Professional Documents
Culture Documents
Department of Education
Region III
Test II Directions: Fill in the blanks with the correct word/s to complete the statements. Choose the
answer in the box below.
_____ 1. A tool used for measuring angles it has a protractor attached on the tool.
a. steel rule b. steel tape c. combination square d. divider
_____ 2. A tool used to measures the distance of a metal.
a. steel rule b. steel tape c. combination square d. divider
_____ 3. How many inches long is the steel rule?
a. 12 b. 16 c. 24 d. 7212
_____ 4. What is the range size of steel tape in feet?
a. 72-100 b. 25-100 c. 27-100 d. 52-100
_____ 5. What is the size of a pull push rule in inches?
a. 12 b. 16 c. 24 d. 72
_____ 6. It is used to measure the dimensions in thousandths of an inch
a. Divider b. Micrometer caliper c. Vernier caliper d. Try-square
_____ 7. It is used to measure the square of an object.
a. Divider b. Micrometer caliper c. Vernier caliper d. Try-square
_____ 8. It is a tool used to measures the inside and outside diameter or the slot of a metal.
a. Divider b. Micrometer caliper c. Vernier caliper d. Try-square
_____ 9. Which of the following is not included in the measuring tools?
a. steel rule b. pull push rule c. steel tape d. steel blade
_____10. This tool is the most commonly used in the tool room.
a. steel rule b. pull push rule c. try square d. steel tape
Test II - Directions: Read the following given tools below, write MT if the given tools belong to
SMAW measuring tool and NMT if not. Write the answer on your answer sheet. (1-10)
1. Tape measure –_________ 6. compass -________________
2. Steel rule - _____________ 7. divider -__________________
3. Weighing scale -_________ 8. Micrometer caliper - ________
4. Pull-push rule - __________ 9. Vernier caliper -____________
5. Combination square - _____ 10. Steel tape _______________
TEST I - Fill Me, To COMPLETE Me Directions: Supply the missing number and the type of operation
use to complete the measurements below. Write the answer on your answer sheet.
TEST II – TRUE OR FALSE Directions: Write T if the statement is true and F if it is false. Write your
answer on your answer sheet.
_____1. Addition is one the simplest numerical tasks that everyone can do.
_____4. Subtraction is the process of taking away one number from another number.
_____7. Reindeer is the term used when the quotient left is not a whole number.
Multiple Choice:
Directions: Identify what is asked in each of the following statements. Choose and write the letter that
corresponds to your answer. Use your answer sheets
ANSWER KEY
TEST I
1.D
2.C
3.B
4.D
5.A
6.D
7.A
8.A
9.B
10.D
TEST II
1.HAMMER
2. PLIERS
3. BOLTS
4.BRONZE
5.HOLES
6.BENCH
7.PERMANENT
8.PIPES
9.NUT
10. FIXED
Republic of the Philippines
Department of Education
Region III
ANSWER KEY
1. C
2. D
3. A
4. B
5. D
6. B
7. D
8. C
9. D
10.A
TEST II
1. NMT
2. MT
3. NMT
4. MT
5. MT
6.NMT
7.MT
8.MT
9. MT
10. MT
Republic of the Philippines
Department of Education
Region III
ANSWER KEY
1. +
2.100
3. 10,076
4. 70
5. 10
6. X
7. 1
8. 1009
9. 8,888
10.0
TEST II
1. T
2. F
3. T
4. T
5. F
6.T
7. F
8. T
9. T
10. F
Republic of the Philippines
Department of Education
Region III
ANSWER KEY
1. B
2.D
3. D
4. B
5. C
6. D
7. B
8. A
9. A
10. C
11. D
12.D
13.A
14. B
15. C
TEST II
1. DANGER
2. DANGER
3. DANGER
4. SAFETY
5. DANGER