Professional Documents
Culture Documents
TASK:
The objective of complex engineering task is to observe and analyze the electrical circuits through
simulation in order to provide better understanding of circuits.
Consider Figure 1 and 2 and verify KVL and KCL respectively. (Unknown values of R1& R2 in
both circuits will be last 2 digits of your respective Enrollment Numbers in K Ω. If any value of
digits is 0 then take it (assume) 1K Ω.)
For measurements draw schematic (circuit diagram) using Multisim Software and record the
readings of current and voltages in Table 1 and Table 2 using Voltmeter and Ammeter
(multimeter).
For theoretical observations, show proper working and calculation. You can show working on
paper and attach screenshot.
TOOLS:
Multisim Software
METHODOLOGY (Procedure):
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
SIMULATION DIAGRAM:
Screenshot of both circuits from multisim.
Note: Use command Ctrl+Alt+A and write your Name and Reg. No in Background of multisim layout.
RESULTS:
Table # 1: Observation Table for KVL
7 I OUT
CONCLUSION:
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________