Professional Documents
Culture Documents
26. According to IS codes, the maximum differential settlements should not exceed
___________ in the foundation on clayey soil.
a) 25 mm
b) 100 mm
c) 25 mm
d) 40 mm
27. The possible method adopted for designing of raft foundation is ___________
a) Conventional method
b) Elastic method
c) Soil line method
d) All of the mentioned
28. The conventional method for designing raft foundation is based on which of the
following assumptions?
a) Foundation is infinitely rigid and Soil pressure is assumed to be planar
b) Overburden pressure is assumed as zero
c) None of the mentioned
d) All of the mentioned
29. The actual reinforcement provided should be ___________ of that worked out
theoretically by conventional method.
a) Twice
b) Thrice
c) Lesser
d) None of the mentioned
30. The method that can be used for designing raft, based on elastic method?
a) Simplified elastic foundation and Truly elastic foundation
b) Conventional elastic foundation
c) None of the mentioned
d) All of the mentioned
Pokar Academy Foundation Engineering Part 2
32. Both conventional and flexible method can be used only in the case when
_________
a) Foundation is laid on cohesive soil
b) Soil pressure is low
c) Foundation is flexible
d) Load is concentrated on larger area
33. The modulus of subgrade reaction is applicable only when the load is applied
through _________
a) Plate of size 30 ×30 cm and Beam 30 cm wide on soil area
b) Plate size is 10 × 10 cm
c) None of the mentioned
d) All of the mentioned
34. The value of Ks(modulus of subgrade reaction) can be found out, based on the
effect of ___________
a) Size and Shape
b) Properties
c) None of the mentioned
d) All of the mentioned
36. In effect of shape method, the columns loads and bearing pressure distribution
are divided in to ___________ system of forces.
a) Two
b) Four
c) Three
d) Five
39. The art of driving piles into the ground was first established by __________
a) Greeks
b) Romans
c) Philippians
d) None of the mentioned
40. Based on the function, piles can be classified into ___________ types.
a) 4
b) 6
c) 8
d) 3
41. Which of the following piles is used to compact loose granular soil?
Pokar Academy Foundation Engineering Part 2
a) Friction piles
b) End bearing piles
c) Compaction piles
d) Tension piles
43. The piles that are used for protecting structures from ships and floating object
is ____________
a) Anchor piles
b) Fender piles
c) Compaction piles
d) Batter piles
45. The precast concrete piles are generally used for a maximum design load of
about ____________
a) 50 tonnes
b) 100 tonnes
c) 75 tonnes
d) 80 tonnes
b) Eight
c) Two
d) Four
49. Piles are commonly driven in to ground by means of special device called
__________
a) Pile driver and Hammer
b) Driller
c) None of the mentioned
d) All of the mentioned
50. The types of hammer used for driving piles are ___________
a) Drop hammer
b) Diesel hammer
c) Vibratory hammer
d) All of the mentioned