Professional Documents
Culture Documents
SPECIAL-PURPOSE HD MOLY
APPLICATIONS PHYSICAL PROPERTIES
• a premium high-quality grease • slate-gray color
• 5° to 275°F (-15° to 135°C) • lithium complex thickened
• for use with pins and bushings, ball joints • contains 3% molybdenum disulfide (MoS2)
• for use where shock load and sliding
TEST ANALYSIS
contact are continuous
Penetration @ 77°F, 60 strokes………... 265–295 mm/10
• for chain, cable, and conveyor lubrication
Dropping point, °F……………………… 500°F
• for applications where pitting, scoring, and wear
Timken OK load, minimum…………... 60 lbs.
failures are a problem
Water washout @ 175°F, loss………….. 5%
• for high-temperature and extreme-pressure
Oxidation pressure drop
conditions
@ 100 hours, maximum……………... 7 psi
• compatible with lithium, aluminum, and
calcium greases SIZE / PART NO.
U.S. Canada
14-oz. cartridge………………………………… TY6333…….CXTY6333
35-lb. can………………………………………...TY22017….. CXTY22017
SERVICE RATINGS 120-lb. keg……………………………………….TY24502….. CXTY24502
MULTI-PURPOSE LITHIUM
APPLICATIONS PHYSICAL PROPERTIES
• ideal for all-season general-purpose lubrication • rust brown
applications • lithium thickened with high-density polyethylene
• 5° to 250°F (-15° to 121°C)
• for light- to medium-duty wheel bearings and TEST ANALYSIS
U-joints Penetration @ 77°F, 60 strokes………... 265–295 mm/10
• excellent performance in light-duty applications Dropping point, °F……………………… 360°F
• a good multi-purpose grease
SIZE / PART NO.
SERVICE RATINGS U.S. Canada
14-oz. cartridge………………………………….PT507……...CXPT507
JDM J13C3A 35-lb. can…………………………………………PT575……...CXPT575
NLGI grade 2
MULTI-PURPOSE SD POLYUREA
APPLICATIONS PHYSICAL PROPERTIES
• ideal in rolling-contact applications • green color (emerald)
• -30° to 350°F (-34° to 177°C) • polyurea thickened
• for high-temperature, extreme-pressure conditions • paraffinic-base oil with EP and anti-rust additives
• used for initial lubrication at the factory in
TEST ANALYSIS
U-joints and axle bearings
Penetration @ 77°F, 60 strokes………... 275–295 mm/10
• for excellent protection in corrosive and wet conditions
Dropping point, °F……………………… 500°F
• compatible with most other types of grease
Timken OK load, minimum…………... 45 lbs.
• excellent for all-purpose applications especially
Water washout @ 175°F, loss………….. 2%
those requiring a severe-duty grease
Oxidation pressure drop
• our best multi-purpose grease
@ 100 hours, maximum……………... 10 psi
SERVICE RATINGS SIZE / PART NO.
Equipment manufacturers' extended service intervals U.S. Canada
NLGI grade 2 3-oz. cartridge…………………………………...TY24419…..CXTY24419
JDM J13E4 14-oz. cartridge………………………………….TY6341…… CXTY6341
4-lb. tub…………………………………………..TY24420…..CXTY24420
35-lb. pail……………………………………….. TY24421…..CXTY24421
120-lb. keg………………………………………. TY24422…..CXTY24422
John Deere grease products have been specially designed and formu-
lated to meet all John Deere equipment needs. In the multi-purpose
line, PT507 is a proven performer for moderate applications, TY24416
is a lithium complex which withstands water and high temperatures,
and TY6341 is excellent for high loads and temperatures and is the
most cost effective. For special-purpose needs, TY24425 has been field-
tested to cling to parts, especially in extreme-water conditions; TY6333
was designed for extreme-pressure applications, such as metal-on-metal
contact areas; and AN102562 is a long-lasting, thin grade formulated for
corn head and other gear cases to help reduce leakage and for difficult-
to-service or infrequently serviced units.