Professional Documents
Culture Documents
(AUTONOMOUS)
(Approved by AICTE, New Delhi; Permanently Affiliated to JNTUK, KAKINADA)
An ISO 9001:2015, ACCREDITED BY NAAC WITH ‘A’ GRADE
Paritala, Krishna Dt – 521 180 (A. P.)
Secured Signature of
Hall Ticket No Faculty
Marks(10)
10) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H
11) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH
12) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment
17) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment
18) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack
19) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555
20) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero
Answers:
1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
D B D D B D D C C C
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
B B A A C B B A B B
AMRITA SAI INSTITUTE OF SCIENCE AND TECHNOLOGY SET 2
(AUTONOMOUS)
(Approved by AICTE, New Delhi; Permanently Affiliated to JNTUK, KAKINADA)
An ISO 9001:2015, ACCREDITED BY NAAC WITH ‘A’ GRADE
)
Paritala, Krishna Dt – 521 180 (A.P ) .
Name of the Exam: III B.Tech VI Semester Objective
Max Marks: 10 Subject: MPMC Time: 20 Min
Regulation: AR18 (EEE ) Faculty: M.VENKATRAO Academic Year: 2020-21
Hall Ticket No
1) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H
2) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH
3) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment
8) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment
9) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack
10) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555
11) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero
Answers:
1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
C B B A A C B B A B
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
B D B D D B D D C C
AMRITA SAI INSTITUTE OF SCIENCE AND TECHNOLOGY SET 3
(AUTONOMOUS)
(Approved by AICTE, New Delhi; Permanently Affiliated to JNTUK, KAKINADA)
An ISO 9001:2015, ACCREDITED BY NAAC WITH ‘A’ GRADE
Paritala, Krishna Dt – 521 180 (A. P.)
1) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH
2) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment
7) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment
8) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack
9) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555
10) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero
11) The first micro-processor had a (n) ______.
a) 1-bit data bus b) 2- bit data bus c) 3-bit data bus d) 4-bit data bus
20) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H
Answers:
1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
B B A A C B B A B B
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
D B D D B D D C C C
AMRITA SAI INSTITUTE OF SCIENCE AND TECHNOLOGY SET 4
(AUTONOMOUS)
(Approved by AICTE, New Delhi; Permanently Affiliated to JNTUK, KAKINADA)
An ISO 9001:2015, ACCREDITED BY NAAC WITH ‘A’ GRADE
Paritala, Krishna Dt – 521 180 (A. P.)
6) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH
7) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment
15) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H
17) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment
18) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack
19) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555
20) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero
Answers:
1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
D B D D B B B A A C
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
D D C C C B B A B B