The Zone Concentrators are intended to group the various
Sensors by zones. They centralize the information provided by the Sensors, process it and propagate it to higher levels (Data Concentrators).
Properties: Technical Specifications:
Communications The centralization of the information of the Sensors managed by this Concentrator is carried out automatically. Interface to higher levels UTP RJ45 Cat5e cable The Zone Concentrators are located in the middle of the bus Interface to sensors 5-PIN JST connector of Sensors that they manage. In addition, they facilitate the Protocol Half-duplex RS-485 automated addressing of each of the Sensors that are part Communication speed 9600 bps of said zone. This feature makes it very quick to commission the system, as it minimizes the manual operations required. Mechanical Specifications Weight 42 g | 1.48 oz Dimensions 63 x 63 mm | 2.48 x 2.48 in FR4 PCV Installation: Base material Protection Grade IP54 Installation without the need for screws. Electrical Specifications The PCA (circuit board) is installed on a plastic base that snaps onto the aluminum bar. To guarantee an IP54 degree Supply voltage 30 vdc of protection, the PCA must be protected with a plastic Maximum consumption up to 2W cover. Environmental Specifications The Zone Concentrator must be installed at the midpoint Operating temperature: from -20 to 60 ºC | from -4 to +140 ºF of the zone bus. Storing temperature: from -30 to 70 ºC | from -22 to 158 ºF
400+ CUSTOMERS 50+ COUNTRIES 500K+ PARKING SPACES
LARGEST SELECTION OF sales@parkhelp.com
PARKING GUIDANCE TECHNOLOGY www.parkhelp.com
International Offices: United States, Spain, Brazil & New Zealand 03/02/21 - 1