Professional Documents
Culture Documents
Description
Technical Properties:
Flo-Add C is a pre-packed powder consis ng of selected
admixtures and expansive material. The addi on of Flo- Colour: Grey
Add C to grout mixes produces a high flow, non-shrink,
and non-segregated grout. Flo-Add C reduces the water Compressive strength: ≥ 20 MPa @ 1 day
demand at the desired flow, producing high strength ASTM C109/109M-11 ≥ 50 MPa @ 7 days
grout with low permeability and excellent bond to steel. ≥ 60 MPa @ 28 days
The low permeability grout produced with the aid of Flo-
Add C will reduce the ingress of harmful agents and will Expansion
protect the cables from corrosion. characteris cs: Up to 4%
ASTM C827/C827M-10
Applications
Fresh wet density: 2.1 ± 0.1 g/cm
Flo-Add C is ideally designed for free flow grou ng in post
tensioned cables used in bridges, deck ducts, etc. It is also Flow characteris cs: < 32 sec
suitable for use in cable ducts and pre-stressed structural ASTM C939-87 within 30 min from mixing. Re-
elements. mixing may be needed to keep the needed flow
Only exposed areas should be properly cured with water. A wide range of construc on chemical products are
manufactured by DCP which include:
Cleaning
Concrete admixtures.
All tools should be cleaned immediately a er applica on Surface treatments
using fresh water. Hardened materials should be cleaned Grouts and anchors.
mechanically. Concrete repair.
Flooring systems.
Packaging Protec ve coa ngs.
Sealants.
Flo-Add C is available in 6 kg bags. Waterproofing.
Adhesives.
Yield Tile adhesives and grouts.
Building products.
Approximately 68 litre of mixed grout is obtained when Structural strengthening.
mixing 6 kg Flo-Add C, 100 kg cement and 34 litre water.
Storage
Cautions
Fire
Flo-Add C is nonflammable.
03-0002-A-2019