INPUT
tPLH tPHL 0V
VOH tPZL tPLZ
OUTPUT 1.5V OUTPUT 3.5V 3.5V
VOL NORMALLY SWITCH 1.5V
tPLH tPHL LOW CLOSED 0.3V VOL
3V tPZH tPHZ
OPPOSITE PHASE
INPUT TRANSITION 1.5V VOH
0V OUTPUT SWITCH 0.3V
NORMALLY 1.5V
HIGH OPEN
0V 0V
Octal Link Octal Link
Propagation Delay
Enable and Disable Times
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
5
IDT54/74FCT244T/AT/CT
FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND INDUSTRIAL TEMPERATURE RANGES
ORDERING INFORMATION
XX FCT XXXX XX X X X
Temp. Range Device Type Package Process
Blank Tube
8 Tape and Reel
G Green
Blank Industrial
B MIL-STD-883, Class B
Industrial Options
SO Small Outline IC (PSG20)
PY Shrink Small Outline Package (PYG20)
Q Quarter-size Small Outline Package (PCG20)
PG Thin Shrink Small Outline Package (PGG20)
Military Options
D CERDIP (CD20)
L Leadless Chip Carrier (LC20)
54 −55°C to +125°C
74 −40°C to +85°C