Professional Documents
Culture Documents
a. Aluminum oxide
b. Silicon oxide
d. Corundum
21. Which bond is suitable for wet grinding?
a. Rubber
b. Shellac
c. Silicate
a. Vitrified
b. Rubber
c. Shellac
d. Silicon
23. The grade of grinding wheel depends upon
a. Grain size
b. Hardness of bond
c. Kind of abrasive
d. Structure
24. One of the causes of grinding wheel gazing.
b. Wheel is hard
a. Brush
c. Cotton waste
a. On the circumstances
c. On the flank
a. Compass
b. Protractor
c. Ruler
d. Trammel
31. Which of the following has its angle 30 and is used for giving
sharp impression on soft metals?
a. Center punch
b. Dot punch
c. Prick punch
d. Hollow punch
32. Which of the following has its angle 60 and is used for dotting
after marking the lines on general works?
a. Center punch
b. Dot punch
c. Hollow punch
d. Prick punch
33. Which of the following has its angle 90 and used to give marks
for the location of drills?
a. Center punch
b. Dot punch
c. Hollow punch
d. Prick punch
34. It is used on soft metals and non-metals for making holes.
a. Center punch
b. Dot punch
c. Hollow punch
d. Prick punch
35. Reason why cast iron is selected for the manufacturers of
surface plate.
b. It is cheaper
a. Steel rule
b. Vernier caliper
c. Micrometer
a. Peening
b. Swaging
c. Bending
d. Upsetting
38. The good quality of a measuring tool
a. Bending
b. Peening
c. Swaging
d. upsetting
41. A holding device, which is used to hold, or grip work piece,
while filling, chipping or any other bench work or while machining
or drilling them.
a. vise
b. clamp
c. grip
d. pressed
42. A multi pointed hand anything tool used to remove material
from metallic and non-metallic work pieces to match with drawing,
shape and size.
a. Cold chisel
b. file
c. hacksaw
a. reamer
b. swaging
c. peering
d. tapping
44. A device used to fix two or more parts.
a. Jigs
b. fixtures
c. fastener
d. clamp
45. A machine element inserted parallel to the axis of a shaft.
a. fastener
b. cotter
c. key
a. fastener
b. cotter
c. key
d. clamp
47. The process of extracting iron in a blast furnace is called
a. sintering
b. smelting
c. casting
d. manufacturing
48. Which of the following is a product of blast furnace?
a. Wrought iron
b. Cast iron
c. Pig iron
d. Gray iron
49. A type of iron, which contains 3 to 3.5%carbon either in,
combined form or in free state.
a. Wrought iron
b. Cast iron
c. Pig iron
d. Gray iron
50. Which of the following furnace used for manufacturing of cast
iron?
a. Cupola furnace
b. Crucible furnace
c. Electric furnace