Professional Documents
Culture Documents
Figure39 Adding people on interior elevation drawings gives a relative sense of object heights
Check list for interior elevation drawings. Please use these as a guide where applicable.
Notation
1. Draw cross-reference symbols such as section or detail symbols (Figure 40).
2. Label room names.
3. Label major elements including fireplace, furniture, and shelves.
4. Call out appliances and equipment including refrigerator, dishwasher, clothes washer, dryer, microwave oven, and other similar
items.
5. Call out small items such as medicine cabinet, grab bars, towel dispensers, mirrors, base board, molding, and chair rail.
6. Show proper symbolic representation for each material.
7. Call out finish materials.
SCHEDULED LIGHTING FIXUR
ETCHED GLASS
Dimension
A. Interior Elevation
1. Dimension heights of vertical elements including cabinetry, countertop, soffit, molding, wall panel, railing, grab bar, etc.
2. Dimension heights of doors, windows, and wall openings from the finished floor lines to the tops of these objects.
3. Dimension from finished floor lines to finished ceiling lines.
4. Remember that interior elevations are mainly intended to show vertical heights of walls and other components related to them
including doors, windows, millwork, and other important elements. Horizontal dimensions on interior elevations are to show
additional information on spaces and elements that are not shown on the floor plan. Some professionals may prefer to place all