Professional Documents
Culture Documents
1. General description
The Low IF Tuner HIgh performance One chips, TEF6686 and TEF6688, are single-chip
radio ICs including an AM/FM radio tuner and software-defined radio signal processing.
They extend NXP Semiconductors’ broad, industry-proven car radio single tuner portfolio,
offering outstanding radio performance with the widest range of features and state of the
art software algorithms at most optimized system costs.
Both devices are available in HVQFN packages occupying the smallest PCB space and
are suitable for dual- and multi-layer PCBs. The radio receiver includes highest feature
sets, the FM/AM front-ends, tuning synthesizer, channel filtering, FM Channel
Equalization, FM multipath improvement, demodulation, FM stereo decoding, weak signal
processing, noise blanking and RDS and provides an interface to a DARC
demodulator/decoder.
The TEF6686 and TEF6688 can provide stereo audio in digital format on the I²S outputs
and on the audio DAC outputs. The TEF6688 supports the digital radio standards HD
Radio and Digital Radio Mondiale (DRM) digital radio when used with NXP
Semiconductors’ digital radio coprocessors such as SAF356X and SAF360X.
3. Applications
The TEF668X is a single tuner AM/FM receiver for automotive applications and supports
analog AM/FM and HD/DRM reception (HD/DRM is supported in TEF6688 only).
Additionally, due to a common technology platform, the TEF668X can be combined with
TEF701X, SAF775X and SAF360X for optimal system application through common
crystal oscillator sharing.
TEF668X_SDS All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
5. Ordering information
Table 2. Ordering information
Type number Package
Name Description Version
TEF6686HN/V101 HVQFN32 plastic thermal enhanced very thin quad flat package; no leads; SOT617-3
TEF6688HN/V101 32 terminals; body 5 5 0.85 mm[1]
TEF668X_SDS All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
NXP Semiconductors
DCO DIGITAL XTAL
TUNING OSC
DIVIDERS SYSTEM
TEF668X
FM
FM FRONT-END
All information provided in this document is subject to legal disclaimers.
AM
AM FRONT-END
BPF
IC CONTROL
UNIT
SDA
POWER DIGITAL RADIO I2S INPUT I2S OUTPUT I2C
INTERFACE BUFFER BUFFER SCL
(1) TEF6688
(2) GPIO_1 and GPIO_2 are output only.
TEF668X
© NXP B.V. 2013. All rights reserved.
7. Limiting values
Table 3. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VDDA(RF)(3V3) RF analog supply voltage (3.3 V) on pin VDDA_RF 0.5 +3.9 V
VDDA(IF)(3V3) IF analog supply voltage (3.3 V) on pin VDDA_IFADC 0.5 +3.9 V
VDDD(3V3) digital supply voltage (3.3 V) on pin VDDD 0.5 +3.9 V
VDD(3V3-3V3) supply voltage difference between pins VDDA_IFADC and 0.3 +0.3 V
between two 3.3 V supplies VDDA_RF
Vn voltage on any other pin 0.5 +VDDD(3V3) + 0.3 V
Ilu latch-up current all supply voltages below the [1] 100 +100 mA
maximum value
Vlu latch-up voltage - 1.5 VDDD(3V3) V
Tstg storage temperature 55 +150 C
Tamb ambient temperature 40 +85 C
Tj junction temperature 40 +125 C
8. Revision history
Table 4. Revision history
Document ID Release date Data sheet status Change notice Supersedes
TEF668X_SDS v.1 20130730 Product short data sheet - -
TEF668X_SDS All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
9. Legal information
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
9.3 Disclaimers NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
Limited warranty and liability — Information in this document is believed to
third party customer(s). Customer is responsible for doing all necessary
be accurate and reliable. However, NXP Semiconductors does not give any
testing for the customer’s applications and products using NXP
representations or warranties, expressed or implied, as to the accuracy or
Semiconductors products in order to avoid a default of the applications and
completeness of such information and shall have no liability for the
the products or of the application or use by customer’s third party
consequences of use of such information. NXP Semiconductors takes no
customer(s). NXP does not accept any liability in this respect.
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors. Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
In no event shall NXP Semiconductors be liable for any indirect, incidental,
damage to the device. Limiting values are stress ratings only and (proper)
punitive, special or consequential damages (including - without limitation - lost
operation of the device at these or any other conditions above those given in
profits, lost savings, business interruption, costs related to the removal or
the Recommended operating conditions section (if present) or the
replacement of any products or rework charges) whether or not such
Characteristics sections of this document is not warranted. Constant or
damages are based on tort (including negligence), warranty, breach of
repeated exposure to limiting values will permanently and irreversibly affect
contract or any other legal theory.
the quality and reliability of the device.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards Terms and conditions of commercial sale — NXP Semiconductors
customer for the products described herein shall be limited in accordance products are sold subject to the general terms and conditions of commercial
with the Terms and conditions of commercial sale of NXP Semiconductors. sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
Right to make changes — NXP Semiconductors reserves the right to make agreement is concluded only the terms and conditions of the respective
changes to information published in this document, including without agreement shall apply. NXP Semiconductors hereby expressly objects to
limitation specifications and product descriptions, at any time and without applying the customer’s general terms and conditions with regard to the
notice. This document supersedes and replaces all information supplied prior purchase of NXP Semiconductors products by customer.
to the publication hereof.
TEF668X_SDS All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
TEF668X_SDS All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
11. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
5 Ordering information . . . . . . . . . . . . . . . . . . . . . 3
6 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6
9.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6
9.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9.4 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9.5 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
10 Contact information. . . . . . . . . . . . . . . . . . . . . . 7
11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.