Professional Documents
Culture Documents
world faster
Contents
Blow fiber unit 03 | 08
EZ-Bend Optical Fiber 06
Blown cable 09
Drop cable 11
Blow Tube cable(outdoor) 13
Blow Tube cable(indoor) 16
Tube accessories 18
Installation Equipment 20
Blown Fiber Unit
Singlemode
1. Features
> EZ Blow Fiber units can be blown into EZ Blow micro tubes for out-door and in-door network including riser and small diameter bend route.
> Future proof and cost effective network by just-in-time fiber deployment.
> Flexible network design and easy customer connection by extremely flexible tube pathway.
> Quick repair and easy upgrade by simple blowing.
> Reduced splicing and connecting by long installation distance and various deployment options.
(Up to 6km installation without splicing or connecting is achievable)
3. Specifications
2 Fibers 4 Fibers 8 Fibers
Attenuations, dB/km ≤0.4 at1310nm ≤0.4 at1310nm ≤0.4 at1310nm
≤0.3 at1550nm ≤0.3 at1550nm ≤0.3 at1550nm
Dispersion, ps/nm.km ≤3.5 at1310nm ≤3.5 at1310nm ≤3.5 at1310nm
≤18 at1550nm ≤18 at1550nm ≤18 at1550nm
1. Features
3. Specifications
2 Fibers 4 Fibers 8 Fibers
Attenuations, dB/km ≤2.6 at 850nm ≤2.6 at 850nm ≤2.6 at 850nm
≤0.8 at1300nm ≤0.8 at1300nm ≤0.8 at1300nm
1. Features
3. Specifications
2 Fibers 4 Fibers 8 Fibers
Attenuations, dB/km ≤3.5 at 850nm ≤3.5 at 850nm ≤3.5 at 850nm
≤1.0 at1300nm ≤1.0 at1300nm ≤1.0 at1300nm
1. Features
3. Description
The design of low bending loss single mode fiber consists of a germanium doped core and a silica cladding. A dual
protective acrylate coating is applied over the fiber cladding to cushion the fiber against microbending losses, provide
abrasion resistance, and preserve the mechanical strength of the glass. Each fiber is proof tested so that it will survive
installation loads and associated long-term residual stresses, even under extreme environmental conditions . Finally,
each fiber is measured for optical and dimensional properties for compliance with all specifications listed in the
respective fiber data sheets.
4. Specifications
Characteristics Specified Values Tolerances Unit
Optical Properties
Attenuation 1310nm ≤0.34 dB/km
1550nm ≤0.20 dB/km
Attenuation Uniformity 1550nm 0.1 Max dB
Mode Field Diameter 1310nm 9.0 ± 0.5
1550nm 10.1 ± 0.8
Cutoff Wavelength Fiber 1330 Max nm
Cable 1260 Max nm
Chromatic Dispersion 1550nm 18 Max ps/(nm·km)
Zero Dispersion Wavelength 1302~1322 nm
Slope @ 0.091 Max ps/(nm2·km)
Macrobending Attenuation 100 turn, 50mm 1550nm 0.02 Max dB
100 turn, 50mm 1625nm 0.05 Max dB
1 turn, 32mm 1625nm 0.05 Max dB
PMD Link Design Value 0.05 Max ps/km
Individual fiber 0.1 Max ps/km
Geometrical Properties
Cladding Diameter 125 ± 1.0
Cladding Non-Circularity 1.0 Max %
Core/Cladding Concentricity Error 0.8 Max
Coating Diameter 245 ± 10
Coating Non-Circularity 6 Max %
Coating/Cladding Concentricity Error 10 Max
Mechanical Properties
Proof Test 1s 100 Min Kpsi
Fiber Curl 4 Min m
Coating Strip Force 30mm - 500mm/min 1.3 Min N
Dynamic Tensile Strength Unaged ≥550 Min Kpsi
(0.5meter gauge length) ≥750 Typical Kpsi
Aged ≥440 Min Kpsi
≥750 Typical Kpsi
Stress Corrosion Parameter ≥21 Min
unaged and aged ≥25 Typical
Environmental Tests
Temperature Cycling - 60°…/ +85°…, 1310 &1550nm 0.05 Max dB/km
Temperature Humidity Cycling -10°…/ +85°…, 1310 &1550nm 0.05 Max dB/km
Water Immersion 23°…, 1310 &1550nm 0.05 Max dB/km
Heat Aging 85°…, 1310 &1550nm 0.05 Max dB/km
1. Features
3. Specifications
2 Fibers 4 Fibers 8 Fibers
Attenuations, dB/km ≤0.4 at1310nm ≤0.4 at1310nm ≤0.4 at1310nm
≤0.3 at1550nm ≤0.3 at1550nm ≤0.3 at1550nm
Dispersion, ps/nm.km ≤3.5 at1310nm ≤3.5 at1310nm ≤3.5 at1310nm
≤18 at1550nm ≤18 at1550nm ≤18 at1550nm
Fiber Colors Blue, orange Blue, red Blue, orange, green, red
orangeGreen Violet, gray, yellow, brown
packaging Rosetted in the pan Rosetted in the pan Rosetted in the pan
Product code EPFU09SMF 9/125 X 2C EPFU09SMF 9/125 X 4C EPFU09SMF 9/125 X 8C
Supply length, m 1000, 2000, 4000, 6000 1000, 2000, 4000, 6000 1000, 2000, 4000
1. Stracture
1) Optical Fibers
2) Filling Compound
3) Loose Buffer Tube
4) Water Blocking Material
5) Central Strength Member
6) Ripcord
7) Outer Strength Member (if necessary)
8) Outer PE Jacket
> Maximum of 60 fibers (5-position design) and 72 > Color coded fibers for quick and easy identification
fibers (6-position design). during installation
> Optimized for air-blowing, microduct installation > Water blocking performance using swellable
> Small diameter and light weight with high fiber polymer technology
density > Stranded compact loose tube design enhances
> Stranded loose tube construction for easy, mid-span access flexibility and ease of handling
> Tested in accordance with IEC 60794-1-2 for reliable
performance
1. Stracture
1) Optical Fibers
2) Loose Buffer Tube
3) Filling Compound
4) Central Strength Member
5) Filling Compound
6) Wrapping Tape
7) Outer Strength Member
8) Ripcord
9) Outer PE Jacket
> Optimized for air-blown, microduct installation > Color coded fibers for quick and easy
> Small diameter and light weight with identification during installation
high fiber density > Stranded compact loose tube design
> Stranded loose tube construction for easy, enhances flexibility and ease of handling
mid-span access
> Tested in accordance with IEC 60794-1-2 for
reliable performance
1. Stracture
1) Messenger Wire
2) Outer Jacket
3) Non-metallic Strength Member
4) Fiber Unit
5) Outer PE Jacket
> Aerial self-supporting > Primarily for operation in the last portion of an
> All“Dry-core”design all-optical network, such as fiber to the home(FTTH)
> Fiber count up to 8 or fiber to the business(FTTB) networks
> Reduced form size; very small, lightweight cable > Typical drop cable distance 50m or less
> Installation on wooden or concrete poles
1. Stracture
1) Messenger Wire
2) Outer Jacket
3) Central Loose Tube
4) Colored Fiber
5) Non-metallic Strength Member
> Aerial self-supporting cable > Primarily for operation in the last portion of an all-
> Fiber count up to 6 optical network, such as fiber to the home (FTTH) or
> Extremely cost-effective solution for low-fiber count fiber to the business (FTTB) networks
> Reduced form size; small, lightweight cable > Typical drop cable distances 50m or less
> Installation on wooden or concrete poles
1. Features
3. Specifications
Specification
4.Product Code
4.Product Code
Direct Burial Reinforcement : Aluminum Layer + Aramid Yarn + Black MDPE + Black HDPE
Unit : mm
Part Number OD ID No. of Tubes Assembly OD Part Number OD ID No. of Tubes Assembly OD
1. Features
> The Best workability with Ez-Blow fiber units. Ez Blow fiber units can be blown into blown tube cables whenever needed.
> Indoor blown tube cables are used for riser, horizontal and distribution network of buildings and houses where flame
retardant property is needed.
> Compatible with all kinds of Ez Blow fiber units.
> Future proof and cost effective network by just-in-time fiber deployment.
> Flexible network design and easy customer connection by extremely flexible tube pathway.
> Reduced splicing and connecting by long installation distance and various deployment options. (Up to 6km installation without
splicing or connecting is achievable)
3. Specifications
Specification
4.Product Code
Unit : mm
Product Code OD ID No. of Tubes Assembly OD Product Number OD ID No. of Tubes Assembly OD
1. Features
2. Product Code
2. Product Code
Tube panel
1U in19” Rack BFPC-TP1U 1 - Used in rack system to clip
2U in19” Rack BFPC-TP2U 1 push-fit bulk head
1U Panel - Compatible with BFTC-BK5
Tube Cutter
3~12 mm BFPC-Cutter 1 - Gives clean cut face
- Tube size upto 12mm
1. Features
2. Product Code
Item Product Code Description
BFIE-FBH-01 Blowing Head and Controller
- Installation of blown fiber unit 2, 4, 8 core
- Tube size from 3 to 8 mm
- Operates from 110V ac or 24V dc.
- Remote controller is available
- Max. 10 bar working pressure.
BFIE-FDP-01 Dispenser
- Fixes blowing head during installation
- Includes pressure regulator and on-off valve
2. Product Code
Item Product Code Description
BFIE-FFK-01 Pneumatic Kit
- Air flow meter for measuring the air flow
- Air exhaust connector for stopping blown fiber
unit form escaping from the other end of the tube
- Connectors for connecting air hose
and blown tubes
BFIE-FCL-02 Coiler
- Winds the blown fiber unit into a fiber pan.
- Used for onward coiling for range extension
- Operates from 24V dc or 110V ac
- Includes coiling head, controller, and drive unit