Professional Documents
Culture Documents
KKRZ-8LPPV8 R13 en SRC
KKRZ-8LPPV8 R13 en SRC
Uniflair™ LE DX
208/230/460/575V, 3 Ph, 60 Hz, 15 – 100 kW
5 – 30 ton
Schneider Electric IT Corporation Legal Disclaimer
The information presented in this manual is not warranted by the Schneider Electric IT Corporation to be authoritative,
error free, or complete. This publication is not meant to be a substitute for a detailed operational and site specific
development plan. Therefore, Schneider Electric IT Corporation assumes no liability for damages, violations of codes,
improper installation, system failures, or any other problems that could arise based on the use of this Publication.
The information contained in this Publication is provided as is and has been prepared solely for the purpose of
evaluating data center design and construction. This Publication has been compiled in good faith by Schneider
Electric IT Corporation. However, no representation is made or warranty given, either express or implied, as to the
completeness or accuracy of the information this Publication contains.
IN NO EVENT SHALL SCHNEIDER ELECTRIC IT CORPORATION, OR ANY PARENT, AFFILIATE OR
SUBSIDIARY COMPANY OF SCHNEIDER ELECTRIC IT CORPORATION OR THEIR RESPECTIVE OFFICERS,
DIRECTORS, OR EMPLOYEES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE,
SPECIAL, OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS, CONTRACT, REVENUE, DATA, INFORMATION, OR BUSINESS INTERRUPTION) RESULTING
FROM, ARISING OUT, OR IN CONNECTION WITH THE USE OF, OR INABILITY TO USE THIS PUBLICATION
OR THE CONTENT, EVEN IF SCHNEIDER ELECTRIC IT CORPORATION HAS BEEN EXPRESSLY ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SCHNEIDER ELECTRIC IT CORPORATION RESERVES THE RIGHT
TO MAKE CHANGES OR UPDATES WITH RESPECT TO OR IN THE CONTENT OF THE PUBLICATION OR THE
FORMAT THEREOF AT ANY TIME WITHOUT NOTICE.
Copyright, intellectual, and all other proprietary rights in the content (including but not limited to software, audio,
video, text, and photographs) rests with Schneider Electric IT Corporation or its licensors. All rights in the content not
expressly granted herein are reserved. No rights of any kind are licensed or assigned or shall otherwise pass to
persons accessing this information.
This Publication shall not be for resale in whole or in part.
Table of Contents
Technical Data...................................................................1
Model Number Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Overview............................................................................ 2
Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Airflow Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Upflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Downflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Air Cooled Direct Expansion Units . . . . . . . . . . . . . . . . . . . . . . 5
Twin-Cool Direct Expansion Units
(Air-cooled or Water-cooled) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Energy-Saving Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Sound Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Sound pressure measurement positioning . . . . . . . . . . . . . . . 30
Test results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Dimensional Data.............................................................36
Overall Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Plenums/Sub-Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Seismic Floorstands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Pump Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Pump performance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Pump dimensional data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pump package and enclosure SKUs . . . . . . . . . . . . . . . . . . . . 58
Microprocessor Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Open architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Control type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Warranty .......................................................................... 64
T D A V 33 4 2 G
IDENTIFYING PREFIX
AIRFLOW PATTERN
U = UPFLOW
D = DOWNFLOW
FAN TYPE
V = CENTRIFUGAL (EC) FANS WITH BACKWARD-CURVED BLADES
na4117a
POWER SUPPLY VOLTAGE
D = 208 – 230 V/3 Ph/60 Hz
G = 460 V/3 Ph/60 Hz
L = 575 V/3 Ph/60 Hz
Double-Walled Panels The external panels are double-wall-lined internally with fiberglass heat-insulating
material 15 mm (0.59 in.) thick and 20 kg/m3 (0.000723 lbs/in3) of density. Panels are
coated on the external side with epoxy-polyester paint, which ensures long-term
durability.
Electronic Expansion Valve The EEV provides accurate control of the refrigerant superheat in order to ensure an
increase in efficiency at low external temperatures because it enables the unit to
operate at much lower condensing pressures than would be possible with a traditional
mechanical valve.
Electronically Commutated Uniflair DX units come standard with highly efficient and reliable EC (Electronically
Fans Commutated) fans, which are quiet, low maintenance, and produce very low vibration.
Full Front Service Access Uniflair DX units were designed for all service to be available through the front of the
unit (914 mm (36 in.) service clearance recommended).
Group Control Up to 10 Uniflair DX units are able to communicate with each other for redundancy,
demand-fighting prevention, mode assist, and global sharing of certain settings.
Hydrophilic Coated Coil Hydrophilic coating on the coil allows condensate water to more efficiently flow to the
pan at the bottom and provides anti-microbial and corrosion protection.
Interior Panels Uniflair DX units are equipped with internal panels for isolation of the compartments
with hazardous rotating fans. Interior panels ensure reduction in noise as well as the
ability to operate the unit with the doors open during servicing.
MERV 8 Filters Uniflair DX units use MERV 8 filters to maintain a clean, particle-free environment
required in the data center space.
Main Power Disconnect A non-fused main power switch disconnects all high voltage power to the unit if
necessary. The disconnect switch is accessible from the exterior of the unit.
Tandem Scroll Compressors Tandem compressors (for dual circuits only) increase efficiency by utilizing an
oversized coil for one compressor during part load operation and allow for multiple
stages of cooling capacity when heat loads are increasing or decreasing. Crankcase
heaters come standard with all compressors.
Network Management Card Standard Ethernet connection for SNMP, Modbus, or Web.
(NMC)
Upflow units are designed to distribute air through a supply plenum, pre-engineered duct system, or drop
ceiling. Return air can enter the unit via the front, rear, or bottom of the unit based on configuration. A sub-base
is required to allow access for power, water, and refrigerant connections on non-raised floor installations.
na3718a
FRONT RETURN WITH BOTTOM RETURN WITH FRONT RETURN WITH *REAR RETURN WITH
TOP SUPPLY TOP SUPPLY TOP FRONT SUPPLY TOP SUPPLY
(PLENUM AND GRILLE)
*Units 2242, 2542, 2842, and 3342 are not available in Upflow-Rear Return.
Downflow
Downflow units are designed to distribute air through a void under a raised access floor or a front supply sub-
base plenum when a raised floor is not available. Return air enters the top of the unit directly from the
environment or through a duct system. na3721a
Air-cooled DX units extract heat from the room and transfer it to the outside using air-
cooled refrigerant heat exchangers (condensers). The room unit and external
condenser form an autonomous sealed circuit once installed. Each refrigeration circuit
must be connected to its remote air-cooled condenser with copper pipe for the
discharge of gas and one for the liquid return.
na3888a
Water Cooled Direct Expansion Units
In DX water-cooled units, the heat extracted from the room is transferred to water via
a stainless steel brazed plate heat exchanger within the unit. The cooling water may
be fed from the main supply, a cooling tower or a well (open circuit), or recycled in a
closed loop cooled by external coolers.In the latter case, an anti-freeze mixture of
water and ethylene glycol is normally used. The water cooled units have the
advantage that the refrigerant circuits are charged and sealed in the factory. This
makes installation extremely simple, eliminating the need for any site-installed
refrigerant piping.
na3889a
Twin-Cool Direct Expansion Units
(Air-cooled or Water-cooled)
As the external temperature falls, the coolant can be used directly for
the free-cooling of the air.
In this case the coolant is circulated in the coil inside the unit, and
both the refrigerant circuit and the glycol circuit contribute to cooling,
thus reducing the energy used by the compressor.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter.
NOTE: Contact the local sales representative for special conditions.
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
Model 0511 0921 1121 1422 1622 1822 2242 2542 2842
Filters – Pleated Disposable
Downflow
Filter 1
Quantity 2 3 4 5 5 5 5 5 5
Size (mm) 830 × 445 845 × 397 845 × 397 845 × 410 845 × 410 845 ×4 10 785 × 486 785 × 486 785 × 486
Depth (mm) 45 95 95 95 95 95 95 95 95
Filter 2
Quantity
Size (mm) N/A N/A N/A N/A N/A N/A N/A N/A N/A
Depth (mm)
Upflow – Bottom or Front Return
Filter 1
Quantity 2 3 4 5 5 5 3 3 3
Size (mm) 830 × 445 845 × 397 845 × 397 845 × 410 845 × 410 845 ×4 10 1020 × 423 1020 × 423 1020 × 423
Depth (mm) 45 95 95 95 95 95 95 95 95
Filter 2
Quantity 2 2 2
Size (mm) N/A N/A N/A N/A N/A N/A 970 × 555 970 × 555 970 × 555
Depth (mm) 95 95 95
Upflow – Rear Return
Filter 1
Quantity 2 3 4 5 5 5
Size (mm) 830 × 445 845 × 397 845 × 397 845 × 410 845 × 410 845 ×4 10 N/A N/A N/A
Depth (mm) 45 95 95 95 95 95
Filter 2
Quantity
Size (mm) N/A N/A N/A N/A N/A N/A N/A N/A N/A
Depth (mm)
Approximate Weight
kg 280 430 548 698 714 714 910 930 1098
lbs 618 948 1209 1539 1575 1575 2006 2051 2421
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter.
NOTE: Contact the local sales representative for special conditions.
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter.
NOTE: Contact the local sales representative for special conditions.
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter.
NOTE: Contact the local sales representative for special conditions.
NOTE: All data tested in accordance with ASHRAE 127.
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
Free-cool mode
Model 0511 0921 1121 1422 1622 1822 2242 2542 2842
Net Cooling Capacity Data
75°F DB, 61°F WB, 52°F DP (23.9°C DB, 16.1°C WB, 11.1°C DP) 44.6% RH
BTU/Hr 35000 50000 70000 104000 104000 110000 245000 245000 245000
Total
kW 10.4 14.6 20.4 30.6 30.6 32.3 71.7 71.8 71.7
BTU/Hr 35000 50000 70000 104000 104000 110000 244000 245000 244000
Sensible
kW 10.4 14.6 20.4 30.6 30.6 32.3 71.6 71.7 71.6
80°F DB, 63°F WB, 52°F DP (26.7°C DB, 17.1°C WB, 11.1°C DP) 37.8% RH
BTU/Hr 46000 63000 90000 134000 134000 141000 303000 303000 303000
Total
kW 13.4 18.4 26.3 39.2 39.2 41.2 88.8 88.9 88.8
BTU/Hr 46000 63000 90000 134000 134000 141000 303000 303000 303000
Sensible
kW 13.4 18.4 26.3 39.2 39.2 41.2 88.7 88.8 88.7
85°F DB, 64°F WB, 52°F DP (26.7°C DB, 18°C WB, 11.1°C DP) 32.2% RH
BTU/Hr 56000 76000 109000 162000 162000 170.266 359000 359000 359000
Total
kW 16.3 22.4 32.0 47.5 47.5 49.9 105.1 105.2 105.1
BTU/Hr 56000 76000 109000 162000 162000 170.266 358000 358000 358000
Sensible
kW 16.3 22.4 32.0 47.5 47.5 49.9 105.0 105.0 105.0
NOTE: All values are accurate to +/– 5% and based on nominal fan speed with standard filter
NOTE: Contact the local sales representative for special conditions
NOTE: All data tested in accordance with ASHRAE 127.
Model 0511 0921 1121 1422 1622 1822 2242 2542 2842
Filters (MERV 8) – Pleated Disposable
Downflow
Filter 1
Quantity 2 3 3 2 2 2 3 3 3
Size (mm) 830 x 421 845 x 376 845 x 375 845 x 376 845 x 376 845 x 376 1020 x 410 1020 x 410 1020 x 410
Depth (mm) 45 95 95 95 95 95 95 95 95
Filter 2
Quantity 1 3 3 3 2 2 2
Size (mm) N/A N/A 845 x 397 845 x 410 845 x 410 845 x 410 970 x 555 970 x 555 970 x 555
Depth (mm) 95 95 95 95 95 95 95
Upflow – Bottom or Front Return
Filter 1
Quantity 2 3 3 2 2 2 3 3 3
Size (mm) 830 x 421 845 x 376 845 x 375 845 x 376 845 x 376 845 x 376 1020 x 410 1020 x 410 1020 x 410
Depth (mm) 45 95 95 95 95 95 95 95 95
Filter 2
Quantity 1 3 3 3 2 2 2
Size (mm) N/A N/A 845 x 397 845 x 410 845 x 410 845 x 410 970 x 555 970 x 555 970 x 555
Depth (mm) 95 95 95 95 95 95 95
Upflow – Rear Return
Filter 1
Quantity 2 3 3 2 2 2
Size (mm) 830 x 421 845 x 376 845 x 375 845 x 376 845 x 376 845 x 376 N/A N/A N/A
Depth (mm) 45 95 95 95 95 95
Filter 2
Quantity 1 3 3 3
Size (mm) N/A N/A 845 x 397 845 x 410 845 x 410 845 x 410 N/A N/A N/A
Depth (mm) 95 95 95 95
Approximate Weight
kg 280 430 548 698 714 714 910 930 1098
lbs 618 948 1209 1539 1575 1575 2006 2051 2421
Values are derived using the Darcy-Weisbach pressure drop equation at 50°F and 1 atmosphere and Type L copper pipe.
All correction factors are based on the unit entering the following conditions:
29.4°C (85°F) DB/18.1°C (64.5°F) WB,2832 l/s (6000 CFM), 1.72 l/s (27.3 GPM), and 7.2°C (45°F) EFT.
*Multiply capacity of device or system by factor above for % solution.
**Multiply pressure drop of system by factor above for % solution.
***Glycol concentrations over 50% are not recommended.
Values are derived using the Darcy-Weisbach pressure drop equation at 50°F and 1 atmosphere and Type L copper pipe.
All correction factors are based on the unit entering the following conditions:
29.4°C (85°F) DB/18.1°C (64.5°F) WB,2832 l/s (6000 CFM), 1.72 l/s (27.3 GPM), and 7.2°C (45°F) EFT.
*Multiply capacity of device or system by factor above for % solution.
**Multiply pressure drop of system by factor above for % solution.
***Glycol concentrations over 50% are not recommended.
1 m (3.28 ft)
na3383a
2 m (6.56 ft)
Downflow
5740 m3/h @ 20 Pa
TD*V0511 24.7 44.5 39.8 36.0 34.7 26.4 21.5 46.6
(3378 CFM @ .08 in WC)
8220 m3/h @ 20 Pa
TD*V0921 63.6 63.6 56.4 47.1 43.1 37.1 30.5 52.4
(4838 CFM @ .08 in WC)
12230 m3/h @ 20 Pa
TD*V1121 62.3 67.9 56.4 49.3 41.3 36.2 29.5 54.4
17198 CFM @ .08 in WC)
TD*V1422
16030 m3/h @ 20 Pa
TD*V1622 63.8 69.4 57.9 50.8 42.8 37.7 31.0 55.9
(9435 CFM @ .08 in WC)
TD*V1822
22000 m3/h @ 20 Pa
TD*V2242 65.2 73.3 59.3 50.8 44.5 40.8 38.1 58.8
(12949 CFM @ .08 in WC)
23000 m3/h @ 20 Pa
TD*V2542 65.5 73.6 59.5 51.2 44.9 41.2 38.5 59.8
(13537 CFM @ .08 in WC)
TD*V2842 23500 m3/h @ 20 Pa
65.9 74.3 60.1 51.6 45.4 41.8 39.5 59.8
TD*V3342 (13832 CFM @ .08 in WC
*Designates type of heat rejection.
280 (617)
3 0511 1960 (77.17) 1010 (39.76) 750 (29.53)
430 (948)*
4 0921 1960 (77.17) 1310 (51.57) 865 (34.06) 430 (948)
Upflow and
5 1121 1960 (77.17) 1720 (67.72) 865 (34.06) 548 (1208)
Downflow
1422 1960 (77.17) 2159 (85.00) 865 (34.06) 698 (1539)
6 1622 1960 (77.17) 2159 (85.00) 865 (34.06)
714 (1574)
1822 1960 (77.17) 2159 (85.00) 865 (34.06)
Upflow 1960 (77.17)
2242 2580 (101.57) 865 (34.06) 910 (2006)
Downflow 2175 (85.63)
Upflow 1960 (77.17)
2542 2580 (101.57) 865 (34.06) 930 (2050)
Downflow 2175 (85.63)
7
Upflow 1960 (77.17)
2842 2580 (101.57) 865 (34.06)
Downflow 2175 (85.63)
1098 (2421)
Upflow 1960 (77.17)
3342 2580 (101.57) 865 (34.06)
Downflow 2175 (85.63)
*TD/UAV511
Note: Motorized damper option adds 152 mm (6 in.) in height.
TOP AIR DISCHARGE PLENUM 500 mm (20 in.) SUB-BASE 200 mm (8 in.)
C C
B B
A A
TOP AIR DISCHARGE PLENUM 305 mm (12 in.)* SUB-BASE 500 mm (20 in.) NO GRILLE
C B C B
A A
na3669a
FRONT DISCHARGE PLENUM 500 mm (20 in.) SUB-BASE 500 mm (20 in.) FRONT DISCHARGE
ACPL75110 Blue
ACPL75130 White 500 1010 750 37.00
3
ACPL75131 Gray (19.69) (39.76) (29.53) (81.57)
ACPL75132 Black
ACPL75111 Blue
ACPL75133 White 500 1310 865 45.00
4
ACPL75134 Gray (19.69) (51.57) (34.06) (99.21)
ACPL75135 Black
ACPL75112 Blue
Top discharge or
ACPL75136 White 500 1720 865 53.50
return plenum 5
ACPL75137 Gray (19.69) (67.72) (34.06) (117.95)
500 mm (20 in.)
ACPL75138 Black
ACPL75113 Blue
ACPL75139 White 500 2170 865 62.00
6
ACPL75140 Gray (19.69) (85.43) (34.06) (136.70)
ACPL75141 Black
ACPL75114 Blue
ACPL75142 White 500 2582 865 70.00
7
ACPL75143 Gray (19.69) (101.65) (34.06) (154.30)
ACPL75144 Black
ACPL75150 Blue
ACPL75151 White 305 1010 750 20.00
3
ACPL75152 Gray (12.00) (39.76) (29.53) (44.10)
ACPL75153 Black
ACPL75154 Blue
ACPL75155 White 305 1310 865 23.00
4
ACPL75156 Gray (12.00) (51.57) (34.06) (50.70)
ACPL75157 Black
ACPL75158 Blue
Top discharge or
ACPL75159 White 305 1720 865 27.00
return plenum 5
ACPL75160 Gray (12.00) (67.72) (34.06) (59.53)
305 mm (12 in.)
ACPL75161 Black
ACPL75162 Blue
ACPL75163 White 305 2170 865 32.00
6
ACPL75164 Gray (12.00) (85.43) (34.06) (70.54)
ACPL75165 Black
ACPL75166 Blue
ACPL75167 White 305 2582 865 36.00
7
ACPL75168 Gray (12.00) (101.65) (34.06) (79.36)
ACPL75169 Black
ACPL75105 Blue
ACPL75115 White 500 1000 740 38.00
3
ACPL75116 Gray (19.69) (39.37) (29.13) (83.78)
ACPL7517 Black
ACPL75106 Blue
ACPL75118 White 500 1300 855 50.00
4
ACPL75119 Gray (19.69) (51.18) (33.66) 110.20)
ACPL75120 Black
ACPL75107 Blue
Front discharge
ACPL75121 White 500 1710 855 59.00
plenum 5
ACPL75122 Gray (19.69) (67.32) (33.66) (130.10)
500 mm (20 in.)
ACPL75123 Black
ACPL75108 Blue
ACPL75124 White 500 2160 855 74.00
6
ACPL75125 Gray (19.69) (85.04) (33.66) (163.10)
ACPL75126 Black
ACPL75109 Blue
ACPL75127 White 500 2572 855 87.00
7
ACPL75128 Gray (19.69) (101.26) (33.66) (191.80)
ACPL75129 Black
ACSB76140 Blue
ACSB76150 White 200 1000 740 17.70
3
ACSB76151 Gray (7.87) (39.37) (29.13) (39.02)
ACSB76152 Black
ACSB76141 Blue
ACSB76153 White 200 1300 855 21.80
4
ACSB76154 Gray (7.87) (51.18) (33.66) (48.06)
ACSB76155 Black
ACSB76142 Blue
Sub-base ACSB76156 White 200 1710 855 27.20
5
200 mm (8 in.) ACSB76157 Gray (7.87) (67.32) (33.66) (59.97)
ACSB76158 Black
ACSB76143 Blue
ACSB76159 White 200 2160 855 31.60
6
ACSB76160 Gray (7.87) (85.04) (33.66) (69.67)
ACSB76161 Black
ACSB76144 Blue
ACSB76162 White 200 2572 855 35.60
7
ACSB76163 Gray (7.87) (101.26) (33.66) (74.49)
ACSB76164 Black
ACSB76180 Blue
ACSB76181 White 500 1000 740 41.00
3
ACSB76182 Gray (19.69) (39.37) (29.13) (90.38)
ACSB76183 Black
ACSB76184 Blue
ACSB76185 White 500 1300 855 53.00
4
ACSB76186 Gray (19.69) (51.18) (33.66) (116.86)
ACSB76167 Black
ACSB76188 Blue
Sub-base
ACSB76189 White 500 1710 855 62.00
500 mm (20 in.) 5
ACSB76190 Gray (19.69) (67.32) (33.66) (136.69)
no grille
ACSB76191 Black
ACSB76192 Blue
ACSB76193 White 500 2160 855 77.00
6
ACSB76194 Gray (19.69) (85.04) (33.66 (169.76)
ACSB76195 Black
ACSB76196 Blue
ACSB76197 White 500 2572 855 90.00
7
ACSB76198 Gray (19.69) (101.26) (33.66) (198.42)
ACSB76199 Black
ACSB76145 Blue
ACSB76165 White 500 1000 740 38.00
3
ACSB76166 Gray (19.69) (39.37) (29.13) (183.78)
ACSB76167 Black
ACSB76146 Blue
ACSB76168 White 500 1300 855 50.00
4
ACSB76169 Gray (19.69) (51.18) (33.66) (110.20)
ACSB76170 Black
ACSB76147 Blue
Sub-base
ACSB76171 White 500 1710 855 59.00
500 mm (20 in.) 5
ACSB76172 Gray (19.69) (67.32) (33.66) (130.10)
front discharge
ACSB76173 Black
ACSB76148 Blue
ACSB76174 White 500 2160 855 74.00
6
ACSB76175 Gray (19.69) (85.04) (33.66 (163.10)
ACSB76176 Black
ACSB76149 Blue
ACSB76177 White 500 2572 855 87.00
7
ACSB76178 Gray (19.69) (101.26) (33.66) (191.80)
ACSB76179 Black
A A
A
C*
C*
B*
B*
A
na3713a
D**
E**
A A
A
na3940a
NOTE: Low ambient kit recommended if ambient temperature reaches below 0°F
DX models 0921
Voltage
Ambient Temperature
Type
(°F) 208–230 460 575
* These selections require a dual circuit air cooled condenser for a single refrigeration circuit indoor unit. These situations will require
manifolding (field installed/supplied) the discharge and liquid lines at the condenser to make one refrigeration circuit.
DX models 1121
Ambient Voltage
Type Temperature
208–230 460 575
(°F)
95 ACCD76055* ACCD76066* ACCD76077*
Air-Cooled
105 ACCD76055* ACCD76066* ACCD76077*
Condenser
115 ACCD76056* ACCD76067* ACCD76078*
95 ACFC75260 ACFC75268 ACFC75276
Fluid Cooler
105 ACFC75260 ACFC75268 ACFC75276
* These selections require a dual circuit air cooled condenser for a single refrigeration circuit indoor unit. These situations will require
manifolding (field installed/supplied) the discharge and liquid lines at the condenser to make one refrigeration circuit.
DX models 1622
Ambient Voltage
Type Temperature
208–230 460 575
(°F)
95 ACCD76057 ACCD76068 ACCD76079
Air-Cooled
105 ACCD76057 ACCD76068 ACCD76079
Condenser
115 ACCD76058 ACCD76069 ACCD76080
95 ACFC75261 ACFC75269 ACFC75277
Fluid Cooler
105 ACFC75261 ACFC75269 ACFC75277
DX models 1822
Ambient Voltage
Type Temperature
208–230 460 575
(°F)
95 ACCD76059 ACCD76070 ACCD76081
Air-Cooled
105 ACCD76059 ACCD76070 ACCD76081
Condenser
115 ACCD76059 ACCD76070 ACCD76081
95 ACFC75261 ACFC75269 ACFC75277
Fluid Cooler
105 ACFC75261 ACFC75269 ACFC75277
DX models 3342
Ambient Voltage
Type Temperature
208–230 460 575
(°F)
95 ACCD76060 ACCD76071 ACCD76082
Air-Cooled Condenser 105 ACCD76060 ACCD76071 ACCD76082
115 ACCD76060 ACCD76071 ACCD76082
95
Fluid Cooler N/A
105
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
CONTROL PANEL
BOX ASSEMBLY 39.16
37.00
LIFTING
BRACKET
54.50
46.76 SHIPPING BRACKET
14.00 25.00
32.00 37.43 41.00
18.00
7.28 28.00
35.18
4.91 32.75 9.11
na3926a
37.18
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
LIFTING BRACKET
30.10
28.00
SHIPPING BRACKET
90.50
82.76
25.00
14.00
20.31 41.00
32.00 37.43
18.00
na3927a
4.91 68.75 9.11 28.18
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
LIFTING BRACKET
39.10
37.00
94.50
86.76 SHIPPING BRACKET
14.00 25.00
20.31
32.00 37.43 41.00
18.00
7.28 68.00
35.18
na3928a
4.91 72.75 9.10 37.18
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
52.92
48.89 48.89
138.89
131.33
7.56
37.98 20.34
54.62 55.32 20.6
44.29
23.62
46.33 106.15
49.00 116.00
12.80
na3930a
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
LIFTING BRACKET
39.16
37.00
25.00
14.00
20.31 37.43 41.00
32.00
18.00
na3929a
4.91 104.75 9.11 37.18
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
UNIT SHIPPING BRACKET
INSTALLATION BRACKET
52.97
48.80
48.80
197.00
189.36
37.98
54.61 55.31
20.34 20.67
44.29
na3931a
7.49 53.07 111.08 48.92
174.00 12.79
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
ELECTRICAL BOX
313.00
305.44
37.98
20.34 20.67
55.31 54.61
44.29
23.62
na3997a
7.48 169.16 111.08 46.17
12.80 49.00
290.09
† All
dimensions shown in inches (in.).
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides and 2.4 m (8 ft) overhead
clearance for servicing.
52.97
48.89 48.80
ELECTRICAL BOX
371.06
363.50
20.34 37.98
20.67
55.31 54.61
44.29
23.62
7.51 111.13 116.07 111.07 46.17
na3996a
12.79 49.00
348.12
† All
dimensions shown in inches (in.).
160
140
3500 RPM
120
D
TOTAL FEET OF HEAD
100 C
80
B
60
40 A
20
0
0 50 100 150 200 250 300
GALLONS PER MINUTE
na4016a
NOTE: It is recommended to have 914 mm (36 in.) of clearance on all sides for servicing.
(48.00)
1219.20
914.40 (36.00)
(36.00) 914.40
Dimensions mm (in.)
Model Frame Size
A B
Downflow
TD*V0511* 3 900 (35.43) 653 (25.70)
TD*V0921* 4 1200 (47.24) 769 (30.28)
TD*V1121*
5 1610 (63.39) 769 (30.28)
TD*V1422*
TD*V1622* 6 2060 (81.10) 769 (30.28)
TD*V1822*
TD*V2242*
TD*V2542* 7 2492 (98.11) 775 (30.51)
TD*V2842*
TD*V3342*
Upflow Bottom Return
TU*V0511* 3 900 (35.43) 653 (25.70)
TU*V0921* 4 1200 (47.24) 769 (30.28)
TU*V1121*
5 1610 (63.39) 769 (30.28)
TU*V1422*
TU*V1622* 6 2060 (81.10) 769 (30.28)
TD*V1822*
TD*V2242*
7 2492 (98.11) 775 (30.51)
TD*V2542*
TD*V2842*
*First asterisk represents heat rejection method
*Second asterisk represents “D”, “G”, “L” in model number.
na3697a
FRONT OF UNIT RIGHT SIDE REAR OF UNIT LEFT SIDE
Ø48 (1.88) 16X Ø48 (1.88) 8X Ø48 (1.88) 16X
Ø63 (2.48) 2X
Ø36 (1.42) 2X Ø36 (1.42) 2X Ø36 (1.88) 2X
Ø48 (1.88) 4X Ø48 (1.88) 6X Ø48 (1.88) 4X
na3701a
FRONT VIEW OF UNIT RIGHT SIDE REAR VIEW OF UNIT LEFT SIDE
NOTE: For upflow installations where piping and wiring connections are not coming up from the bottom, a sub-
base is required to access piping and electrical connections.
† All dimensions shown in millimeters (inches).
† The 500 mm (20 in.) sub-base plenum with closed front has the same access.
Display
Reset 10/100
Micro
SD
Service
Port
USB
Console
na4820a
Item Description Function
When this LED is illuminated, a new entry has been made to the
Check Log LED
event log.
Open architecture
The Uniflair DX protocol is open for integration with all building management systems. Communication interface
on the system can be StruxureWare, MODBUS, LON FTT10, TREND, PCOWeb, or BACNET.
Control type
The event log keeps a record of all alarms and events. Each event log contains a time/date stamp as well as
operating conditions at the time of occurrence. The controller also displays run time, in hours, for major
components (air filters, fans, compressors, heaters, and humidifier).
The data log displays temperature and other data measurements from the cooling unit.
Control
The touch-screen LCD display interface provided on Uniflair DX units is protected by a configurable password
and provides access to information and settings for the unit.
• Fan Speed Setpoint
• High Humidity Alarm
• High Temperature Alarm
• Humidity Setpoint
• Low Humidity Alarm
• Low Temperature Alarm
• Dual Temperature Setpoint
• Set Date/Time
• Remote Unit Switch On/Off
• Compressor Sequencing
• Alarms
• Operating Time Scheduling
• Manual Control of Components
Terms of warranty
Schneider Electric warrants that the product shall be free from defects in materials and workmanship
for a period of one year from the date of product start-up when start-up is performed by Schneider
Electric authorized service personnel and occurs within six months of the Schneider Electric
shipment date. This warranty covers repairing or replacing any defective parts including on-site labor
and travel. In the event that the product fails to meet the foregoing warranty criteria, the warranty
covers repairing or replacing defective parts at the sole discretion of Schneider Electric for a period
of one year from the shipment date. For Schneider Electric cooling solutions, this warranty does not
cover circuit breaker resetting, loss of refrigerant, consumables, or preventive maintenance items.
Repair or replacement of a defective product or part thereof does not extend the original warranty
period. Any parts furnished under this warranty may be new or factory-remanufactured.
Non-transferable warranty
This warranty is extended to the first person, firm, association or corporation (herein referred to by
“You” or “Your”) for whom the Schneider Electric product specified herein has been purchased. This
warranty is not transferable or assignable without the prior written permission of Schneider Electric.
Assignment of warranties
Schneider Electric will assign you any warranties which are made by manufacturers and suppliers of
components of the Schneider Electric product and which are assignable. Any such warranties are
assigned “AS IS” and Schneider Electric makes no representation as to the effectiveness or extent of
such warranties, assumes no responsibility for any matters which may be warranted by such
manufacturers or suppliers and extends no coverage under this Warranty to such components.
Warranty claims
Customers with warranty claims issues may access the Schneider Electric customer support network
through the Support page of the Schneider Electric Web site, www.schneider-electric.com/ >
Support > Operations around the world. Select your country from the country selection pull-down
menu at the top of the Web page. Select the Support tab to obtain contact information for customer
support in your region.
For information on how to obtain local customer support, contact the representative or other distributors
from whom you purchased your product.
As standards, specifications, and designs change from time to time, please ask for confirmation of the information given in this publication.
© 2016 Schneider Electric. All Rights Reserved.
Uniflair and the Schneider Electric logo are trademarks owned by Schneider Electric Industries SAS S.A.S., or its affiliated companies. All other
trademarks are the property of their respective owners.
990-4483N-001 2/2016