Professional Documents
Culture Documents
Solution
Î Install or upgrade SDT270 driver
; !!! Please note: you need administrative rights on the computer !!!
After you’ve connected the device, the computer may automatically show the
window “Found new hardware wizard”.
If it does appear:
Î click the “Next” button
Î continue with step 2 c).
b) Manually start driver installation
(follow this step only if the “add hardware wizard” is not started automatically)
Î Right click the option “Linux USB Ethernet/RNDIS Gadget” and click “update
driver…”
Î Select the second option (“…specific location”) and continue with step 2 c)
c) Actual driver installation
After following the previous step(s), you should see the following window.
Î Make sure that you select the same options as in the screenshot above.
Î The location should be set to:
Æ if UAS was installed:
C:\Program Files\SDT\Ultranalysis Suite\Resources\Drivers
Æ if DataDump was installed:
C:\Program Files\SDT\SDT270 Data Dump\Resources\Drivers
Î After the installation, click “Finish”. Now the SDT270 device should be
recognized by Windows and the import/export functionality will function
properly.
IMPORTANT: in Windows XP, the driver needs to be installed for each USB
port the SDT270 device will be connected to.
For example: if the computer has two USB ports in front of the pc, follow the
next step.
Î Disconnect the SDT270 from the current USB port.
Î For the second USB port, repeat the above steps.