Professional Documents
Culture Documents
Specified as a safety device, the water level limiter serves The water level limiter 933 must be installed as an ex- Fig. 2
to protect boilers in closed circuit heating systems against ternal appliance in parallel to the radiator supply line of
water deficiency. Further it may be used, wherever a the boiler in a vertical position.
control dependent on the water level is useful.
For electrical connection see fig.1.
Design
The water level limiter is a glandless device with magnetic Electric circuit diagramm :
transmission of float movement to a microswitch. Type
933.1 with built-in interlock. Type 933.2 without interlock. Interlock bypass button
Working pressure: max. 10 bar For operation, pull check pin upwards and push interlock
Operating temperature: max. 120°C bypass button.
Connecting cable: H 05 VV-F 4G 0,75mm²,
lenght 2,5m
Cable coding: yellow/green - protective Maintenance
conductor
black - phase At the beginning of the heating period, the water level
grey - burner WLL = water level limiter limiter should be checked at regular intervals, or at least
STL = safety temperature limiter once a year to ensure proper function.
brown - malfunction indicator
TR = temperature regulator For this, puch the check pin downwards. The float is lo-
Degree of protection: IP 65
Microswitch: Changeover contact; wered and the system is disconnected. When the check
Fig. 1
1pole switching pin is pulled out upwards to its initial position the system
Capacity: 10 (4) A / 250V 0T55 must remain disconnected. Reconnection takes place
by actuating the interlock bypass button.
9.0001.05 1837
Please note : Spare parts
The water level limiter, type 933.1 features a built-in
ARMATUREN
interlock and can be directly connected into the control Made in Germany
circuit. Interlock deactivation takes place at the water
level limiter. The water level limiter, type 933.2 does not 0933.20.911
have an interlock. This interlock must be provided via check pin
the following electrical circuit.
The enclosed instructions for use must be placed in the
heating room in good view of the user, and the contained
0933.20.912
micro switch Instructions for use
information must be observed during operation. 0933.20.904
If the water level limiter should fail to function properly, switching unit
even after following the directions in this instructions and
checking the electrical connection, the complete switch
unit can be replaced with the system filled, provided the 0933.20.910
float is not damaged. float unit
For this, slowly loosen and unscrew the nickel-plated
hexagon (fig.3, [1]), a slight amount of water may be
0933.20.906
discharged. The system is sealed off from the outside
float
by means of an incorporated sealing element, which
opens and renders the system operational when the 0933.20.900
new switching unit is screwed in. Valve without housing
Fig. 3
Captive nut
Socket
[1]
Seal
Seal
10-7603.003.00