This document contains 25 multiple choice questions related to physics concepts such as dimensions, units, errors and uncertainties. The questions cover topics like dimensional analysis, units of physical quantities, absolute and percentage errors in measurements.
This document contains 25 multiple choice questions related to physics concepts such as dimensions, units, errors and uncertainties. The questions cover topics like dimensional analysis, units of physical quantities, absolute and percentage errors in measurements.
This document contains 25 multiple choice questions related to physics concepts such as dimensions, units, errors and uncertainties. The questions cover topics like dimensional analysis, units of physical quantities, absolute and percentage errors in measurements.
by (b) [WFv-1] (a) Absolute error (c) [W-1F -1v] (b) Percentage error (d) [WF-1v -1] (c) Both (d) None of these Question 8.The dimensions of kinetic energy is same as that of Question 2. (a) force Which of the following pairs has the same (b) pressure dimensions? (c) work (a) specific heat and latent heat (d) momentum (b) lmpulse and momentum (c) surface tension and force Question 9. (d) moment of lnertia and torque Which of the following groups have different dimensions? Question 3. (a) Potential difference, EMF, voltage The dimensions of kinetic energy is (b) Pressure, stress, Youngs modulus (a) [M 2L2T] (c) Heat, energy, work done (b) [ML 2T] (d) Dipole moment, electric flux, electric field (c) [ML 2T-2] (d) [ML 2T-1] Question 10. ML-1T -2 is the dimensional formula of Question 4.A force F is given by F = at + bt², (a) magnetic induction where t is time. What are the dimensions of a (b) self-inductance and b? (c) electric potential (a) MLT-1 and MLT0 (d) electric field (b) MLT-3 and ML2T4 (c) MLT-4 and MLT1 Question 11. (d) MLT-3 and MLT-4 What is the dimensional formula of magnetic field? Question 5. (a) MT-2A-1 The atmospheric pressure is 106 dyne/cm². (b) MT-1A-2 What is its value in SI unit? (c) M-1L-2TA-1 (a) 105 newton/m² (d) M-1LTA-2 (b) 106 newton/m² (c) 104 newton/m² Question 12. (d) 103 newton/m² Electron volt is a unit of (a) charge Question 6.In a system of units if force (F), (b) potential difference acceleration (A) and time (T) are taken as (c) energy fundamentals units then the dimensional (d) magnetic force formula of energy is Question 13. (a) FA2T The volume of a cube in m³ is equal to the (b) FAT2 surface area of the cube in m². The volume of (c) FA2T the cube is (d) FAT (a) 64 m³ Question 7.If force (F), work (W) and velocity (b) 216 m³ (v) are taken as fundamental quantities. What (c) 512 m³ is the dimensional formula of time (T)? (d) 196 m³ (c) H/m² Question 14. (d) Weber(Wb) In SI system the fundamental units are (a) meter, kilogram, second, ampere, Kelvin, Question 20. mole and candela Light year is a unit of (b) meter, kilogram, second, coulomb, Kelvin, (a) time mole and candela (b) distance (c) meter, Newton, second, ampere, Kelvin, (c) sunlight intensity mole and candela (d) meter, kilogram, second, ampere, Kelvin, Question 21. While measuring the acceleration mole and lux due to gravity by a simple pendulum, a student makes a positive error of 1% in the length of the Question 15. pendulum and a negative error of 3% in the value of Which one of the following represents the time period. His percentage error in the measurement of by the correct dimensions of the coefficient of viscosity? relation will be (a) [ML-1T-2] (a) 2% (b) [MLT-1] (b) 4% (c) [ML-1T-1] (c) 7% (d) [ML-2T-2] (d) 10%
Question 16. Question 22. What is the number of significant
A particle starting from the origin (0, 0) moves figures in 0.310×103 in a straight line in the (x, y) plane. Its (a) 2 coordinates at a later time are the path of the (b) 3 particle makes with the x-axis an angle of (c) 4 (a) 300 (d) 6 (b) 450 (c) 600 Question 23 Error in the measurement of (d) 0 radius of a sphere is 1%. The error in the calculated value of its volume is Question 17. (a) 1% Resolution is (b) 3% (a) a measure of the bias in the instrument (c) 5% (b) None of these (d) 7% (c) the smallest amount of input signal change that the instrument can detect reliably Question 24 The mean time period of second’s (d) a measure of the systematic errors pendulum is 2.00s and mean absolute error on the time period is 0.05s. To express maximum Question 18. estimate of error, the time period should be Absolute error of the measurement is written as (a) the difference between the individual (a) (2.00 ± 0.01) s measurement and the true value of the (b) (2.00 +0.025) s quantity cubed. (c) (2.00 ± 0.05) s (b) the difference between the individual (d) (2.00 ± 0.10) s measurement and the true value of the quantity squared. Question 25The unit of percentage error is (c) the difference between two individual (a) Same as that of physical quantity measurements and their mean (b) Different from that of physical quantity (d) the difference between the individual (c) Percentage error is unit less measurement and the true value of the (d) Errors have got their own units which are quantity different from that of physical quantity measured Question 19. Which of the following units denotes the dimensions [ML2/Q2], where Q represents the electric charge? (a) Wb/m² (b) Henry(H)