Professional Documents
Culture Documents
Technical datasheet
Applications
Water & Wastewater - distribution networks, irrigation, sludge/sewage, water treatment, leakage management,
desalination, marine, checking of pumps and water wells
Public utilities - water supply system, sewage systems, wastewater, industrial water, sludge, human waste etc.
Food industry - breweries, dairies
Chemical - chemicals, power stations, oil and gas
Construction - building material slurry, sediment slurry, industrial water, plant engineering offshore, shipbuilding etc.
Hygienic/Sanitary - potable water metering, food & beverages, pharmaceutical, medium and high density fluids, blending,
dosing, batching
Advantages
The DIFP20 pressure transmitter with HART® interface combines maximum precision with easy operation. It is used to measure
the relative and absolute pressures of gases, vapors and liquids. The integrated LCD shows measurements and device data. In the
version with “Ex ia (intrinsically safe)“ explosion protection, the pressure transmitter can be fitted up to zone 0.
The housing and sensors are made from high-quality stainless steel. Various front-flush process connections are available for
applications to meet hygiene requirements, including the EHEDG- certified PEKA connection system. A high-temperature version
capable of withstanding medium temperatures up to 200°C has been specifically designed for application involving hot media
and pipes. It is also possible to connect remote seals for special process engineering aplications. The transmitter is programmable,
making it readily adaptable to a variety of different measurement tasks. A user-friendly setup program is available as an accessory,
for operation via the interfaces. A rotary knob ensures highly convenient and fast local, manual operation.
Features
Stainless steel housing
HART® interface
Easy setup program
0.05 % linearity and turn down only 1:50
Unique design - with rotary knob for ease of operation and EX ia expolosion
protection against gas and dust
LCD display - with bar graph, scaling with a choice of measurement unis, dis-
play of sensor temperature, minimum and maximum pressures, current sensor
functions and more
Process reliability
Parts in contact with the medium are made of stainless steel (alternatively
with NiMo alloy, or with a Monel, titanium or PTFE coating when used with a
pressure separator). Combined with the front flush system, this offers optimum
resistance to even aggressive media. The measuring instrument has a high degree
of precision with deviation from characteristic line of 0.05 %, and offers excellent
long-term stability of < 0.1 % per year. The version with explosion protection „Ex
ia (intrinsically safe)“ allows the pressure transmitter to be installed up to zone 0.
The high-temperature version guarantees safe application in SIP and CIP systems.
Flexible
The measuring instrument can be fitted in any installation position for optimum readability, configuration, and electrical
installation.
Measurement features can be adapted to all major applications (process pressure, filling level) and ambient conditions using the
adjustable parameters.
2
Technical Specifications
Technical data
DIFP20 Reference conditions DIN 16086, DIN EN 60770 and DIN IEC 770/5.3
Sensor system Silicon sensor with stainless steel separating diaphragm
Permissible load change > 10 million
Input pressure (mH2O, inH2O, inHg, ftH2O, mmH2O,
mmHg, psi, bar, mbar, kg/cm2, kPa, Torr, MPa)
Measurement value (% or scaled with a freely adjustable
measurement unit)
Displayed values Output current (mA)
Sensor temperature (°C; °F)
Additional display data (Minimum pressure, maximum
pressure, error, overrange, underrange, operating hours,
device parameters)
Mounting position (Any)
Calibration position (Device standing vertically, process co-
nnection on bottom)
Location Location-dependent zero point offset (Zero point calibrati-
on possible locally or via setup)
For medium temperature 1 (up to 120 °C) <1 mbar
For medium temperature 2 (up to 200 °C) <10 mbar
Display LCD, two-line with bar graph
Display unit can be rotated 90° at a time
Alignment
Housing can be rotated ±160°
Display size Display field 22 × 35 mm/font size 7 mm/5 digits
Display color Black
Local operation With rotary knob and LCD
Setup program Via interface or for output 410 (4 to 20 mA with HART®)
Voltage supply For version with explosion protection 0 (none)
DC 11.5 to 36 V
Explosion protection 1 (ATEX Ex ia) DC 11.5 to 28 V
The voltage supply must be intrinsically safe and must
not exceed the following maximum values: Ui DC 28 V
Ii 93 mA
Pi 750 mW
Output
For output 405 4-20 mA, two wire
For output 410 4 to 20 mA, two wire with HART®
Step response time 190 ms without damping
Damping adjustable, 0 to 100 s
For output 405 (4 to 20 mA) Burden (UB-11.5 V) ÷ 0.022 A
For output 410 (4 to 20 mA with Burden (UB-11.5 V) ÷ 0.022 A; additional: min. 250 , max.
HART®) 1100
3
Ambient conditions
Accuracy
Relative pressure
Nominal measuring range -600 to +600 mbar rel. -1 to +4 bar rel. -1 to +25 bar rel -1 to +100 bar rel -1 to +600 bar rel.
Factory setting for measu-
0 to 600 mbar 0 to 4 bar 0 to 25 bar 0 to 100 bar 0 to 600 bar
ring range
Minimum span 60 mbar 0.1 bar 0.5 bar 5 bar 30 bar
Turndown ratio (r) r < 20 r < 50 r < 52 r < 20 r < 20
Linearity for linear characte- 0.1 % for r < 10 0.05 % for r < 10 0.05 % for r < 10 0.05 % for r< 10
ristic as % of the set span r × 0.01 % for 10 <r <20 r × 0.005 % for 10 <r < 50 r × 0.005 % for 10 <r <52 r × 0.005 % for 10 < r< 20
Accuracy at 20 °C as % of 0.2 % for r < 10 0.1 % for r < 10 0.1 % for r < 10 0.1 % for r < 10
the set span r × 0.02 % for 10 <r < 20 r × 0.01 % for 10 <r < 52 r × 0.01 % for 10 <r < 20
Accuracy at -40 to +85 °C as 0.3 % for r < 10 0.2 % for r < 10 0.2 % for r < 10 0.2 % for r < 10
% of the set span r × 0.03 % for 10 < r < 20 r × 0.02 % for 10 < r < 50 r × 0.02 % for 10 < r < 52 r × 0.02 % for 10 < r < 20
Long-term stability as % of
0.1 %/year
nominal measuring range
Absolute pressure
Nominal measuring range 0 to 0.6 bar abs. 0 to 4 bar abs. 0 to 25 bar abs. 0 to 100 bar abs.
Factory setting for measuring range 0 to 600 mbar 0 to 4 bar 0 to 25 bar 0 to 100 bar
Minimum span 60 mbar 0.1 bar 0.5 bar 5 bar
Turndown ratio (r) r < 10 r < 40 r < 50 r < 20
Linearity for linear characteristic as % of the 0.1 % for r < 5 0.05 % for r < 10 0.05 % for r < 10 0.05 % for r< 10
set span r × 0.02 % for 5 <r <10 r × 0.005 % for 10 <r < 40 r × 0.005 % for 10 <r <50 r × 0.005 % for 10 < r< 20
0.2 % for r < 5 0.1 % for r < 10 0.1 % for r < 10 0.1 % for r < 10
Accuracy at 20 °C as % of the set span
r × 0.04 % for 5 <r < 10 r × 0.01 % for 10 <r < 40 r × 0.01 % for 10 <r < 50 r × 0.01 % for 10 <r < 20
0.3 % for r < 5 0.2 % for r < 10 0.2 % for r < 10 0.2 % for r < 10
Accuracy at -40 to +85 °C as % of the set span
r × 0.06 % for 5 < r < 10 r × 0.02 % for 10 < r < 40 r × 0.02 % for 10 < r < 50 r × 0.02 % for 10 < r < 20
Long-term stability as % of nominal measuring
0.1 %/year
range
Approvals/marks of conformity
Certificate/
Mark of conformity Testing laboratory Test basis Valid for
certification number
EN 60079-0
ATEX electrosuisse SEV 09 ATEX 0138 X EN 60079-11 403025/x-1-...
EN 60079-26
Process connection 997
EHEDG TUM MAK 03/2006 Document No.8
( PEKA)
IEC 60079
INMETRO CEPEL CEPEL 13.2213X Extra code 227
IEC 60529
Testing report 203951/4 dated
DNV Det Norske Veritas AS A-13300 403025/x-1-.../880
2012-06-13
GOST-R
4
Technical Specifications
Mechanical properties
Electrical connection
Terminal assignment
Connection
Cable gland Round plug, M12 × 1
Voltage supply
for non Ex version DC 11.5 to 36 V 1 L+ 1 L+
for Ex version DC 11.5 to 30 V 2 L- 3 L-
Output
4 to 20 mA two wire 1 L+ 1 L+
Impressed current 4 to 20 mA 2 L- 3 L-
in voltage supply
Current output test connection TEST +
CEPEL 13.2213X
Inherent resistance of ammeter 10 TEST -
HART® test connection HART +
A-13300
The burden must be present! HART -
Functional ground
3 4
5
Ordering specifiation codes
6
Arkon Flow Systems
Nováčkova 11, 614 00 Brno, Czech Republic
Tel. +420 543 214 822, Tel./Fax +420 543 215 249
Enquiries/Orders/General questions: office@arkon.co.uk
Marketing support/brochures: marketing@arkon.co.uk
Technical support: support@arkon.co.uk
www.arkon.co.uk
version 5/2015
7