1. Steam enters an adiabatic at 302.5 C and 402 kpa. It exits as a saturated vapor at 32 kpa.
Determine the work done in KJ/kg.
2. Steam is compressed by an adiabatic compressor from 0.2 mpa and 150C to 0.8 Mpa and 350C at a rate of 1.30 kg/s. Find the power input to the compressor in KW. 3. Steam at 1 Mpa and 300C is throttled to a pressure of 0.4 Mpa. If the change in kinetic energy is negligible, the specific volume of the steam in m 3/kg after throttling is? 4. Steam is compressed adiabatically from 0.2 Mpa and 150 C to 2.5 Mpa and 250 C at a rate of 1.30 kg/s. the power input in KW is? 5. Steam enters a throttling calorimeter at a pressure of 1.03 Mpa . The calorimeter downstream pressure and temperature are respectively 0.100 Mpa and 125 C. What is the percentage moisture of the supply steam? 6. A steam turbine with 90% stage efficiency receives steam at 7 Mpa and 550 C and exhausts at 20 KPa. Determine the quality at exhaust in percent. 7. A throttling calorimeter is connected to the heated steam line supplying steam to the auxiliary feed pump on a ship. The line pressure measures 2.5 Mpa. The calorimeter pressure of 137.8 Kpa and 413.4 Kpa and temperature of 27 C and 177 C respectively. What is the increase of entropy of the system in KJ/C? 8. Steam enters and adiabatic turbine at 10 Mpa and 500 C and leaves at 10 Kp with a quality of 90%. Neglecting the changes in kinetic and potential energies, determine the mass flow rate in kg/s required for a power output of 5 MW. 9. A steam turbine with 90% steam efficiency receives stream at 7 Mpa and 550 C and exhausts at 20 Kpa. Determine the turbine work in kg/KJ.\ 10. Steam expands in a turbine from 4 Mpa and 500 C to 0.5 Mpa and 250 C at a rate of 135 kg/h. Heat is lost from the turbine at a rate of 25 KJ/s during the process. The power output of the turbine is?