Professional Documents
Culture Documents
Revised PT program: April & May-2021,PT calender-2021 with maximum 30% discount by Deep Metallurgical Services
From
: mech@deep-ptp.in Mon, Jul 05, 2021 06:24 PM
Subject
: Revised PT program: April & May-2021,PT calender-2021 with maximum 30% discount by Deep Metallurgical Services 3 attachments
To
: SUDIP ACHARYYA <sudip1697@sail.in>
Cc
: PANDURANGAN SARAVANAN <sarvan@sail.in>, deep ptp2018 <deep.ptp2018@gmail.com>
Dear PT Participant,
Thank you for your mail.
Please find attached, our NABL certificate/scope, PT program calender-2021,Ongoing PT Program : April & May- 2021,Registration format.
Deep Metallurgical Services (DMS) is a Proficiency Testing Provider (PTP) accredited by renowned National Accreditation Board for Testing and Calibration
Laboratory (NABL), India, ILAC, MRA as per ISO 17043-2010, Conformity Assessment –General Requirements for Proficiency Testing in the discipline of Metal
Testing.
Deep Metallurgical Services is offering special discount for all Proficiency Testing Schemes for PT Program Calender-2021 . The discount varies from 10 to
30% on all PT schemes in chemical analysis, mechanical test, metallography and corrosion test parameters.
Interested participants may register in the attached format for the PT program immediately. The technical instructions for many PT programs are available and
can be downloaded from our website: www.deepmetlab.in . We do not have any networking agent and kindly contact directly for any further clarification.
Due to severe COVID19 Pandemic situation and lock down throughout India, abroad and request from our existing registered PT
participants, Our PT Program schedule for April & May- 2021 has been rescheduled as follows:
Ongoing PT Program: April & May -2021
Last date for
Sample delivery date Test
result PT Report
registration submission date submission date
15.06.2021 -
10.06.2021 20.06.2021 30.06.2021 11.07.2021
Scheme Description Standard Price, Rs
no
Chem 3 Spark OES, low alloy steel ASTM E415, IS 8811 or 10500
SAE 52100/AISI O1/ any validated method
8620/4340
Chem 5 Spark OES, austenitic ASTM E1086, IS 8811 or 10500
stainless steel, AISI316/321 any validated method
/347
Chem 6 Spark OES, nickel alloy Any method 10500
grade nimonic
Chem 7 Spark OES, Cu alloy BS EN 15079 or any 10500
equivalent Brass/NAB validated method
Chem 11 Wet chemical IS 228, ASTM E350 or 10500
analysis,stainless steel any validated method
Chem 13 Spark OES, stainless steel ASTM E415/ASTM 10500
martensitic AISI 410/420/431 E1086, IS 8811or any
validated method
Mech 2 Charpy CVN, 30-250J, RT IS1757, ISO148-1, 12500
ASTME23
Mech 5 HBW 2.5/187.5 steel 150- IS1500, ISO6506- 10500
450HBW 1,ASTM E10
Mech 6 Steel Vickers Hardness IS1501, ISO6507-1, 10500
HV10, 350-850VPN ASTM E92
Mech 9 Steel Vickers Hardness IS1501, ISO6507-1, 10500
HV0.5, 400-750VPN ASTM E92, ASTM E384
Mech 10 Steel Vickers Hardness IS1501, ISO6507-1, 10500
HV0.2, 550-850VPN ASTM E92
Mech 12 Tensile test, flat steel IS1608 & ISO6892-1 10500
UTS 250-700MPa
Mech 13 Tensile test, round ASTM A370, ASTM E8 10500
stainless steel UTS 400-
850MP
Mech 14 Tensile test, round stainless IS1608, ISO6892-1 10500
steel UTS 400-850MP
Mech 17 Steel Vickers Hardness IS1501, ISO6507-1, 10500
HV30, 150-650VPN ASTM E92, ASTM E384
Corr 2 Inter granular corrosion IGC ASTM A262, Pr. B, ISO 15750
Pr. B
Corr 3 Detecting Detrimental inter- ASTM A923 Method C 15750
metallic compound
Corr 4 Ferrite chloride pitting test ASTM G 48, Method A 15750
Met 2 Carbon steel, % ferrite & % ASTM E562, ASTM 10500
pearlite E112, ASM Vol.9, ISO
Met 3 Nitriding case depth/ IS 6416, SAE, ISO 15750
Carburizing case depth method
@550HV1, mm
Met 4 Grain size stainless steel & ASTM E562, ASTM 14000
microstructure E112, ASM Vol.9, ISO
Met 6 % Delta ferrite, duplex ASTM E562, ASTM 12500
stainless steel A800, ISO
Quantity discount Discoun Packing and Charge
t forwarding s, INR
charges
Single order with 2 to 4 PT 10% Single PT item 500
program
Single order with 5 to 6 PT 20% Single PT tensile 500
program sample
Single order with 7 or more PT 30% 3 PT samples in 1000
program same distribution