Professional Documents
Culture Documents
Vishay Siliconix
Power MOSFET
FEATURES
PRODUCT SUMMARY
• Low Gate Charge Qg Results in Simple Drive
VDS (V) 400
Requirement Available
RDS(on) () VGS = 10 V 0.55
• Improved Gate, Avalanche and Dynamic dV/dt RoHS*
Qg (Max.) (nC) 36 Ruggedness COMPLIANT
Qgs (nC) 9.9
• Fully Characterized Capacitance and Avalanche Voltage
Qgd (nC) 16 and Current
Configuration Single • Effective Coss Specified
D • Compliant to RoHS Directive 2002/95/EC
TO-220AB
APPLICATIONS
• Switch Mode Power Supply (SMPS)
• Uninterruptable Power Supply
G
• High Speed Power Switching
S
D TYPICAL SMPS TOPOLOGIES
G S • Single Transistor Flyback Xfmr. Reset
N-Channel MOSFET • Single Transistor Forward Xfmr. Reset (Both for US Line
Input Only)
ORDERING INFORMATION
Package TO-220AB
IRF740APbF
Lead (Pb)-free
SiHF740A-E3
IRF740A
SnPb
SiHF740A
102 102
VGS
Top 15 V
ID, Drain-to-Source Current (A)
4.5 V 1
0.1
TJ = 25 °C
102 3.0
VGS ID = 10 A
Top 15 V VGS = 10 V
ID, Drain-to-Source Current (A)
10 V 2.5
8.0 V
7.0 V
10 2.0
(Normalized)
6.0 V
5.5 V
5.0 V 1.5
Bottom 4.5 V
1 4.5 V 1.0
0.5
20 µs Pulse Width
TJ = 150 °C
0.1 0.0
0.1 1 10 102 - 60 - 40 - 20 0 20 40 60 80 100 120 140 160
91051_02 VDS, Drain-to-Source Voltage (V) 91051_04 TJ, Junction Temperature (°C)
Fig. 2 - Typical Output Characteristics, TC = 150 °C Fig. 4 - Normalized On-Resistance vs. Temperature
105 102
VGS = 0 V, f = 1 MHz
Ciss = Cgs + Cgd, Cds Shorted
Ciss 10
103
Coss TJ = 150 °C
102
1
TJ = 25 °C
10 Crss
VGS = 0 V
1 0.1
1 10 102 103 0.2 0.4 0.6 0.8 1.0 1.2 1.4
91051_05 VDS, Drain-to-Source Voltage (V) 91051_07 VSD, Source-to-Drain Voltage (V)
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 7 - Typical Source-Drain Diode Forward Voltage
20 102
ID = 10 A Operation in this area limited
VGS, Gate-to-Source Voltage (V)
by RDS(on)
VDS = 320 V
16 10 µs
ID, Drain Current (A)
VDS = 200 V
12 VDS = 80 V
10 100 µs
1 ms
4
TC = 25 °C
For test circuit TJ = 150 °C
see figure 13 Single Pulse 10 ms
0 1
0 10 20 30 40 10 102 103
91051_06 QG, Total Gate Charge (nC) 91051_08 VDS, Drain-to-Source Voltage (V)
Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 8 - Maximum Safe Operating Area
RD
VDS
VGS
D.U.T.
Rg
10.0 +
- VDD
10 V
8.0
Pulse width ≤ 1 µs
ID, Drain Current (A)
6.0
Fig. 10a - Switching Time Test Circuit
4.0
VDS
2.0 90 %
0.0
25 50 75 100 125 150
10 %
91051_09 TC, Case Temperature (°C)
VGS
td(on) tr td(off) tf
Fig. 9 - Maximum Drain Current vs. Case Temperature
Fig. 10b - Switching Time Waveforms
10
Thermal Response (ZthJC)
1
D = 0.50
0.20
0.1 0.10 PDM
0.05
0.02
0.01 t1
Single Pulse
10-2 (Thermal Response) t2
Notes:
1. Duty Factor, D = t1/t2
2. Peak Tj = PDM x ZthJC + TC
10-3
10-5 10-4 10-3 10-2 0.1 1 10
VDS
15 V
tp
L Driver
VDS
Rg D.U.T. +
- VDD
A
IAS IAS
20 V
tp 0.01 Ω
Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms
1400 580
ID
Top 4.5 A
540
800
600 520
400
500
200
0 480
25 50 75 100 125 150 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
91051_12c Starting TJ, Junction Temperature (°C) 91051_12d IAV, Avalanche Current (A)
Fig. 12c - Maximum Avalanche Energy vs. Drain Current Fig. 12d - Typical Drain-to-Source Voltage vs.
Avalanche Current
Current regulator
Same type as D.U.T.
50 kΩ
QG
VGS 12 V 0.2 µF
0.3 µF
QGS QGD +
VDS
D.U.T. -
VG
VGS
3 mA
Charge
IG ID
Current sampling resistors
Fig. 13a - Basic Gate Charge Waveform Fig. 13b - Gate Charge Test Circuit
- +
-
Rg • dV/dt controlled by Rg +
• Driver same type as D.U.T. VDD
-
• ISD controlled by duty factor “D”
• D.U.T. - device under test
VGS = 10 Va
Reverse
recovery Body diode forward
current current
dI/dt
D.U.T. VDS waveform
Diode recovery
dV/dt
VDD
Re-applied
voltage
Body diode forward drop
Inductor current
Ripple ≤ 5 % ISD
Note
a. VGS = 5 V for logic level devices
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?91051.
D2
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.