Professional Documents
Culture Documents
Internet
2
3
1 Power off your modem.
2 Connect the INTERNET port on your Router to the Modem’s
LAN port with an Ethernet cable.
Ethernet Cable Resource CD USB flash disk
3 Connect your computer to one of the ports labeled 1~4 on
the Router with an Ethernet cable.
To use the Router to share files or printer, plug an external USB hard USB hard drive
drive/USB flash disk into the USB port, or connect a USB printer to the
* Some USB hard drives that work at a high
USB port. For specific configuration procedures of the USB Printer, power without using any external power
adapter might not be supported.
N600 Wireless Dual Band Gigabit Router
please refer to Appendix 1.
5 Plug the provided Power Adapter into the Power jack and
MODEL NO.
QIG the other end to a standard electrical wall socket. Press the
MODEL NO. TL-WDR3600
On/Off button to power on the Router.
2 Click START and the USB Printer Setup Wizard will 4 Click Finish on final screen to complete the
guide you step by step to set up the USB Printer. installation for TP-LINK USB Print Controller.
2 Select TL-WDR3600 and click Easy Setup Assistant. 4 Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
For more details about the Print server, please refer to Print Server Application Guide downloaded from our website: www.tp-link.com.
For more details about the configuration of USB Storage/FTP Server/Media Server functions for USB ports, please refer to User Guide in the resource CD.
7106503913
Appendix 2: Configure the Router via Web Management Page (for Mac OS X/Linux users or Windows users who can’t run the mini CD)
Open your web browser and type http://tplinklogin.net Select Auto-Detect to detect the Internet connection 5 Choose the frequency you want for your wireless network and 6
7 You can rename your 5GHz wireless network and create your
1 3
in the address bar. Then type admin both for user name type and click Next. then click Next. For the example we choose concurrently with own password in this page. The default wireless name is
and password to log in. 2.4GHz and 5GHz (802.11 a/b/g/n) below. TP-LINK_5GHz_XXXXXX, and the default wireless password,
the same as the PIN code, is printed on the bottom label. Click
Next to continue.
4 The Dynamic IP is the suitable connection type for most You can rename your 2.4GHz wireless network and create
cases. Here we take it as an example. On the next page, the 6
Click Quick Setup in the main menu and click Next. your own password in this page. The default wireless name is
2 cable modem users may need to clone the MAC address TP-LINK_2.4GHz_XXXXXX, and the default wireless password,
from their main computer - the computer which is used to the same as the PIN code, is printed on the bottom label. Click
connected with the cable modem. Then click Next. Next to continue.
Technical Support
For more troubleshooting help, go to
Troubleshooting http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to
http://www.tp-link.com/en/support/download
For all other technical support, please contact us by using the following details:
1. What can I do if I cannot access the Internet? 2. What can I do if I cannot open the web manage- 4. How do I restore my Router’s configuration Global
Tel: +86 755 26504400
Australia & New Zealand