Professional Documents
Culture Documents
Hardtop AX Comp A
Section 1. Identification
Product identifier : Hardtop AX Comp A
Product code : 16480
Product description : Paint.
Other means of : Not available.
identification
Product type : Liquid.
Approved
Specific hazards arising : Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
from the chemical In a fire or if heated, a pressure increase will occur and the container may burst, with
the risk of a subsequent explosion. This material is harmful to aquatic life with long
lasting effects. Fire water contaminated with this material must be contained and
prevented from being discharged to any waterway, sewer or drain.
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
sulfur oxides
metal oxide/oxides
Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training. Move containers from fire area if this can be done without risk.
Use water spray to keep fire-exposed containers cool.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways,
drains and sewers. Inform the relevant authorities if the product has caused
environmental pollution (sewers, waterways, soil or air). Water polluting material.
May be harmful to the environment if released in large quantities.
Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust
controls ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapor or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions
Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products
products should not be produced.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : Once sensitized, a severe allergic reaction may occur when subsequently exposed
to very low levels.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Bioaccumulative potential
Product/ingredient name LogPow BCF Potential
n-butyl acetate 2.3 - low
Solvent naphtha (petroleum), - 10 to 2500 high
light arom. (<0,1% Benzene)
2-methoxy-1-methylethyl 1.2 - low
acetate
2-Hydroxyethyl methacrylate 0.42 - low
Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)
Additional information
TDG Classification : Product classified as per the following sections of the Transportation of Dangerous
Goods Regulations: 2.18-2.19 (Class 3).
DOT Classification : This product is not regulated as a marine pollutant when transported on inland
waterways in sizes of ≤5 L or ≤5 kg or by road, rail, or inland air in non-bulk sizes,
provided the packagings meet the general provisions of §§ 173.24 and 173.24a.
Reportable quantity 27519.9 lbs / 12494 kg [2335.9 gal / 8842.2 L]. Package sizes
shipped in quantities less than the product reportable quantity are not subject to the
RQ (reportable quantity) transportation requirements.
ADR/RID : Tunnel restriction code: (D/E)
Hazard identification number: 30
ADR/RID: Viscous substance. Not restricted, ref. chapter 2.2.3.1.5 (applicable to
receptacles < 450 litre capacity).
IMDG : Emergency schedules (EmS): F-E, S-E
Marine pollutant: No.
IMDG: Viscous substance. Transport in accordance with paragraph 2.3.2.5
(applicable to receptacles < 450 litre capacity).
IATA : The environmentally hazardous substance mark may appear if required by other
transportation regulations.
Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
Inventory list
Australia : Not determined.
China : Not determined.
Europe : At least one component is not listed.
Japan : Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Malaysia : Not determined
New Zealand : Not determined.
Philippines : Not determined.
Republic of Korea : Not determined.
Taiwan : Not determined.
Turkey : Not determined.
United States : Not determined.
Users should always consult Jotun for specific guidance on the general suitability of this product for their
needs and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United
Kingdom) version will prevail.