Professional Documents
Culture Documents
MEASUREMENT OF
EXTERNAL WORKS
LECTURE 5
WATER RETICULATION
WATER RETICULATION
SMM2 Section
▪ Section D : Excavation
▪ Section F : Concrete Work
▪ Section Q : Plumbing And Mechanical Engineering
Installation
▪ Section U : Painting
▪ Section V : Drainage
SMM2 – Water Reticulation (Valve)
D.11 – Starting Level
Excavate Pits - m3 The starting level shall be the "ground level",
"reduced level”, “formation level” or other such
SECTION D – Excavation and Earthwork
levels from which excavation shall commence and
Generally the appropriate level shall be so stated and
Excavation described.
Quantities for excavating and sub sequent disposal D.12.6 - Pits to receive bases of stanchions, colums,
shall be in bulk before excavating and no allowance isolated piers and the like (grouped together) (nr)
for subsequent variation to bulk or extra space Excavating pits having both plan dimensions less
required to accommodate earthwork support, than 1.25m shall be given separately.
formwork for concrete and working space.
D.10 – Depth Classification
DISPOSAL OF EXCAVATED MATERIALS
Maximum depth not exceeding 0.25m
Remove (disposal excavated material) – m3
Ditto, 1.00m
D.19 - Disposal off Site
Ditto, 2.00m
Disposal excavated material measured in M3.
Ditto, 4.00m
The provision of a shoot, dump or tip including
And there after in 2.00m stages payment for royalties, fees, levies and other
charges shall be deemed to be included with the
items unless otherwise stated
SECTION F – Concrete Work
Precast Concrete Valvr Chamber –No
F.18 Copings, kerbs, lintels, etc.
SECTION F – Concrete Work 1. Standard or stock pattern
F.17 – Generally 1 copings
Precast units including floors shall be given under an 2 Kerbs
appropriate heading and shall unless otherwise required be 3 Channels
enumerated – No 4 Lintels
3 3 Pipe at Blk D
WATER RETICULATION
(PIPE AT BLOCK D)
The following in 1 No. Pipe (Externally)
(Cont’d)
Extra over for 150mm x 150mm x 150mm
diameter flanged ended tees with flanged
joints
3 3 Pipe at Blk D
WATER RETICULATION
(PIPE AT BLOCK D)
The following in 1 No. Pipe (Externally)
(Cont’d)
Extra over for 150mm diameter flanged
ended end caps with flanged joints
3 3 90 degree bends
WATER RETICULATION
- VALVES
The following in 1 No. Pipe (Externally)
(Cont’d)
3 3 Tees
WATER RETICULATION
- VALVES
The following in 1 No. Pipe (Externally)
(Cont’d)
2 2 End caps
1 1 sluice valve
at blk D
WATER RETICULATION
- VALVES
The following in Marker posts and lettering
1 1 sluice valve
at blk D
WATER RETICULATION
- VALVES
WATER RETICULATION
- VALVES
The following in Marker posts and lettering
(cont’d from previous slide)
1 1 sluice valve
at blk D
WATER RETICULATION
- VALVES
The following in 1 No. valve chamber
Excavate pits for isolated valve chamber and
the like having plan dimension less than
1.25m; commencing from reduce levels
including earthwork support, levelling,
grading and compacting bottom, trimming
sides of excavation and formation of slope;
maximum depth not exceeding 1.00m
0.70 Depth of exca size
0.63 125 600 525
0.50 0.22 sluice valve 225-40 185 2/50 100 100
at blk D 190 700 625
500
WATER RETICULATION
- VALVES
The following in 1 No. valve chamber
(Cont’d)
1 1 Air valve
at blk D
WATER RETICULATION
WATER RETICULATION
WATER RETICULATION
WATER RETICULATION
WATER RETICULATION
WATER RETICULATION
The following in 1no. Of Pillar hydrants
The following in 1 No. valve Pillar hydrant to B.S. 750, mounted on and including
450mm x450mm x 150mm thick plain in-situ concrete
Sluice valves to B.S. 5163 including concrete Grade 20 base, 2 nos. outlet caps, galvanised mild steel
support, flanged adaptor, extension spindle in fastening chains, all necessary joints and fittings, one
Polyvinyl Chloride (PVC) casing, all necessary coat of red oxide primer, one undercoat and two finishing
joints and fittings, one coat of red oxide primer, coats of gloss enamel paint on general surfaces of metal
one undercoat and two finishing coats of gloss works;
enamel paint on general surfaces of metalwork, 100mm diameter painted double outlet pillar hydrant;
150mm diameter double flanged sluice valves, complete with 2 nos. 65mm diameter screwed type
jointing to 150mm diameter steel pipe (measured landing valves, jointing to 150mm diameter steel pipes
separately) - Nos (measured separately) - Nos
The following in Marker posts and lettering