Professional Documents
Culture Documents
Readme POWER-SeleCalc 5 0 Installation
Readme POWER-SeleCalc 5 0 Installation
Without a change made by you, you will find the file in the program path:
C:\Habasit\POWERSeleCalc\
1. Introduction
POWER-SeleCalc (created by Habasit) is an engineering program to analyze the
resulting forces in the belt and the equipment and to check whether the effective
tensile force of a belt is not higher than the admissible tensile force.
The cover letter for printout and the user interface are currently available in en, de.
2. Expiry date
The version is limited for use until December 31st, 2017. Update will be announced
by e-mail end of November 2017 the latest.
3. Contact
Contact the Habasit Company responsible for your location.
For contact information, please visit http://www.habasit.com/
or send an e-mail to info@habasit.com
4. Installation
- Double-click the program install file.
- Then follow the screens until the installation is completed successfully.
- Start the application from the desktop icon or the start menu.
- The install wizard, based on InstallShield(R), checks installations of MS Access or
a previous POWER-SeleCalc installation.
- The tool is provided as a set of packaged files containing the necessary software
and database files.
- If MS Access is already installed you normally need local admin rights on your PC
to install POWER-SeleCalc.
Prerequisites:
- The POWER-SeleCalc Install Wizard will search for MS Access Runtime or a MS
Access full version. If none of them is found, it will automatically open a
connection to the Habasit SeleCalc download page
http://www.selecalc.com/download.html. (There you will find the Runtime Setup-
Wizard and the further installation instructions.)
- POWER-SeleCalc 5.0 supports the following platforms:
Windows 2000 Professional, Windows XP Home, Windows XP Professional,
Windows Vista, Windows 7
- Memory (RAM): > 64 MB
- Disk: > 80 MB free disk space available
5. Removal of POWER-SeleCalc
Important:
- To be sure to save the database of previously issued calculations copy the
database "UserPOWERData.mdb" to a separate location first.
- Start the installation file again and confirm the removal during the dialog that
follows.
- If you are asked whether to delete files, those are shared with other applications,
do not have them deleted.
- Another way to remove POWER-SeleCalc in a XP, Vista or Windows 7
environment is going via Start menu -> System -> Software -> add/remove
programs and choose POWER-SeleCalc.
7. Start calculation
- Choose a company name from the dropdown menu or add a new company by
clicking on the „New customer“ icon. The properties of the customer can be
edited using the „Edit customer info“ icon. This data will be used for the cover
sheet of the printout.
- Open a previous calculation by clicking on the „Open project“ icon.
- If you want to create a new calculation click on the „New project“ icon.