Professional Documents
Culture Documents
Cemcoat Crack Filler
Cemcoat Crack Filler
Description
Technical Properties @ 250C:
Cemcoat Crack Filler is a cemen ous crack filler
Colour: White
composed of high quality white cement, fine filler and
special addi ves, which require only the addi on of Fresh wet density: 1.7 ± 0.1 g/cm3
water to produce an easy to apply pu y.
Maximum aggregate
0.15 mm
Cemcoat Crack Filler is formulated for the repair of Size:
sta c cracks providing a smooth surface ready for the Pot life: 3 - 4 hours
applica on of decora ve paint, coa ngs and wallpaper.
Compressive strength: ≥ 10 MPa @ 28 days
Applications ASTM C109/C109M (dry cure)
Flexural strength: ≥ 4 MPa @28 days
For repairing sta c cracks with a thickness of up to 5 ASTM C348 (dry cure)
mm.
Suitable for internal and external applica ons. Bond strength:
≥ 1 MPa @ 28 days
ASTM C1583
Advantages
Placing and Finishing
Easy to mix and apply, requires only addi on of water.
Factory controlled pre-blended mixture which ensures Apply Cemcoat Crack Filler to the cracks, holes and
consistent quality. indenta ons using a trowel or pu y knife. Press the filler
Easy to sand to a smooth finish. firmly into the cracks to ensure good bond and complete
High bond strength. filling of the cracks.
Contains non-shrinking proper es.
Suitable for humid and dry condi ons. Even out the crack filler to be level with the surrounding
surface and allow to dry before sanding, drilling or
Method of Use pain ng.
All surfaces should be sound, clean and free from dust, All tools should be cleaned immediately using clean
oil and foreign materials. All cement-based surfaces water, hardened material should be cleaned using proper
should be soaked with clean water prior to applica on mechanical means.
and allowed to become damp at the me of applica on.
Packaging
Mixing
Cemcoat Crack Filler is available in 25 kg bags.
To ensure proper mixing, a mechanically powered mixer
or drill fi ed with a suitable paddle should be used. Yield
9.75 - 10.25 litres of clean water for each 25 kg bag Approximately 20.5 Litres per 25 kg bag.
should be added to a clean container. The powder should
then be added slowly while mixing con nuously at 400 - Storage
600 rpm, mixing me should be con nued un l uniform
consistency is obtained. Leave the mix for 5 minutes and Cemcoat Crack Filler has a shelf life of 12 months from
s r again. date of manufacture if stored at temperatures between
5°C and 35°C in original unopened bags.
Note:
11-0074-A-2020
tĞĞŶĚĞĂǀŽƵƌƚŽĞŶƐƵƌĞƚŚĂƚĂŶLJŝŶĨŽƌŵĂƟŽŶ͕ĂĚǀŝĐĞŽƌƌĞĐŽŵŵĞŶĚĂƟŽŶǁĞŵĂLJŐŝǀĞŝŶ
ƉƌŽĚƵĐƚ ůŝƚĞƌĂƚƵƌĞ ŝƐ ĂĐĐƵƌĂƚĞ ĂŶĚ ĐŽƌƌĞĐƚ͘ ,ŽǁĞǀĞƌ͕ ďĞĐĂƵƐĞ ǁĞ ŚĂǀĞ ŶŽ ĐŽŶƚƌŽů ŽǀĞƌ
ǁŚĞƌĞĂŶĚŚŽǁƉƌŽĚƵĐƚƐĂƌĞĂƉƉůŝĞĚ͕ǁĞĐĂŶŶŽƚĂĐĐĞƉƚĂŶLJůŝĂďŝůŝƚLJĂƌŝƐŝŶŐĨƌŽŵƚŚĞƵƐĞŽĨ
ƚŚĞƉƌŽĚƵĐƚƐ͘