Professional Documents
Culture Documents
Technical Submittal
Saudi BASF for Building Materials Co., Ltd
Index
Saudi BASF
Saudi BASF Facilities
Technical Data Sheet
Specification Clause
Method Statement
Material Safety Data Sheet
Approvals
Job References
Test Reports
LEED Certificate
Saudi BASF For Building Materials
About BASF
At BASF, we create chemistry for a
sustainable future. We combine economic
success with environmental protection and
social responsibility. The approximately
114,000 employees in the BASF Group
work on contributing to the success of our
customers in nearly all sectors and almost
every country in the world.
Our portfolio is organized into five segments:
Chemicals, Performance Products, Functional Materials & Solutions, Agricultural
Solutions and Oil & Gas.
BASF generated sales of more than Euro 64 billion in 2017. BASF shares are traded
on the stock exchanges in Frankfurt (BAS), London (BFA) and Zurich (AN). For more
information please visit www.basf.com
Head Office
Al-Othman Business Tower 14th floor, King
Saud Road, Al Qashiahm, Dhahran 34232,
P.O. Box 1884 Al-Khobar 31952
Tel: +966 13 853 8600, 13 812 1140
Fax: +966 13 832 8671, 13 912 1822
DESCRIPTION STANDARDS
MasterEmaco 8100 AP is a single component, MasterEmaco 8100 AP is formulated to meet the
solvent borne zinc rich epoxy primer, providing scope of BS 4652, 1971 Type 2.
active galvanic protection to steel. It is a thick grey
liquid of paint-like consistency, recommended for APPLICATION PROCEDURE
use where chloride induced attack on steel and
concrete is involved.
SURFACE PREPARATION:
PRIMARY USES The steel surfaces should be or grit blasted or wire
brushed to remove all traces of corrosion. Ensure
• As a protective coating to steel reinforcing bars no oil, grease or dust is present. Surfaces should
in concrete. be dry.
• As a touch-up primer for damaged galvanised
metal. Apply MasterEmaco 8100 AP immediately after
• As a primer for steel substrates prior to suitable completion of preparation to prevent any
top coating. contamination. Do not leave blasted or prepared
steel uncoated.
ADVANTAGES
• Provides positive protection of steel MIXING:
components against corrosion. MasterEmaco 8100 AP should be thoroughly
• Excellent adhesion to steel. mixed prior to application.
• Easy to use single component material.
• No pot-life restrictions or wastage. APPLICATION:
• Short overcoating time.
Brush the MasterEmaco 8100 AP onto the
prepared substrate, ensuring uniform and full
PACKAGING coverage, particularly on the back face of
MasterEmaco 8100 AP is a single component reinforcement. Repair mortars can be applied as
system, supplied in 1 litre units. soon as the MasterEmaco 8100 AP is dry.
EQUIPMENT CARE
Tools should be cleaned with MasterTop Thinner
No. 2 immediately after use.
MasterEmaco® 8100 AP
DESCRIPTION AND FIELD OF APPLICATION
Store under cover out of direct sunlight and protect
from extremes of temperature. In tropical climates
the product must be stored in an air-conditioned
environment. Shelf life is at least 12 months when
stored as above.
SAFETY PRECAUTIONS
As with all chemical products, care should be taken
during use and storage to avoid contact with eyes,
mouth, skin and foodstuffs. Treat splashes to eyes
and skin immediately. If accidentally ingested, seek
immediate medical attention. Reseal containers
after use.
NOTE
Field service, where provided, does not constitute
supervisory responsibility. For additional information
contact your local BASF representative.
MasterEmaco 8100 AP
Category: Repair
The product should be manufactured by a company certified to conform to the requirements of the quality,
environmental and occupational health & safety standards ISO 9001, ISO 14001 and OHSAS 18001.
Method Statement
(MS)
MS - AD - MasterEmaco 8100 AP (Con ZR) - 10/2013
1. GENERAL:
1.1. The area to be coated shall be marked on the drawings and on the structure.
1.2. All areas not to be coated, but which may be affected by spillage shall be fully masked.
Flora and fauna shall be protected.
1.3. Any further areas to be coated shall be at the discretion of the Engineer and subject to re-
measurement.
1.4. All deviations from the original Bill of Quantities or scope of works must be agreed in writing
with the Engineer before application starts.
1.5. MasterEmaco 8100 AP epoxy primer contains active corrosion inhibiting additives for the
protection of reinforcement steel.
1.6. MasterEmaco 8100 AP is a ready-to-use material that when mixed thoroughly forms a
coating that can be applied by paint brush to the clean exposed reinforcement.
2. PREPARATION:
Surface preparation: Steel reinforcement
2.1. Ensure the steel reinforcement is fully exposed with all concrete removed from behind the
steel.
2.2. Remove all loose surface rust / oxidation by means of wire brushing, grit blasting or high
pressure washing. Wipe surfaces down with a wetted cloth to remove any final traces of
oxidation (dust) and to cool down the steel surface if required.
3. MIXING:
3.1. Mix MasterEmaco 8100 AP with a paddle mounted on a slow-speed drill, or by hand, until
a smooth, lump-free “paint” consistency is achieved. This may take several minutes due to
the high Zinc content that tends to settle at the bottom of the tins during storage.
Page - 1 of 2
MS - AD - MasterEmaco 8100 AP (Con ZR) - 10/2013
4. APPLICATION:
4.1. Substrate temperatures must be a minimum of +5ºC and a maximum of +35ºC. The
minimum temperatures must be maintained during application and for at least 24 hours
thereafter for optimum curing of the product.
As a reinforcement primer:
4.2. Apply the mixed material in an even layer at approx. 0.13 kg/m² to the full circumference of
the prepared reinforcement using a soft paint brush. When the first coat has dried
sufficiently, (approx. 90 minutes) apply a second coat also at 0.13kg’s /m² (7.5m² / Litre)
4.3. It is important that this second layer has sufficiently cured before the repair mortar is
applied. When applying the repair mortar by hand or as a spray applied mortar this can be
done after approximately 2 hours.
5. CLEANING OF TOOLS:
5.1. While still wet clean brushes etc. with MasterTop Solvent No. 2. Once dry/cured the
material can only be removed mechanically.
6. LIMITATIONS:
6.1. Any steel reinforcement that has been treated with MasterEmaco 8100 AP must be over
coated / encapsulated by a repair mortar within 48 hours of application. MasterEmaco
8100 AP is NOT UV resistant and long-term exposure to UV light will degrade the material
and potentially lower its effectiveness as a corrosion inhibitor.
Page - 2 of 2
Material Safety Data Sheets
(MSDS)
Safety data sheet
Page: 1/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
MasterEmaco 8100AP
1.2. Relevant identified uses of the substance or mixture and uses advised against
Flam. Liq. 3
Aquatic Acute 1
Aquatic Chronic 1
Page: 2/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
H226, H400, H410
For the classifications not written out in full in this section the full text can be found in section 16.
Pictogram:
Signal Word:
Warning
Hazard Statement:
H226 Flammable liquid and vapour.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
If applicable information is provided in this section on other hazards which do not result in
classification but which may contribute to the overall hazards of the substance or mixture.
Not applicable
3.2. Mixtures
Chemical nature
cyclohexanone
Content (W/W): >= 0.3 % - < 1 % Flam. Liq. 3
CAS Number: 108-94-1 Acute Tox. 4 (Inhalation - vapour)
EC-Number: 203-631-1 Acute Tox. 4 (oral)
REACH registration number: 01- Acute Tox. 4 (dermal)
2119453616-35 Skin Corr./Irrit. 2
Eye Dam./Irrit. 1
H226, H318, H315, H312, H332, H302
zinc oxide
Content (W/W): >= 3 % - < 7 % Aquatic Acute 1
CAS Number: 1314-13-2 Aquatic Chronic 1
EC-Number: 215-222-5 M-factor acute: 1
REACH registration number: 01- M-factor chronic: 1
2119463881-32 H400, H410
INDEX-Number: 030-013-00-7
2-methoxypropyl acetate
Page: 4/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
Content (W/W): >= 0 % - < 0.2 % Flam. Liq. 3
CAS Number: 70657-70-4 Repr. 1B (unborn child)
EC-Number: 274-724-2 STOT SE 3 (irr. to respiratory syst.)
INDEX-Number: 607-251-00-0 H226, H335, H360D
2-methoxy-1-methylethyl acetate
Content (W/W): >= 3 % - < 7 % Flam. Liq. 3
CAS Number: 108-65-6 H226
EC-Number: 203-603-9
REACH registration number: 01- Exception community workplace exposure limit
2119475791-29 (see section 8)
INDEX-Number: 607-195-00-7
For the classifications not written out in full in this section, including the hazard classes and the
hazard statements, the full text is listed in section 16.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. If breathing difficulties
develop, aid in breathing and seek immediate medical attention.
On skin contact:
Wash thoroughly with soap and water. Under no circumstances should organic solvent be used. If
irritation develops, seek medical attention.
On ingestion:
Rinse mouth and then drink plenty of water. Do not induce vomiting due to aspiration hazard. Do not
induce vomiting unless told to by a poison control center or doctor.
4.2. Most important symptoms and effects, both acute and delayed
Page: 5/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
Symptoms: The most important known symptoms and effects are described in the labelling (see
section 2) and/or in section 11.
4.3. Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
Further information:
The degree of risk is governed by the burning substance and the fire conditions. Containers may
rocket or explode in heat of fire. Keep containers cool by spraying with water if exposed to fire.
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent
systems. Contaminated extinguishing water must be disposed of in accordance with official
regulations.
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to
EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen based on level of activity and exposure., Antistatic apron
Form: liquid
Colour: dark grey
Odour: product specific
Odour threshold:
No applicable information available.
pH value:
not applicable
Flash point: 36 °C (DIN 53213-1)
Flammability: Flammable.
Vapour pressure:
The product has not been tested.
Density: 2.2 g/cm3
(25 °C)
Solubility in water: immiscible
Thermal decomposition: Vapours may form explosive mixture with air. No decomposition if
stored and handled as prescribed/indicated.
Viscosity, dynamic: 1,072 mPa.s
(25 °C)
Page: 8/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
Bulk density:
not applicable
Other Information:
If necessary, information on other physical and chemical parameters is indicated in this section.
Substances to avoid:
strong oxidizing agents
Acute toxicity
Irritation
Page: 9/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
Assessment of mutagenicity:
The chemical structure does not suggest a specific alert for such an effect. Based on available Data,
the classification criteria are not met.
Carcinogenicity
Assessment of carcinogenicity:
The chemical structure does not suggest a specific alert for such an effect. Based on available Data,
the classification criteria are not met.
Reproductive toxicity
Developmental toxicity
Assessment of teratogenicity:
The chemical structure does not suggest a specific alert for such an effect. Based on available Data,
the classification criteria are not met.
Repeated dose toxicity and Specific target organ toxicity (repeated exposure)
Based on our experience and the information available, no adverse health effects are expected if
handled as recommended with suitable precautions for designated uses. The product has not been
tested. The statements on toxicology have been derived from the properties of the individual
components.
The product does not fulfill the criteria for PBT (Persistent/bioaccumulative/toxic) and vPvB (very
persistent/very bioaccumulative).
The product does not contain substances that are listed in Regulation (EC) 1005/2009 on
substances that deplete the ozone layer.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for
recycling after being thoroughly cleaned.
Page: 11/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
SECTION 14: Transport Information
Land transport
ADR
UN number UN1263
UN proper shipping name: PAINT (contains 1-METHOXYPROPANOL-2, ZINC)
Transport hazard class(es): 3, EHSM
Packing group: III
Environmental hazards: yes
Special precautions for Tunnel code: D/E
user: SP 640 E
RID
UN number UN1263
UN proper shipping name: PAINT (contains 1-METHOXYPROPANOL-2, ZINC)
Transport hazard class(es): 3, EHSM
Packing group: III
Environmental hazards: yes
Special precautions for SP 640 E
user:
Sea transport
IMDG
UN number: UN 1263
UN proper shipping name: PAINT (contains 1-METHOXYPROPANOL-2, ZINC)
Transport hazard class(es): 3, EHSM
Packing group: III
Environmental hazards: yes
Marine pollutant: YES
Special precautions for None known
user:
Page: 12/13
BASF Safety data sheet according to Regulation (EC) No. 1907/2006 as amended from time to time.
Date / Revised: 02.10.2015 Version: 2.0
Product: MasterEmaco 8100AP
(ID no. 30601723/SDS_GEN_EU/EN)
Date of print 02.10.2017
Air transport
IATA/ICAO
UN number: UN 1263
UN proper shipping name: PAINT
Transport hazard class(es): 3
Packing group: III
Environmental hazards: No Mark as dangerous for the environment is needed
Special precautions for None known
user:
14.1. UN number
See corresponding entries for “UN number” for the respective regulations in the tables above.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Regulation: Not evaluated
Shipment approved: Not evaluated
Pollution name: Not evaluated
Pollution category: Not evaluated
Ship Type: Not evaluated
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
Full text of the classifications, including the hazard classes and the hazard statements, if mentioned
in section 2 or 3:
Flam. Liq. Flammable liquids
Aquatic Acute Hazardous to the aquatic environment - acute
Aquatic Chronic Hazardous to the aquatic environment - chronic
STOT SE Specific target organ toxicity — single exposure
Acute Tox. Acute toxicity
Skin Corr./Irrit. Skin corrosion/irritation
Eye Dam./Irrit. Serious eye damage/eye irritation
Repr. Reproductive toxicity
H226 Flammable liquid and vapour.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H336 May cause drowsiness or dizziness.
H318 Causes serious eye damage.
H315 Causes skin irritation.
H312 Harmful in contact with skin.
H332 Harmful if inhaled.
H302 Harmful if swallowed.
H335 May cause respiratory irritation.
H360D May damage the unborn child.
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. The data do not describe the product's
properties (product specification). Neither should any agreed property nor the suitability of the product for
any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility
of the recipient of the product to ensure any proprietary rights and existing laws and legislation are
observed.
Vertical lines in the left hand margin indicate an amendment from the previous version.
Approvals
(AP)
I" dar a l -halid asah
[D-35075
"I!~'~IIIII ~~~~III
~~w~U~~~
dar al-handasah SAUDI BINLADIN GROUP
shalr and partners
ABRAJ KUDAI
TO THE ENGINEER:
We request the Engineer's approval on the follOWing Materials
Attach all relevant technlcallrterature marked to Identrfy relevant descnptlon. current test certificates samples as appropnate
2- MANUFACTURER I SU PPLIER
Company Name BASF Vendor No
Address Jeddah PO 9303 Baladya Road
Local Agen t BASF SA Ltd listed In Approved Project Vendor's Li st
3· DELIVERY STATUS
Country of Orig in KSA Delivery Duratton •
AvaIlability Estim ated Date of Arrival on SIte .
Delivery Program Latest Date for order '
Date of Material ReqUired on Site
We certify that the above submitted Items have been reviewed In detail and are correct and In stnct con formity With the contract drawmgs
and speclflcatlons except as they Will supply the submitted Items In fu ll conformi 'I With timely delivery otherwise stated and also that the
matenal sources Indicated above have been reviewed to detail and that
FOR: THE CONTRACTOR
Dept. I-lead: Doc. Con trol Manager:
QA/QC Ocpl. : ~
Proj ect Manager:
~NCOOE
A Ap proved As Submitted D B Approved Except as Noted Dc Revise - Resubmit D 0 : Rejected
Approval shall not re lieve the Contractor of liS obligations and liabilities under the contract or constltue authonza1ron of any change
to Con tract Documents. and therefore, shall not I m r y recognrtlOn W~ of additiona l time or cost to the contract
Development Project
dar al-handasah
.. ..>~'Z._At.~... I~~ ........ c.. .. l ...""JI ~,..........Jt
(Phase I) . . ._ _ shair and parlners
<:~.","''''.'''''Il;f A.l<tl'?ll·~rll:"'" <:",t' C:I","'1 ............ ""tlu'.
Jeddah, KSA
Contract NoJTiiie : ..;- j 0-421-PF-O -Terminal COrr:pnSx, COlli,,_; -;uwer and Supporting Facilities.
r 4. Rejected.
Review Comments:
1. The submitted material epoxy based zinc rich is not mentioned in project specification,
however. Contractor can use for the repairing of deep defective concrete where steel is
to be exposed, provided to submit a complet~_ cQJlcrete-ce.paicsystem in accordance
with type of Concrete repai;-as per project specification section 03300-0--:2~-i4-,and 2.16
2. The use of the mate~ial will be subject to the approval of the Engineer after specifying
the concerned '
The Construction Manager's approval shall not in anyway relieve the Contractor from full compliance with contractual obligations. i
Commented by: Issued by:
t1. aIJ
~
/'/1....,_
.
r1
~-;U'\N'"
"----
41\'
OSM/MQU 28 June 2011 John Macdonald 28 June 2011
Initial/Signature Over Printed Name Date ......, Project Manager Date
To Mis. BASF
Attn Mr. Ah med A.Sattar
Mr. Tamer Hassa n
S Submittal Approval
Ref. Description
# Code
TEC/ STEEL PROTECTION MATERIAL
1 PROTECTION B
MATERIAL! 32 (CONCRESIVE ZR)
Regards,
pagees 13
I
2. SUBMITIAl DESCRIPTION:
TCHNICAl DATASHEET
SPECIFICATION CLAUSE
APPROVALS
JOP REFERENCES
ISO CERTIFICATES
Technical ma nager
Mr. Sayed Ismail
~ --£
.--:::::--
b Projec t manager
Mr. A. Abdul haleem
~
--
Tith se ction w iU be use~~vlng Authori tyonly. /"
3. ENGINEER'S REPRESENTATIVE'S COMMENTS:
AJ Approved 0
.•.. ~~1f"h~~"'1V~«>t;""'~ (
~roved as noted CI
C) Re vise & Resubmit 0
. . . .... . ........ . ". ... . ,~ . _ . . .:;;.-u< . ~~\C . If
t"Jh'f,ht~.fill\.
1 \J J
o..~ ~~ """"""~
I J
..
\ ~
Eng. Name.
A<:
.... . .... . . . . .. . \..,L .Signature .
. .
. .Da(e.
Apptoval sh alt nol contractor of ~ '} lIabitit es under I ~ e con tr act or comtltu(e au thOrizati on of any r.ha'1ge 10 contract docum ents
BY: -------------------
Job References
(JR)
International Job References – MasterEmaco 8100 AP (Formerly known as Concresive ZR)
DATE PROJECT CONTRACTOR CONSULTANT
2010/03 CONSTRUCTION WORKS FOR REFURBISHMENT OF MAFRAQ, GHANTOOT, BIN HAM ELECTRO MECHANICAL PARSONS INTERNATIONAL LIMITED
AL KHATIM WWTPS & ASSOCIATED WORKS, ABU DHABI
2010/01 ABU DHABI INVESTMENT COUNCIL NEW HEADQUARTERS AL FUTTAIM CARILLION LLC DIAR CONSULT
(2B+GF+PODIUM+MF+ 1ST TO 26 FLOOR) AT PLOTS C-70 & C-71, SECTOR
EAST 25
2009/07 AL SAFOOH TRANSIT SYSTEM SIX CONSTRUCT LTD. SYSTRA
Pag
International Job References – MasterEmaco 8100 AP (Formerly known as Concresive ZR)
DATE PROJECT CONTRACTOR CONSULTANT
2003/05 WATERPROOFING, UCH POWER PLANT, PAKISTAN MUGHAL POWER / UCH POWER UCH POWER
2003/01 POWER HOUSE, GHAZI BAROTHA CONTRACT NO.3, PAKISTAN DEC BAROTHA CONTRACTORS NESPAK
AHMADIAH CONTRACTING & TRADING
2003 FAHAHEEL WATER FRONT DEVELOPMENT PROJECT, FAHAHEEL, KUWAIT GULF CONSULT
CO.
2002/07
NADD AL SHEEBA MAJLIS REPAIRS, DUBAI, UAE KHANSAHEB CIVIL ENGINEERING LLC RULER’S OFFICE
-08
SAN JUAN CONSTRUCTION / LAINGS
2001/11 DIEGO GARCIA US NAVAL BASE, INDIAN OCEAN ISLANDS
INTERNATIONAL
2000/08 AL JIMI SHOPPING CENTRE, AL AIN, UAE PIVOT CRSS
2000/08 KILN SUPPORT COLUMN REPAIRS – AL AIL CEMENT FACTORY DICOTECH IHI - DUBAI
2000/07 3 SCHOOLS FOR MINISTRY OF PUBLIC WORKS, DUBAI, UAE AL BADIYAH CONTG. CO. MINISTRY OF PUBLIC WORKS
DUBAI MUNICIPALITY, ARCHON
2000/07 2 SCHOOLS FOR DEZ, DUBAI MUNICIPALITY, DUBAI, UAE AL HALLAWI CONTRACTING CO.
CONSULTANT
REFURBISHMENT & EXPANSION PROJECT, STRUCTURAL & DEMOLITION NORR GROUP CONSULTANTS
1999/07 KHANSAHEB CIVIL ENGINEERING LLC
WORKS PACKAGE 18106, DUBAI, UAE INTERNATIONAL LTD.
1996/09 S.A.S. BAGALLAH PROJECT, KUWAIT MARAFI CONTRS. PACE (PAN ARAB CONSULTS & ENGRS).
Pag
Test Reports
(TR)
LEED Certificate
(LC)
D•BASF
We create chemistry
Manufacturing Location
Dammam, Kingdom of Saudi Arabia
Recycled Content
Saudi BASF for Building Materials Co. Ltd. certifies that MasterEmaco® 8100 AP has
neither post-consumer nor pre-consumer recycled contents.
VOC Content
SAUDI BASF certifies that the VOC (Volatile Organic Compound) of MasterEmaco® 8100
AP is less than 570 g/ltr.
- - DO.:_,, . -
:"" 'r.: - ,,...
i :i .. '.
Technical Manager
Saudi and Near East
r ·O · -rv,r- �.)½;',;L;.....:;�JL,u0_JtL. \ 1 t,".M....ll JL...ll <.)"i .) ½-'_,..,..._JI ½. _y-- II a <),, ii ".- '-'j-'=--'> ;\.,J�d:, 4$�
+�"\"\ \l"Alrrn� :c,-SL..... +�"\"\ \I' AIY \Yr\ :.....:;LA -=.1.,........._JI ¼�l;;<J...._JI. r'L,..JI ,;;_,.;WI 4.;-C�l�I OA�J,Y-_,b.�I�\
A private Company Incorporated with limited liability in t he KSA, Paid Up Share Capital SR 11 Million, Commercial Registration No. 2050037620
Regist ered Office, Street No 58, Dammam 2nd Industrial Area, Saudi Ar abia, Tel: +966 13 812 1231. Fax: +966 13 812 3269
Master Builders Solutions from
BASF for the Construction Industry
MasterAir® MasterGlenium® MasterRoc®
Complete solutions for air Solutions for hyperplasticized Solutions for underground
entrained concrete cncrete construction
MasterBrace® MasterInject® MasterSeal®
Solutions for concrete Solutions for concrete injection Solutions for waterproofing and
strengthening MasterKure® sealing
MasterCast® Solutions for concrete curing MasterSet®
Solutions for the manufactured MasterLife® Solutions for set control
concrete product industry Solutions for enhanced durability
MasterTile®
MasterCem® MasterMatrix® Solutions for tile fixing system
Solutions for cement manufacture Advanced rheology control
MasterEase® solutions for self-consolidating MasterTop®
Solutions for reducing concrete concrete Solutions for industrial and
viscosity commercial floors
MasterPel®
MasterEmaco® Solutions for water tight concrete
MasterWeld®
Solutions for concrete repair MasterPolyheed® Adhesive solutions for
MasterFinish® Solutions for mid-range concrete construction
Solutions for formwork treatment MasterPozzolith® Master X-Seed®
MasterFlame® Solutions for water-reduced Advance addelerator solutions for
Complete firestopping solutions concrete concrete
MasterFlow® MasterProtect®
Ucrete®
Solutions for precision grouting Solutions for concrete protection
Flooring solutions for harsh
MasterFiber® MasterRheobuild® environments
Comprehensive solutions for fiber Solutions for high strength
reinforced concrete concrete
Contact Information:
Head Office Registered Office / Factory AI-Khobar Sales Office Jeddah Sales Office
Al-Othman Business Tower 14th Floor, King P.O. Box 1884 AI-Khobar 31952 , Tel.: +966 13 808 4896 Tel: +966 12 639 4799
Saud Road, Al Qashlah, Dhahran 34232, Road No. 58, Hail Street , 2nd Ext: 73 / 75 12 639 5702
P.O. Box 1884, Al Khobar 31952 Industrial City, Dammam, KSA Fax : +966 12 639 4934
Tel: +96613 8538600, 13812 1140 Tel.:+966 13 812 1140 Riyadh Sales Office
Fax : +966 13 832 8671, 13 812 1822 Fax:+966138121822 Tel.:+966 11 2790971 / 72 Abha Sales Office
Fax : +966 11 279 0970 Tel.:+966 17 274 8255
www.master-builders-solutions.sa
enquirycc.saudi@basf.com