You are on page 1of 2

5/22/14 Gateway Energy Meters wasion group

中文 | English | Stock code:HK3393

Online contact Relevant Link

Home About Wasion Products Quality Assurance Knowledge Careers Investor Relations Enter keywords

Position:Home > Products > Smart Energy Metering > Three Phase Energy Meters > Gateway Energy Meters

DSSD331/DTSD341-MB3 Three Phase


Products for Overseas Multifunction Gateway Meter
Market
Smart Energy Metering Overview

> Single Phase Energy Meters Designed for power plants, substations and enterprises & public
institutions demanding electric energy metering of high reliability.
> Three Phase Energy Meters

> Installation-type Energy

Meter
> Series of Digital Calibration

Devices
> Smart Energy Management

Terminal
> SmartUnits
Distribution

Automation Equipment
> Power Quality Equipment

Smart Water Measurement


Characteristic Function Parameters Detail
and Management
Smart Gas Measurement

and Management
Smart Heat Measurement Characteristic

and Management The meter is a new generate of multifunction Energy Meter based on the classic multifunction Energy Meter
Smart Energy Efficiency
WASION GROUP, with stable performance, abundant functions and strong anti-interference, as well as
meticulous designs in operation convenience and data security. The meter adopts hermetic construction and
Management
Solutions
enclosure, suitable for the application under harsh conditions as alternating high and low temperature and
hygrothermal environment. Lead sealing may be applied to the battery holder and programming buttons to
facilitate the management by power supply authority.

Function

Large size and wide-angle LCD display, provided with rich status indicators and prompting symbol in Chinese
characters, with backlight.
Dual of RS-485, attachable or far infrared communication interface, with respectively independent channels.
Equipped with active and reactive idle contacts electric energy impulse and LED electric energy impulse
outputs.
Time-of-use metering on forward and reverse active electric quantity, four-quadrant reactive electric quantity,
combination 1 and combination 2 reactive electric quantity; combination mode: arbitrary combination for four-
quadrant; the metering will be divided into forward and reverse active electric quantity and inductance-
capacitance reactive electric quantity.
Time-of-use metering on forward and reverse active and reactive maximum demand quantity and time of
occurrence.
Maximum 8 tariffs, primary and secondary time frames, dual-backup clock, automatic error correction, and
maximum 13 months history logging.
Provided with settings for 6 types of data logging load curves, with a capacity up to 4MB.
Loggings for voltage loss, full voltage loss, current loss, full current loss, voltage qualified rate, reset, demand
reset, programming, timing, power on, over voltage, inverse phase sequence, cover opening and other events.
Dual-backup data storage, provided with self-inspection and error correction functions, and fault alarm
functions as internal card error, clock error, voltage inverse phase sequence, voltage loss, over voltage,
current loss and battery under voltage.
Capable of wake-up display through buttons and manual meter reading device after blackout, and far infrared
meter reading.
Provided with cover opening detection function for electricity larceny prevention.

Parameters

Item of technical parameters Item Content


GB/T17215.321-2008;GB/T17215.322-
Technical standards 2008;GB/T17215.323-2008;DL/T614-
2007
Active: Class 0.2S and 0.5S; Reactive:
Accuracy Class
Class 2.
Reference voltage 3×100V;3×57.7/100V;3×220/380V

www.wasion.com/EN/pro/524.html 1/2
5/22/14 Gateway Energy Meters wasion group

Current Spec. Mutual CT switch in::0.3(1.2)A;1(2)


A;1.5(6)A ;3(6)A;5(6)A;
Communication protocol DL/T645-1997
Overall power consumption <1.5W ,6VA
Reference frequency (50±2.5)Hz
0.8Un~1.2 Un;Ultimate operating voltage
Operating voltage range
range:0.7 Un ~1.3 Un;
Operating temperature -25℃~+55℃;
Ultimate operating temperature 35℃~+65℃
Clock tolerance ≤0.5s/d, with temperature compensation;
Overall dimensions L × W ×H: 220mm×170mm×75mm
Net weight About 1.6KG

Next: DSSD331/DTSD341-9Z Three Phase Impact Load Resistance Special Energy Meter
back print
Prev: DSSD331/DTSD341-MA2 Three Phase High Accuracy

RSS/XML Site map | Download center | Contact us | Privacy policy | Disclaimer Copyrigt©2009 wasion group all rights reserved

www.wasion.com/EN/pro/524.html 2/2

You might also like