You are on page 1of 8

DAILY REPORT No.

WELL DATA
WELL: TOTORO SUR-1 DATE: 8-Dec-21
COMPANY: PAREX RESOURCES CURRENT DEPTH: 10900.0 Ft PREV. DEPTH 10900.0 Ft
RIG: PIONEER 52 TVD: 10009.99 Ft PROGRESS 0.0 Ft

OPERATION @ 16:00 Hrs: POOH 5 1/2" DP + BHA No. 4( Triplecombo + MWD) at 8754 ft

CASING DATA BIT DATA MUD DATA


CURRENT No.4 LAST No. 3
DIAMTER 8 3/4" PDC IN DIAMTER 8 3/4" PDC IN MW 9.20 ppg
MAKE BAKER MAKE BAKER FV 76.00 sec/qt
CASING SHOE: 39 Ft TYPE D505TX TYPE GT56WRO PV 17.00 cP
INT.DIAM.CSG: 12.25 IN SERIAL 5321025 SERIAL 5299354 YP 29.00 Lb/100 ft
NOZZLES 5x13/32" NOZZLES 5x12/32" GELES 9/15/22 Lb/100 ft
0PEN HOLE 8315.0 Ft IN 8315 Ft IN 3133 Ft PH 10.50
Footage 2585 OUT 10900 Ft OUT 8315 Ft MBT 6.25 Lb/bbl
DRILLING PARAMETERS PRESSURE DATA VOLUME DATA ADDITIONAL DATA
WOB Klb P.INYECC - psi ANNULAR VOL 489.8 BBL TOTAL BIT 24.18 HRS
TABLE RPM RPM EMW - ppg PIPE VOL. 216.9 BBL ROP TOTAL 106.9 FT/HR
MOTOR RPM RPM DEPTH - ft (TVD) TOTAL VOL. 707 BBL BIT 24 HRS 11.21 HRS
TORQUE kLB/FT MW TEST - ppg LAG STROKES 10973 STK ROP 24 HRS 0.0 FT/HR
SPP psi LAG TIME 64.0 MIN SURVEY
SPM SPM THEOR. ECD 9.98 PPG DEPTH INCL. AZIMUT
FLOW IN GPM DIR. ECD 10.20 PPG 10805.0 15.20 92.90

HOURS REMARKS

TOH 5 1/2'' DP + BHA No.4 (Triplecombo + MWD) from 9968 ft to 8661 ft.

On elevator from 9968 ft to 8900 ft


At 8900 ft (C5 Fm) obseved tigth point, max overpull : 50 klb, worked string attemped pass unsuccesfully.
Back reaming from 8900 ft to 8661 ft. Parameters: Q: 600 gpm, SPP: 2950 - 3220 psi, RPM btm: 188 - 208 rev/min (RPM surf:50 - 70 rev/min, RPM motor: 138
rev/min), TQ: 14 - 30 klbf-ft.
00:00 - 04:00
Caving max: 0.5 bph

Remarks:
- Observed TOH from TD, 75% stand out with over torque. Used power tong at some connections.
- Monitored Pipe displacement through Trip Tank, stable levels.

Continued TOH 5 1/2'' DP + BHA No.4 (Triplecombo + MWD) with Back reaming from 8661 ft to 8315 ft. (C2 Fm) Parameters: Q: 600 - 650 gpm, SPP: 2800 -
3350 psi, RPM btm: 198 -219 rev/min (RPM surf: 60 - 70 rev/min, RPM motor: 138 -149 rev/min), TQ: 14 - 34 klbf-ft.

Caving max: 0.5 bph


04:00 - 05:30
Remarks:

- Monitored Pipe displacement through Trip Tank, stable levels.

At 8315 ft circulated bottom up and reciprocated string pipe from 10798 ft 10900 with Parameters: Q: 650 gpm, SPP: 3400 - 3500 psi, RPM btm: 209 rev/min
05:00 - 06:00 (RPM surf: 60 rev/min, RPM motor: 149 rev/min), TQ: 12 - 22 klbf-ft.

TIH 5 1/2" DP + BHA No. 4 ( Triplecombo + MWD) from 8381 ft to 10900 ft as follows:

- On elevators 8381 ft to 10798 ft

06:00 - 10:00 Remarks:


- At 9644 ft broke circulation with Q: 210 gpm, SPP: 140 psi.
- At 10238 ft broke circulation with Q: 200 gpm, SPP: 190 psi.

Pumped and displaced out 60 bbl Vis pill (MW: 9.2 ppg - FV: sec/qt) with tracer material 4 ppb wall nut , Circulated to clean hole reciprocating string from 10900 ft
10809 with parameters: Q: 500 gpm, SPP 2400 psi., RPM btm: 156-186 rev/min (RPM surf: 40 - 70 rev/min, RPM motor: 116 rev/min), TQ: 25-33 klbf-ft.

Remarks:
10:00- 11:30 - Avg. Open Hole Diameter according to volumetric test: 10.7" 12596 STK (Theoretical for 8 3/4" Hole Section: 8440 STK).
Took String weights as follow:
- With pump: P/U:400 klb, S/O: 250 klb, ROT: 250 klb.
- Add lubricant at 3% V / V (1% EZE SLIDE + 2% QLUBE)

POOH 5 1/2" DP + BHA No. 400 ( Triplecombo + MWD) from 10900 ft to 10247 ft as follows:
- On elevators 10809 ft to 10300 ft
11:30 -12:30
-Monitored displacement through Trip tank.

At 10247 ft ( Mirador formation Top at 10253 ft) Circulated bottom up, reciprocating string ( 10292 ft to 10247 ft) with, Q: 550 gpm, P: 2650 psi, RPM btm: 164
rev/min (RPM surf: 35 rev/min, RPM motor: 128rev/min), TQ: 15-18 klf-ft.

Remarks:
12:30-14:00
- Took String weights as follow:
- With pump: P/U: 350 klb, S/O: 240 klb, ROT: 290 klb.
- At 10245 ft, performed flow check for 15 min, Well Static. OK.
- Caving: 0.7 bph; Shape: 70% Blky, 10% Splntd, 20% Lumps, Litho: Clst/Sh; Size: (5 - 8 mm, Avg: 6.5 mm).
Continued POOH 5 1/2" DP + BHA No. 400 ( Triplecombo + MWD) from 10247 ft to 8754 ft as follows:
On elevators from 10247 ft to 8754 ft
14:00-16:00
Remarks:
-Monitored displacement through Trip tank.
TOPS MEASURED

FORMATION MD TVD TVSS FORMATION MD TVD TVSS


GUAYABO Surf. C8 10109 9254.58 -8665.85
LEÓN 5492 5130.51 -4541.78 Mirador 10253 8390.95 -8802.22
C1 7256 6107 -4541.78 Eocene Unconf 10510 9635.78 -9047.05
C2 8051 7404 -6107.21 Guadalupe 10532 9656.72 -9067.99
C3 8322 7653.35 -7064.65 Gacheta 10674 9792.14 -9203.41
C4 8600 7905.73 -7313.00 TD 10900 10009.99 -9421.26
C5 8680 7978.59 -7389.86
C6 9344 8565.20 -7976.47
C7 9581 8772.96 -8184.23

. KLB SLOW CIRCULATION RATES 10890 @ ft, MW: 9.2 ppg


SLOW
410 CIRCULATION STK 1 PSI 1 STK 2 PSI 2 STK 3 PSI 3
RATES AT
240 1 30 410 30 300
310 2 40 310 40 380
3 50 240 50 240

BGG HYDROC C1 C2 C3 IC4 NC4 IC5 NC5


DEPTH TYPE
(FT) % % ppm ppm ppm ppm ppm ppm ppm

OPERATOR / ADT: JOSE CALLE / CARLOS ROJAS


SUMMARY LITHOLOGY
DEPTH LITHOLOGY

FT SND SST SLTST CARB SLTST LMST CLST COAL SHALE CGL SND SBLITH CGLSND
WOB klbs 15.00 Drilled ahead 8 3/4" HS w/ BHA No.4 (Directional) rotating
RPM motor rev/min 196.00 Drilled ahead 8 3/4" HS w/ BHA No.4 (Directional) Sliding
RPM Surf rev/min 70.00
TQ klbf-ft 30.00
SPP psi 2600.00
Q gpm 490.00 Drilled ahead 8 3/4" HS w/ BHA No.4

(Directional) rotating through

Formacion Guadalupe Formation

unidad with parameters

Drilled ahead 8 3/4" HS w/ BHA No.4 (Directional)


rotating through Guadalupe Formation with
parameters Q: 490 gpm, SPP: 2600 psi, RPM btm: 266
rev/min(RPM Surf: 70 rev/min, RPM motor:196 Drilled ahead 8 3/4" HS w/ BHA No.4 (Directional) Slid
rev/min) TQ: 30 klbf-ft, WOB :15 klbs Formation with parameters
A No.4 (Directional) rotating through Guadalupe Formation with Drilled ahead 8 3/4" HS w/ BHA No.4 (Directional) rotating
A No.4 (Directional) Sliding through Guadalupe Formation with parameters

Drilled ahead 12 1/4" HS w/ BHA No.1

(Directional) Sliding through

Formation

with parameters

BHA No.4 (Directional) Sliding through Guadalupe


mation with parameters
A No.4 (Directional) rotating through Guadalupe Formation with parameters Q: 490 gpm, SPP: 2600 psi, RPM btm: 266 rev/m
00 psi, RPM btm: 266 rev/min(RPM Surf: 70 rev/min, RPM motor:196 rev/min) TQ: 30 klbf-ft, WOB :15 klbs
OB :15 klbs

You might also like