Professional Documents
Culture Documents
ZXA10 C300M (V3.0) ADSL Service Commissioning Configuration Guide
ZXA10 C300M (V3.0) ADSL Service Commissioning Configuration Guide
0) ADSL
Service Commissioning
Configuration Guide
ZXA10 C300M(V3.0) ADSL Service Commissioning Configuration Guide Internal Use O
nly▲
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following terms. If you do
not agree to the following terms, please notice that you are not allowed to use this document.
Copyright © 2014 ZTE CORPORATION. Any rights not expressly granted herein are reserved. This
document contains proprietary information of ZTE CORPORATION. Any reproduction, transfer,
distribution, use or disclosure of this document or any portion of this document, in any form by any
means, without the prior written consent of ZTE CORPORATION is prohibited.
and are registered trademarks of ZTE CORPORATION. ZTE’s company name, logo
and product names referenced herein are either trademarks or registered trademarks of ZTE
CORPORATION. Other product and company names mentioned herein may be trademarks or trade
names of their respective owners. Without the prior written consent of ZTE CORPORATION or the
third party owner thereof, anyone’s access to this document should not be construed as granting, by
implication, estopped or otherwise, any license or right to use any marks appearing in the document.
The design of this product complies with requirements of environmental protection and personal
security. This product shall be stored, used or discarded in accordance with product manual, relevant
contract or laws and regulations in relevant country (countries).
This document is provided “as is” and “as available”. Information contained in this document is subject
to continuous update without further notice due to improvement and update of ZTE CORPORATION’s
products and technologies.
ZTE CORPORATION
Address: NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
Website: http://dms.zte.com.cn(TSM-Technical Support)
Email: TSM.Aftersales@zte.com.cn
Revision History
Author
Prepared
Date Document Version Reviewed by Approved by
by
2012-10 R1.0 Yan Xiaohui Wang Jun
Proposal: Before reading this document, you had better have the following knowledge and skills.
SEQ Knowledge and skills Reference material
ZXA10 C300M(V3.0) Multi-Service Access
1 Equipment Commissioning
Equipment Configuration Manual
Follow-up document: After reading this document, you may need the following information
SEQ Reference material Information
ZTE Confidential Proprietary © 2014 ZTE CORPORATION. All rights reserved. III
ZXA10 C300M(V3.0) ADSL Service Commissioning Configuration Guide Internal Use O
nly▲
Summary
Chapter Description
1 Overview
2 Overall Description of Procedure
3 Description of Each Step
TABLE OF CONTENTS
1 Overview ......................................................................................................... 1
1.1 Usage Scale ..................................................................................................... 1
1.2 Objective .......................................................................................................... 1
1.3 Usage Method .................................................................................................. 1
FIGURES
TABLES
1 Overview
1.2 Objective
This SOP is applicable to the debugging personnel engaged in fixed network ZXA10
C300M products.
1. SOP explains what needs to be done in which sequence in order to achieve a goal.
2. Operation guide explains how to perform the operation procedure, that is, how to do
in detail.
Start
Creating VLAN
Error
Checking configuration
Correct
Saving data
Ending configuration
3. Port configuration planning: The port information of relevant rate and the VLAN
where the port is on should be opened.
Network Diagram
INTERNET
BRAS
Ethernet Switch
1/21/1
C300M
1/4/1 1/4/64
MODEM MODEM
PC PC
Data Specification
Personnel
Procedure
ZXAN(config-if)#pvc 1 enable
ZXAN(config-if)#
Personnel
Procedure
In config mode, use the command vlan x to create VLAN of ADSL service.
ZXAN(config)#vlan 200 //Create a single VLAN
ZXAN(config-vlan)#exit
ZXAN(config)#vlan database //Create VLAN in batch
ZXAN(vlan)#vlan 200-263
ZXAN(vlan)#
Personnel
Procedure
The uplink port mode should be consistent with the upper equipment port, if the upper
equipment port is tag mode, the uplink mode should be tag; if the upper equipment port is
untag mode, the uplink port mode should be untag.
Personnel
Procedure
Set ADSL line parameter set and alarm parameter set according to the customer’s
requirements. For alarm parameter set, accept the default configuration and modification
is not needed.
1. Execute adsl-profile test.prf for the first time to create a script named test.prf.
ZXAN(config)# adsl-profile test.prf
2. Execute adsl-profile test.prf for the second time to set the parameters of script.
ZXAN(config)# adsl-profile test.prf
AtucConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AtucConfRateChanRatio(0..100):[0]
AtucConfTargetSnrMgn(0..310(0.1dB)):[80]
AtucConfMaxSnrMgn(80..310(0.1dB)):[310]
AtucConfMinSnrMgn(0..80(0.1dB)):[0]
AtucConfDownshiftSnrMgn(0..310):[0]
AtucConfUpshiftSnrMgn(0..310):[0]
AtucConfMinUpshiftTime(0..16383):[0]
AtucConfMinDownshiftTime(0..16383):[0]
ConfProfileLineType(1-fast-only ,2-interleaved-only):[2]
AtucChanConfFastMaxTxRate(0..102400kbps):[1024]2048 (max downlink rate of fast channel)
AtucChanConfFastMinTxRate(0..512kbps):[0] (min downlink rate of fast channel)
AtucChanConfInterleaveMaxTxRate(0..102400kbps):[1024]2048 (max downlink rate of interle
ave channel)
AtucChanConfInterleaveMinTxRate(0..512kbps):[0] (min downlink rate of interleave channe
l)
AtucChanConfMaxInterleaveDelay(0..255ms):[16]
AturConfRateMode(1-fixed,2-adaptAtStartup,3-adaptAtRuntime):[2]
AturConfRateChanRatio(0..100):[0]
AturConfTargetSnrMgn(0..310(0.1dB)):[80]
AturConfMaxSnrMgn(80..310(0.1dB)):[310]
AturConfMinSnrMgn(0..80(0.1dB)):[0]
AturConfDownshiftSnrMgn(0..310(0.1dB)):[0]
AturConfUpshiftSnrMgn(0..310(0.1dB)):[0]
AturConfMinUpshiftTime(0..16383):[0]
AturConfMinDownshiftTime(0..16383):[0]
AturChanConfFastMaxTxRate(0..10240kbps):[512] (max uplink rate of fast channel)
AturChanConfFastMinTxRate(0..512kbps):[0] (min uplink rate of fast channel
AturChanConfInterleaveMaxTxRate(0..10240kbps):[512] (max uplink rate of interleave chan
nel)
AturChanConfInterleaveMinTxRate(0..512kbps):[0] (min uplink rate of interleave channel)
AturChanConfMaxInterleaveDelay(0..255ms):[16]
AtucDMTConfFreqBinsOperType(1-open,2-cancel):[2]
AturDMTConfFreqBinsOperType(1-open,2-cancel):[2]
LineDMTConfEOC(1-byte ,2-streaming ):[1]
LineDMTConfTrellis(1-on,2-off):[1]
AtucConfMaxBitsPerBin(0..15):[15]
AtucConfTxStartBin(6..511):[32]
AtucConfTxEndBin(32..511):[511]
AtucConfRxStartBin(6..63):[6]
AtucConfRxEndBin(6..63):[31]
AtucConfUseCustomBins(1-on,2-off):[2]
AtucConfDnBitSwap(1-on,2-off):[2]
AtucConfUpBitSwap(1-on,2-off):[2]
AtucConfREADSL2Enable(1-on,2-off):[2]
AtucConfPsdMaskType(1-DMT_PSD_MSK,2-ADSL2_PSD_MSK,3-ADSL2_READSL_WIDE_PSD_MSK,4-ADSL2_R
EADSL_NARROW_PSD_MSK):[2]
AtucConfPMMode(1-DISABLE,2-L2_ENABLE,3-L3_ENABLE,4-L3_ENABLE | L2_ENABLE):[1]
AtucConfPML0Time(0..255s):[240]
AtucConfPML2Time(0..255s):[120]
AtucConfPML2ATPR(0..31db):[3]
AtucConfPML2Rate(512..1024kbps):[512]
Press M or m key to modify, or the other key to complete?[C]
ZXAN(config)#
Generally, you just need to modify the following parameters related to downlink/uplink
rate in the script.
Personnel
Procedure
Personnel
Procedure
AtucChanConfIntlvMaxTxRt : 2048
AtucChanConfIntlvMinTxRt : 0
AtucChanConfMaxIntlvDelay : 16
AturConfRateMode : adaptAtStartup
AturConfRateChanRatio : 0
AturConfTargetSnrMgn : 80
AturConfMaxSnrMgn : 310
AturConfMinSnrMgn : 0
AturConfDownshiftSnrMgn : 0
AturConfUpshiftSnrMgn : 0
AturConfMinUpshiftTime : 0
AturConfMinDownshiftTime : 0
AturChanConfFastMaxTxRate : 512
AturChanConfFastMinTxRate : 0
AturChanConfIntlvMaxTxRt : 512
AturChanConfIntlvMinTxRt : 0
AturChanConfMaxIntlvDelay : 16
AtucDMTConfFreqBins : FF FF FF FF FF FF FF FF
AturDMTConfFreqBins : FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF
LineDMTConfEOC : byte
LineDMTConfTrellis : on
AtucConfMaxBitsPerBin : 15
AtucConfTxStartBin : 32
AtucConfTxEndBin : 511
AtucConfRxStartBin : 6
AtucConfRxEndBin : 60
AtucConfUseCustomBins : off
AtucConfDnBitSwap : off
AtucConfUpBitSwap : off
AtucConfREADSL2Enable : off
AtucConfPsdMaskType : ADSL2_PSD_MSK
AtucConfPMMode : DISABLE
AtucConfPML0Time : 240
AtucConfPML2Time : 120
AtucConfPML2ATPR : 3
AtucConfPML2Rate : 512
Adsl2ConfMinProtectionDs : halfSymbol
Adsl2ConfMinProtectionUs : halfSymbol
Check rate parameter configuration for the key:
AtucChanConfFastMaxTxRate
AtucChanConfIInterleaveMaxTxRate
AturChanConfFastMaxTxRate
AtucChanConfIInterleaveMaxTxRate
Personnel
Procedure
Save the current working data to the configuration file of enabling data by the command
write.
ZXAN(config)#ex
ZXAN#write
Building configuration...
....[OK]
ZXAN#