Professional Documents
Culture Documents
Chapter 4-H
Chapter 4-H
ZONAL ISOLATION
Back
1. PLUG AND ABANDON KIT
2. SCAB LINER
ZONAL ISOLATION
Saudi Aramco utilizes zonal isolation kits to isolate unwanted zones in open holes.
These unwanted intervals (fractured or loss circulation zones) are isolated by setting
mechanical open hole packers at the top and bottom of the zone and using blank pipes
in between the packers.
Plug and Abandon Kit (P&A Kit) is used to isolate a fracture or a watered out zone
on bottom part of the open hole. The P&A Kit consist of: Setting Sleeve on top of
the assembly, 2 each of Mechanical Open packers, blank pipes and Bull plug at
the bottom part of assembly as shown below for 4½” P&A kill for 6-1/8” hole.
1 of 3
SAUDI ARAMCO WORKOVER MANUAL
Drilling Technical Department September 2013
___________________________________________________________________________________________________________________________
Scab Liner is Zonal Isolation Kit that will isolate the unwanted zone in the middle
part of the open hole. In this case, fracture zone or loss circulation zone is in the
middle of the formation. The Scab liner consist of : Setting Sleeve on top of the
assy, 4 ea of Mechanical Open packers, blank pipes and Wireline reentry guide at
the bottom part of assy as shown below for 4½” size for 6-1/8” hole.
2 of 3
SAUDI ARAMCO WORKOVER MANUAL
Drilling Technical Department September 2013
___________________________________________________________________________________________________________________________
3 of 3