Professional Documents
Culture Documents
Hammer Catalogue
Makita Gulf FZE P.O.Box 17133, Jebel Ali Free Zone, Dubai - UAE.
Tel. (971) 4 8860804 Fax. (971) 4 8860805 email: cs@makitagulf.ae
To place an order for this catalogue refer to this part no: (Z)000012
Pinted in U.A.E: “V.11.1”
Authorized Dealer :
Index
Make The Right Choice Page no
Anti Vibration Technology (AVT ) - what is AVT? 03
Rotary
40mm,Hammer 40mm, 45mm & 52mm
45mm,52mm 14
Accessories Page no
SDS-PLUS bits - Nemesis 17
SDS-PLUS bits 19-20
SDS-MAX Rotary Hammer Drill Bits 21
SDS-MAX bits - 4 cutter 22-25
Chisels 26
Self shrapening Chisels, , Cold Chisel, Grooving Chisel, Clay Spade, Chisel Adapter 26-31
Core bit adapter, TCT Core bit 32-34
Quick change drill chuck, Tool Holder, Drill chuck, Chuck adpter assembly, Chuck key 35
wrench, Grip / Grip assembly, Side handle assembly 36
Dust cap, Lock Nut Wrench, Oil Supply & Grease 37
Hammer service Kit 38
2
What is AVT
Makita has adapted the science of earthquake engineering into power tools with
Makita’s Anti Vibration Technology (AVT).
Makita's innovative AVT, Anti Vibration Principle of
Technology, uses the science of dynamic Dynamic Vibration Absorber
Hinge
3
Demolition Hammers
Rotary Hammers
BHR202Z 20mm 2.9kg 18V 3 1.9J - - - - - - - - - -
BHR261RD 26mm 4.5kg 36V 3 3.0J - - - - - - - - -
HR1830 18mm 1.9kg 440W 2 1.2J - - - - - - - - - -
HR2010 20mm 3.4kg 600W 1 1.7J - - - - - - - - - - -
HR2020 20mm 2.3kg 710W 2 2.2J - - - - - - - - - -
HR2432 24mm 3.2kg 780W 3 2.2J - - - - - - - - - -
HR2460 24mm 2.8kg 780W 2 2.7J - - - - - - - - - -
HR2470 24mm 2.9kg 780W 3 2.7J - - - - - - - - - -
HR2470T 24mm 3.0kg 780W 3 2.7J - - - - - - - - - -
HR2800 28mm 3.4kg 800W 2 2.9J - - - - - - - - - -
HR2810 28mm 3.4kg 800W 3 2.9J - - - - - - - - - - - -
HR3200C 32mm 4.8kg 850W 3 5.5J - - - - - - - - - - -
HR3210C 32mm 5.2kg 850W 3 5.5J - - - - - - - - - -
HR3530 35mm 5.3kg 1,010W 1 6.2J - - - - - - - - - - - - -
HR3540C 35mm 5.2kg 850W 3 6.3J - - - - - - - - - -
HR3541FC 35mm 5.6kg 850W 3 6.3J - - - - - - - -
HR4001C 40mm 6.3kg 1,100W 2 9.5J - - - - - - - - - -
HR4002 40mm 6.6kg 1,050W 2 5.8J - - - - - - - - - - - - -
HR4011C 40mm 6.7kg 1,100W 2 9.5J - - - - - - - - -
HR4030C 40mm 6.9kg 1,100W 1 9.2J - - - - - - - - - -
HR4501C 45mm 8.2kg 1,350W 2 13.0J - - - - - - - - - -
HR4511C 45mm 9.0kg 1,350W 2 13.0J - - - - - - - - -
HR5201C 52mm 11.3kg 1,500W 2 19.7J - - - - - - - - - -
HR5211C 52mm 12.2kg 1,500W 2 19.7J - - - - - - - - -
Chipping Hammers - - - - - - -
HK0500 - 3.2kg 550W - 2.8J - - - - - - - - - - - - -
HK1810 - 3.2kg 505W - 3.9J - - - - - - - - - - - - -
HK1820 - 3.4kg 550W - 3.9J - - - - - - - - - - - - -
HM0810T - 6.0kg 900W - 7.6J -- - - - - - - - - - - - - -
HM0860C - 5.2kg 1,100W - 12.0J - - - - - - - - - - -
HM0870C - 5.1kg 1,100W - 11.4J - - - - - - - - - - -
HM0871C -5.6kg 1,100W - 11.6J - - - - - - - - - -
Demolition Hammers
- - - - - - -
HM1101C - 8.0kg 1,300W - 17.2J - - - - - - - - - - -
HM1111C - 8.0kg 1,300W - 17.2J - - - - - - - - - -
HM1201 - 9.1kg 1,130W - 14.2J - - - - - - - - - - - - - - -
HM1203C - 9.7kg 1,510W - 26.0J - - - - - - - - - - - -
HM1213C - 10.8kg 1,510W - 26.0J - - - - - - - - - - -
HM1214C - 12.3kg 1,500W - 26.0J - - - - - - - - - - -
HM1304 - 15.5kg 1,500W - 27.5J - - - - - - - - - - - - - -
HM1306 - 15.1kg 1,510W - 28.8J - - - - - - - - - - - - - - -
HM1307C - 15.3kg 1,510W - 33.8J - - - - - - - - - - -
HM1317C - 17.0kg 1,510W - 33.8J - - - - - - - - - -
HM1801 - 29.7kg 2,000W - 63.0J - - - - - - - - - - - - - - -
HM1810 - 32.3kg 2,000W - 63.0J - - - - - - - - - - - - - -
4
5
Most compact machine in SDS Max series 850W / 5kg
9
10 5
7
JOULES 8
1
6.3J 4
(HR3541FC only)
Photo:HR3541FC
7 LED lamp
Hammering
with Rotation
Rotation
Rotation 3
MODE
Hammering LED lamp indicates
• Trouble with the electrical circuit.
• When to replace carbon brush.
6
Dominate the Job Site 1,100W / 5kg
with Makita’s Low Vibration
1,100W / 5 Kg
3
7
8
6 1
(HM0871C only) 4
5
2
4
(Soft No Load)
LED lamp indicates
• Trouble with the electrical circuit.
• When to replace carbon brush.
7
Dominate the Job Site
with Makita’s Low Vibration
1300W / 8Kg
NEW
HM1101C
HM1111C(AVT) 2
Demolition Hammers
1
5 7
6
3
(HM1111C only) 4
17.2
JOULES
8
Dominate the Job Site
with Makita’s Low Vibration
1,510W / 10 Kg
7 4
(HM1213C only)
5
2
26J
& Pic : HM1213C
4
(Soft No Load)
LED lamp indicates
• Trouble with the electrical circuit.
• When to replace carbon brush.
09
Comfortable Operation 1,500W / 12Kg
Excellent Demolition
HM1214C(AVT) NEW
1
Demolition Hammer 9
4
8
7
26 5
JOULES
2
6
&
1 Suppression of motor speed (Soft No Load) 4 LED lamp
• Reduces vibration of tool body when idling, LED lamp indicates
accordingly decreases the amount of vibration to • Trouble with the electrical circuit.
operator’s hands during a day’s operation. • When to replace carbon brush.
• Minimizes deflection of bit tip from aiming point
when starting chipping. 5 Electronic control features
• Variable speed control by dial
During no-load Under load
• Soft start for suppressing start-up reaction
Motor
speed • Constant speed control
Suppression of
motor speed 6 One-touch sliding chuck
One action slide chuck for rapid and easy
replacement of chisel.
10
High Durability 1,510W /15Kg
Excellent Demolition
HM1307C 1
HM1317C(AVT) 4
5
Demolition Hammers 6
7
8 2
JOULES
(HM1317C only)
&
1 Suppression of motor speed (Soft No Load) 5 LED lamp
• Reduces vibration of tool body when idling, LED lamp indicates
accordingly decreases the amount of vibration to • Trouble with the electrical circuit.
operator’s hands during a day’s operation. • When to replace carbon brush.
• Minimizes deflection of bit tip from aiming point
when starting chipping.
6
During no-load Under load
Motor
speed
Suppression of
motor speed
7 Strengthened aluminium barrel
4 Durable gears
11
Rotary Hammer Series
Cordless
Rotary Hammer BHR202Z Rotary Hammer BHR261RD
Capacity Concrete: 20mm (3/4”) Capacity Concrete: 26mm (1”)
Steel: 13mm (1/2”) Steel: 13mm (1/2”)
Wood: 26mm (1”) Wood: 32mm (1-1/4”)
3 mode Impacts per minute(ipm) 0-4,000 3 mode Impacts per minute(ipm) 0-4,800
No load speed(rpm) 0-1,100 No load speed(rpm) 0-1,200
1.9 Overall length 358mm (14-1/8”) 3 Overall length 363mm (14-1/4”)
JOULES JOULES
Net weight 3.5kg (6.4lbs) Net weight 4.5kg (9.9lbs)
Voltage 18V Voltage 36V
Adapted for SDS-PLUS shank Side Grip, Depth gauge (stopper pole). Adapted for SDS-PLUS shank
1pc of Battery and Charger, Side Grip, Depth gauge
(Tools does not comes with Battery, Charger & bit)
(stopper pole). (Tools does not comes bit)
ch
Qu i
uc k
12
Rotary Hammer Series
Rotary Hammers - 28mm
Rotary Hammer HR2800 28mm(8-1/8”) Rotary Hammer HR2810 28mm(8-1/8”)
Continuous rating Input 800W Continuous rating Input 800W
2 mode Capacity Concrete (with T.C.T. bit)
3 mode
Capacity Concrete (with T.C.T. bit)
: 28mm (1-1/8") : 28mm (1-1/8")
Concrete (with Diamond core bit) Concrete (with Diamond core bit)
: 80mm (3-1/8") : 80mm (3-1/8")
Steel : 13mm (1/2") Steel : 13mm (1/2")
Wood : 32mm (1-1/4") Wood : 32mm (1-1/4")
2.9 Impacts per minute (ipm) 0 - 4,500
2.9 Impacts per minute (ipm) 0 - 4,500
JOULES No load speed (rpm) 0 - 1,100 JOULES No load speed (rpm) 0 - 1,100
Overall length 314mm (12-3/8”) Overall length 314mm (12-3/8”)
Adapted for SDS-PLUS shank Net weight 3.4kg (7.4lbs) Adapted for SDS-PLUS shank Net weight 3.4kg (7.5lbs):HR2810
Depth Gauge, Grip (Tool does not come with bit). Depth Gauge, Grip (Tool does not come with bit).
13
Rotary Hammer Series
Rotary Hammer HR4011C 40mm(1-9/16”) Rotary Hammer HR4030C 40mm(1-9/16”)
Continuous rating Input 1,100W Continuous rating Input 1,100W
2 mode Capacity Concrete (with T.C.T. bit) Single mode Capacity Concrete (with T.C.T. bit)
: 40mm (1-9/16") : 40mm (1-9/16")
Concrete (with Core bit) Concrete (with Core bit)
: 105mm (4-1/8") : 118mm (4-5/8")
Impacts per minute (ipm) 1,350-2,750 Impacts per minute (ipm) 1,300 - 2,600
No load speed (rpm) 235-480 9.2 No load speed (rpm) 230 - 460
Overall Length 468mm (18-1/2”) JOULES Overall Length 413mm (16-1/4”)
9.5 Net weight 6.7kg (14.8lbs) Net weight 6.9kg (15.2lbs)
JOULES
Power supply cord 5.0m (16.4ft) Power supply cord 5.0m (16.4ft)
Adapted for SDS-MAX shank 17mm Hex shank
Depth Gauge, Grip Assembly, Greese Vessel Depth Gauge, Side Grip
(Tool does not come with bit). (Tool does not come with bit).
14
Power Scraper Series
Power Scrapers
Power Scraper HK0500 Power Scraper HK1810
Continuous rating Input 550W Continuous rating Input 505W
Impacts per minute (ipm) 2,000-3,500 Impacts per minute (ipm) 0 – 3,200
Overall length 468mm (18-7/8") Overall length 315 mm (12-3/8”)
Net weight 3.2kg (7.1lbs) Net weight 3.2 kg (7.1lbs)
Power supply cord 5.0m (16.4ft) Power supply cord 5.0 m (16.4 ft)
7.6
17mm Hex Shank 12 Adapted for SDS-MAX shank
JOULES
JOULES Bull Point, Hex Wrench, Grip. Bit Grease, Grip (Tool does not come with bull point)
11.4 11.6
JOULES
JOULES
Adapted for SDS-MAX shank Adapted for SDS-MAX shank
Grease for Bit, Side Handle Grease for Bit, Side Handle
(Tool does not come with bull point.) (Tool does not come with bull point.)
Demolition Hammers
Demolition Hammer HM1101C Demolition Hammer HM1111C
Continuous rating Input 1,300W Continuous rating Input 1,300W
Impacts per minute (ipm) 1,100-2,650 Impacts per minute (ipm) 1,100-2,650
Overall length 528mm (20-3/4") Overall length 528mm (20-3/4")
Net weight 8.0kg (17.7lbs) Net weight 8.0kg (17.7lbs)
Power supply cord 5.0m (16.4ft) Power supply cord 5.0m (16.4ft)
15
24
Demolition Hammer Series
Demolition Hammers
Demolition Hammer HM1201 Demolition Hammer HM1203C
Continuous rating Input 1,130W Continuous rating Input 1,510W
Impacts per minute (ipm) 2,000 Impacts per minute (ipm) 950 - 1,900
Overall length 480mm (18-7/8") Overall length 576mm (22-3/4”)
Net weight 9.1kg (20.2lbs) Net weight 9.7kg (21.4lbs)
Power supply cord 5.0m (16.4ft) Power supply cord 5.0m (16.4ft)
26
JOULES
Adapted for SDS-MAX shank
Adapted for SDS-MAX shank
Bull Point, Bit grease, Side handle.
26
JOULES Bull Point, Bit grease, Side handle.
Side Handle (Tool does not come with Bull Point). Side Handle (Tool does not come with Bull Point).
16
24
Drilling: Masonry, Concrete Adapted for
SDS-PLUS Rotary Hammers
New
Best in its class
- For more productivity and accuracy
SDS-PLUS Drill Bits
Optimum 4 x 90 degree
One Piece solid carbide symmetry, all 4 carbide Easy centering tip
4 cutter - head cutting head Four Flute Design facilitates spot drilling
< L2 >
<
D
>
< L1 >
• 2 cutter SDS plus drill bits suitable for masonry and concrete.
• The solid carbide tip with centering point and optimised flutes offers fast drilling speeds in a contractors, low cost option.
• TCT tip manufactured to DIN 8039 available from 4mm - 30mm diameter
18
Drilling: Masonry, Concrete Adapted for
SDS-PLUS Rotary Hammers
• Aggressive design, the fast and durable carbide tip allows easy centering and spot drilling.
• Designed for regular professional use, providing excellent performance in the toughest of materials.
Bit Dia(mm) Overall length (mm) Part No. Bit Dia(mm) Overall
Overall length
length (mm)
(mm) Part No.
19
• It will be discontinued once the current stock is over
Adapted for
Drilling: Masonry, Concrete SDS-PLUS Rotary Hammers
SDS-PLUS 5 bits assortment Standard range SDS-PLUS 5 bits assortment Mid range
5 different sizes 5 different sizes
Bit Dia(mm) Overall length (mm) Part No. Bit Dia(mm) Overall length (mm) Part No.
5 110 5 110
6 110 6 110
6 160 D-00795 6 160 P-29751
8 110 8 110
8 160 8 160
14pc Drill bit/Chisel Assortment Standard range 13pc Drill bit/Chisel Assortment Standard range
SDS-PLUS Drill bit and Chisel Assortment SDS-PLUS Drill bit and Chisel Assortment
14 pcs/set with aluminum case. 13 pcs/set with aluminum case.
20
Drilling: Masonry, Concrete Adapted for SDS-MAX
Hammers
38 370 D-34132
38 570 D-34148
40 370 D-34154
40 570 D-34160
21
9
Adapted for
Drilling: Masonry, Concrete SDS-MAX Hammers
12 340 P-17033
12 540 P-17049
12 690 P-17055
14 340 P-17077
For use in Concrete, Masonry and
14 540 P-17083
Natural stone 15 340 P-17108
15 540 P-17114
1. Dynamic drill bit head with unique cutting geometry
16 340 P-17120
The improved quality of the SDS head design is not only
reflected by improved life expectancy, but specifically through 16 540 P-17136
the faster drilling. 18 340 P-17158
• special primary cutting geometry 18 540 P-17164
• centring point for exact spot drilling
20 320 P-17186
• reduced friction and centralised alignment in drilled hole
• secondary cutters protect drill bit in the event of 20 520 P-17192
reinforcement collision 20 920 P-17201
• improved soldering process
22 320 P-17217
• shortened spiral windings and conical shaped dust tracks for
extra fast material removal into the high-volume double flute 22 520 P-17223
22 920 P-17239
The result: Greatest economic value, exact, perfectly 24 320 P-17245
dimensioned holes.
24 520 P-17251
2. Optimised spiral shape for maximum hammer force 25 320 P-17267
The high volume, double helix of the SDS-MAX is produced with 25 520 P-17273
the patented, high-performance, reinforced core 25 920 P-17289
KVS-flute.
28 370 P-17295
1 2 28 570 P-17304
28 670 P-17310
30 370 P-17326
30 570 P-17332
32 370 P-17348
32 570 P-17354
32 920 P-17360
The practical advantages: 35 370 P-17376
• maximum energy transfer 35 570 P-17382
• optimised vibration control
35 670 P-17398
• resistant to torsional forces
• reduced noise emissions 35 320 P-46040
• less stress for man and machine 38 370 P-17407
38 1320 P-17413
40 370 P-17429
40 570 P-17435
40 920 P-17441
40 1320 P-46056
45 570 P-40266
52 570 P-40272
22
17mm Hex Shank
Drilling: Masonry, Concrete
Hexognal Shank Standard range Hexognal Shank Premium range
23
Spline Shank
Drilling: Masonry, Concrete
Spline
SplineShank
Shank Standard range Spline Shank Premium Range
For Model Bit Dia(mm) Overall length (mm) Part No. For Model Bit Dia(mm) Overall length (mm) Part No.
16 380 • 791120-8
12 330 P-03311
18 380 • 791121-6
12 530 P-03327
19 525 • 791132-1
14 380 P-03333
22 555 • B-00387
15 330 P-03349
28 380 • 791126-6
16 380 P-03040
HR3850B
35 305 • B-00337
16 530 P-03056
35 380 • 791128-2
18 380 P-03062
35 525 • 791138-9
HR4040C
19 380 P-03078
38 380 • 791129-0
20 380 P-03109
38 555 • B-00446
HR5000
20 530 P-03115
40 380 • 791237-7
22 330 P-03137
40 525 • 791240-8
22 530 P-03143
44 380 • 791238-5
HR5000, HR4040C, HR3850B
24 330 P-03159
50 525 • 791235-1 24 530 P-03165
19 550 • 791039-1 25 380 P-03171
32 350 • 791042-2 25 530 P-03187
8050 Only 32 550 • 791043-0 28 380 P-03193
38 350 • 791044-8 28 530 P-03202
38 550 • 791045-6 28 680 P-03218
• It will discontinued once current stock is over 30 380 P-03224
30 530 P-03230
30 680 P-03121
32 380 P-03246
32 530 P-03252
35 380 P-03268
35 530 P-03274
35 680 P-03280
38 380 P-03296
38 530 P-03305
24
Drilling: Masonry, Concrete
Taper Shank Taper Shank Adapter
Allows the use of taper shank bits
Bit Overall length Part No. Shank Bit Type Part No.
For Model Dia(mm) (mm)
6.5 90 791152-5 For model: HR2510, HR2220
7.5 90 791153-3 Morse taper #1 798131-4
8 100 •791154-1 A-taper 798176-2
8.5 100 791155-9
For model: HR3520, HR3850
9.5 120 791156-7
Morse taper #1 • 798001-7
10 120 •A-21113
Morse taper #1 A-47597
10.5 120 791054-5
Morse taper #2 798002-5
10.5 160 •791215-7 A-taper • 798004-1
11 120 791017-1 B-taper • 798005-9
All Rotary 11.5 120 791055-3
For model: HR3520B, HR3850B
Hammers 12 120 •791018-9
Except Morse taper #1 • 798328-5
SDS-PLUS 12.5 120 791056-1
A-taper • 798135-6
SDS-MAX 13.3 120 791026-0
18 120 791016-3 For model: 8050
25
Drilling: Chisels
Chisels
The right chisel for every chiselling job
Advantages:
• Use of high-grade tempered steel
• Special processing and hardening process for optimal tool-life
• Minimized wear and tear
• Increased surface hardness and endurance range
Bull Point
For demolishing concrete.
Scaling Chisel
A wide chisel for chipping away scale of wide concrete spatter.
Cold Chisel
For chipping, edging, channeling and breaking away larger chunks of concrete.
Grooving Chisel
For Grooving, channeling, or removal of heavy scale.
Clay Spade
For digging in clay, scale etc.
Rammer
For tamping operations.
Bushing Tool
For concrete surface removal and to make it roush.
26
Drilling: Chisel, Points
New
Long Life
For Model: HM1302, HM1303, HM1304, HM1305, HM1306, HM1307C, HM1317C 400 B-10388
For Model: HM1800, HM1801, HM1810 400 B-10372
27
Drilling: Chisel, Points
Bull Point Scaling Chisel
• For demolishing concrete • Wide chisels for chipping away scale of concrete spatter
*• ItTile
will be discontinued once current stock is over.
Shank Length (mm) Standard Range Mid Range Shank W X L (mm) Standard Range Mid Range
400 D-19015 – For Model: HR3520, HR3850, HR4030C, HM0810, HM0810T, HM1130
17
For Model: HR3520B, HR3850B, HR5000 mm 50 x 280 D-20694 A-80606
300 D-20074 –
450 D-19196 – For Model: HM1201
21 –
For Model: HR3520, HR3850, HR4030C, HM0810, HM0810T, HM1130 mm 70 x 320 D-20672
210 D-16374 –
17
280 D-08682 A-80450 For Model: HM1302, HM1303, HM1304, HM1305, HM1306, HM1307C,
mm
HM1317C
450 – A-80547
30 D-23868 –
For Model: HM1201 mm 75 x 310
320 • D-16499 A-82747 For Model: HM1800, HM1801, HM1810
21 450
mm – A-80553 28.6
mm 75 x 520 D-20725 –
600 D-30994 –
For Model: HM1302, HM1303, HM1304, HM1305, HM1306, HM1307C,
Shank W X L (mm) Mid Range Premium Range
HM1317C
30 For Model: HK1800, HK1810
mm 410 D-15285 A-80466
30 x 150 •798265-3 B-07331
For Model: HM1800, HM1801, HM1810 50 x 150 – B-07347
Makita small
shank 20 x 220 –
28.6 B-07004
mm 410 D-17631 • 798381-1
50 x 220 •A-86016 B-07010
28
Drilling: Chisel, Points
Cold chisels Shank WxL Part no Part no. A-series
• For chipping, edging, channeling and breaking concrete chunks Adapted for SDS-MAX hammers
24 x 600 – P-16287
25 x 280 – A-80802
25 x 300 D-34207 –
25 x 400 D-34213 A-80818
25 x 600 D-34229 –
17
17 x 280 D-08707 A-80569
mm –
17 x 450 A-80575
For Model: HM1201
21 26 x 450 – A-80581
mm
17 • 798218-2 A-48561
mm 26 x 280
21
22 x 370 798275-0 –
mm
26 x 370 • 798274-2 –
For Model : HK1800, HK1810
140 • 798149-5 –
30
Drilling: Chisel, Points
Bushing Tool Shank A x B (mm) Part no Part no. A-series
67 x 67 798144-5 –
• For removing linoleum tile and other flooring Adapted for SDS-PLUS hammers
160mm
Chisel Adapter
Part no
For Model: HR2400D, HR160D 122547-5
31
Drilling: Core Bits
Core Bit
Economical and Flexible!
For use in Concrete, Masonry and Natural stone
Makita offers a comprehensive range of tools and accessories for heavy rotary hammer drills.
Ratio Quick core bit, together with pilot bits, flute bodies, shank extensions and adpaters make up the Ratio System a tool system which allows the
individual components to be used in various combinations.
Whatever the diameter and desired drill hole depth, using this system’s secure screw connections the individual components can be combined to meet
the demands of the job at hand. The precision manufactured Ratio special connectors ensure the tool is securely fixed when in use whilst also allowing
easy dismantling after use.
Please Note: Ratio Core Bits and accessories are not interchangeable Please Note: TCT Hallow Core Bits and accessories are not
with any other core bit system interchangeable with any other core bit system
25 280 • P-03925
216 • P-03707
For Model: HR3520, HR3520B, HR3850, HR3850B, HR4000C, HR4002, Chemical Anchor Adapter
HR4030C,HR4500C, HR4501C, HR4511C, HR5000, HR5001C, HR5201C
40 150 315 • 798151-8 For Model: HR3520, HR3530, HR3850, HR4030C
45 150 315 • 798046-5
Shank Square drive (mm) Part No.
65 150 315 • 798357-8
12.7 • A-44622
79 150 315 • 798048-1 17
mm 19 • A-44638
105 150 315 • 798049-9
105 150 315 • 798050-4 Ground Rod Adapter
[for driving electrical grounding tools]
80 550 • P-21967
Locking Keyless Drill Chucks For Models Spindle Thread Part No.
Makita’s unique chuck-lock system prevents the bit from 6301, 6013BR, 6300-4, 8416,
slipping or being overtightened. 8419B, 8419B2, 8420V,
Chuck snap out to unlock; in to lock. DP4700, HP2000, HP2010N, 3/8" - 24UNF 192282-9
HP2050N, HP2050/F, HP2070,
FREE NHP1300S, NHP1320S
6333DW - 192284-5
LOCK
34
Drilling: Chucks & Chuck Adapters
192284-5
Drill Chuck Adapter Assembly (For the slide chuck) Spindle Thread Part No.
For the swivel chuck (with screw M6 x 22) HR2010, HR2400, HR2410 122331-8
HR2510 • 321637-360
35
Drilling: Grip, Handle
Grip Grip Assembly
Drilling: Wrenches
Wrench
Used to remove crank cap after a grease leakage Bit diameter (mm) Part No.
6 - 14.5 421342-3
12 - 16 421664-1
Part No.
HR4500C 134915-0
HR4000C, HR4001C, HR4011C 134890-0
HR5000 134887-9
37
Drilling: Hammer Service Kits
For Model Part No. Part No. A: Use with Slide-Chuck System
B: Use with Swivel-Chuck System
HK0500 193397-5 –
HK1810 193394-1 For Model Type Part No. Part No.
–
HM0810T 193242-4 – HR1830 (127V) – 188388-9 –
HM0860C •183762-6 195204-8 HR2010 A 193395-9 –
HM0871C, HM0870C 195113-1 – HR2010 B 193396-7 –
HM1130 193405-2 – HR2020, HR2432, HR2440, •193606-2
– 195196-1
HR2450/F/T •188097-0
HM1201 193244-0 –
HR2400 (Red Chuck) A 193386-0 –
HM1202C, HM1202 193391-7 –
HR2400 (Black Chuck) B 193387-8 –
HM1203C, HM1213C, HM1214C 195114-9
HR2410, HR2420 B 193389-4 –
HM1303 193393-3 –
HM1304 •183614-1 195201-4 HR2410, HR2420, HR2430, A 193388-6 –
HR2431
HM1305 •183952-1 195203-0
HR2460, HR2470,HR2470T
HM1306 188449-5 – – •188414-4 195206-4
HR2800, HR2810
HM1307C, HM1317C 195103-4 –
HR2510 193404-4 –
HM1801 / HM1810 •188015-8 195205-6
HR3000C – 193390-9 –
HR3200C, HR3210C – 188501-9 –
HR3520 – 193280-6 –
HR3530, HR3540C, HR3541FC – 193283-0 –
HR3540C, HR3541FC, HR3850 193281-4 –
HR3850, HR3850B – 193281-4 –
38
Safety for Rotary Hammers and Breakers
Safety is a very important issue for these tools due to their power,
size and application.
1. Wear a hard hat, face guard, eyeglasses, hearing protection, dust mask, and padded gloves.
2. Be sure that the bit is secure, it could fly out and cause harm or damage.
3. Check the tightness of all parts before use.
4. Always have a firm footing and a firm grasp on the tool.
5. Do not point the tool at anyone during operation.
6. Do not touch the bit directly after use; it could burn you.
7. Do not operate the tool with persons below you.
8. Use the right bit for the right job
9. Keep bits sharp
8 Point Procedure
(Remember to always have the power disconnected when not operating the tool.)
1. Always read the safety and instruction manuals before operating the tool.
2. Inspect the tool. Make sure all parts are attached and are tightened.
3. Secure the work piece.
4. Make necessary markings on the work piece.
5. Make necessary adjustments to the tool.
6. Put on safety glasses.
7. If you need to raise your voice to be heard while using the tool, wear ear protection.
8. Take appropriate position to operate tool.
The Makita Operation Manual that accompanies each tool also provides safety
recommendations specific to each tool.
39
Rotary & Demolition
Hammer Catalogue
Makita Gulf FZE P.O.Box 17133, Jebel Ali Free Zone, Dubai - UAE.
Tel. (971) 4 8860804 Fax. (971) 4 8860805 email: cs@makitagulf.ae
To place an order for this catalogue refer to this part no: (Z)000012
Pinted in U.A.E: “V.11.1”
Authorized Dealer :