Professional Documents
Culture Documents
Fixit Raincoat 2 in 1
Description
Dr. Fixit Raincoat 2 in 1 is an elastomeric waterproof coating that provides a seamless and tough waterproof
barrier with excellent crack bridging ability that can accommodate movements due to thermal variations in the
waterproofing system.
Features
}}Waterproofing– Provides excellent water resistant barrier on roof / terrace & exterior wall, increases the
durability of structure.
}}Tough and abrasion resistant– Suitable for light foot traffic
}}Highly durable and light weight– UV resistant and needs no extra protective screed. Provides long time
}}Easy to apply– No need to remove the existing system. Can be brush or roller applied on vertical surfaces
without sagging.
}}Elastomeric High elasticity withstand stress caused by thermal expansion & contraction.
}}Durability– Provides long time protection to building that are endangered due to thermal degradation.
Packaging
1, 4, 10 & 20 litres
Method of Application
1 S u r fac e P r e pa r at i o n – R o o f
}}Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles.
}}In existing old terraces such as brick-bat-coba or screeds, the substrate must be checked for its soundness.
Damaged or hollow portions, sharp edges, etc. must be cut and repaired with a polymer-modified mortar using
Dr. Fixit Super Latex.
}}All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste
}}Bitumen based waterproofing treatments must be completely removed by mechanical scarification or by any
means such as wire brushing & shot blasting. Finally vacuum cleaning of all loose solids and liquids can be done,
if required.
}}All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste
}}Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Super Latex modified mortar.
taking up the second coat, the rate of application being the same. This would ensure correct consumption of
640 Dr. Fixit Raincoat 2 in 1
}}For Additional protection use Fibre mesh (40 gsm) after 1st coat of undiluted Dr. Fixit Raincoat 2 in 1 for
}}If external surface is required in white colour, apply 2 coats of Dr. Fxit Raincoat 2 in 1 (Diluted 1 ltr with water upto
10%) apply at the rate of 3.1 to 3.5 sqmtr per ltr / 2 coats. DFT – 120 – 125 microns.
Application Procedure for Exterior Surface (Repair/Repainting):
}}Apply 1 coat of Dr. Fixit Raincoat 2 in 1 (Diluted 1 ltr with water upto 5%) and apply at the rate of 3.7 to 4 sqmtr /
Coverage
}}Self Priming – Coverage 7.5 to 9 sqmtr per ltr / per coat. (Dilution 50%).
}}2 coats for Roof - Coverage 2 to 2.2 Sqmtr / ltr / per coat (No Dilution).
}}Single coat Exterior Surface – Coverage 3.7 to 4 sqmtr / ltr / Per coat (Dilution 5%).
}}Two coat Exterior Surface – Coverage 3.1 to 3.5 sqmtr per ltr / 2 coats (Dilution 10%).
Shelf Life
}}Shelf life is 24 months from the date of manufacturing if stored in original and unopened packaging in a cool
dry place away from direct sunlight.
Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.drfixit.co.in • info@drfixit.co.in expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 does not assume any liability or consequential damage for unsatisfactory results,
143