Professional Documents
Culture Documents
The Sentry™ closure was designed to meet a simple criteria to provide a ‘Simple design
incorporating an improved locking arrangement, permitting operation of any size closure in less than
90 seconds and integral safety to prevent unsafe operation’. The Sentryä closure not only meets,
but surpasses these needs.
Designed using the classical formulas of ASME Section VIII Div. 1, validated by Finite Element
Analysis and verified with extensive proof testing, the Sentryä closure can be supplied in
accordance with all international design codes.
General Design
The Sentryä closure concept relies on a simple ring
of material that slides within a groove machined into
the outer flange or hub. When expanded to the
closed position, the locking ring securely locks the
door into position.
Closure Operation
The Sentryä closure operating cycle consists of
removing the Pressure Alert Valve / Safety
Segment assembly and then rotation of the
actuator lever 180°. This simple operation contracts
the locking ring sufficiently to clear the outer flange,
allowing the door to be pulled opened. Closing is
simply a reversal of this operation.
Closure Sealing
A key feature of the Sentryä closure is the pressure
energized lip seal. Located within the face of the door for
protection, the seal is available in a wide range of materials
and suitable for both full vacuum and ultra-high pressure
ratings.
Page 1 of 4
Closure Safety
Safety is paramount in today’s industry and the Sentryä closure not only provides speed of
operation but also the benefit of integral safety to prevent unsafe operation. With the locking
ring in the locked closed position, internal pressure creates a seating force that physically
traps the locking element between the door and outer hub, making it impossible for the door
to open.
Configurations
Horizontal
For horizontal operation, the Sentryä closure is
supplied with a heavy duty, double pivot hinge
arrangement that fully supports the weight of the
closure door, minimizes the swing radius and
insures repetitive operation.
Vertical
For vertical operation, the Sentryä closure is
supplied with a heavy-duty davit arm
arrangement, capable of supporting the weight of
the door and being positioned to provide safe
access to the vessel interior.
Page 2 of 4
Sentry™ Closure Product Overview
Page 3 of 4
Sentry™ Design Variations
To meet the demanding requirements of pressure vessels supplied in today’s market, the
Sentryä closure can be supplied in various configurations:
The closure bore is machined to match the internal bore of the mating
vessel or pipe.
Self reinforced
U.S.A.
1-800-654-5603 or 281-351-2222
Canada
1-800-661-5659 or 780-437-6316
Page 4 of 4