Professional Documents
Culture Documents
Arcs
The procedure for drawing the isometric circle using the four
—center approximate method.
STEP 1
Draw the isometric square whose sides are equal to the
diameter of the circle.
A
DIAMETER
C B
Arcs
STEP 2
Connect the corners of the isometric square by constructing two
diagonal lines AD & CB.
C B
Arcs
STEP 3
Locate the midpoint of the sides and these points are the points of
tangency of the major and minor arcs.
C B
Arcs
STEP 4
Locate the centers of the major arcs.
The centers of the major arcs are the end points of the shorter diagonal
lines which are points A & D.
C B
Arcs
STEP 5
Locate the centers of minor arcs.
The centers of minor arcs can be located by connecting the
centers of the major arcs to the midpoint of their opposite sides, the
intersections of these lines are the centers of the minor arcs which
are points E & F.
C B
E F
Arcs
STEP 6
Draw the major and minor arcs using the located center points.
A
Pin of Compass
Pin of Pin of
Compass Compass
C B
E F
Pin of Compass
Assignment 4
Prepare 2 Sheets of 12 x 18
Sketch pad with the standard
title block layout
Isometric Arcs
Assignment: Scan all exercise output. Compile and layout and save to PDF format.
Record a short video while performing the task and save to MP4 format