Professional Documents
Culture Documents
VINYLESTER RESIN
FIRE RETARDANT RESIN
Offering the most advanced resin system for the most
demanding requirement in Marine, Building Material,
Transportation and Composites markets.
Contents
一、Introduction of Eternal Chemical Co., Ltd. 01
二、APPLICATION
8 CASTINGS 07 16 ADDITIVES 15
9 GEL COATS 08
Eternal Unsaturated Polyester Resin
Leading UPR manufacturer for general purpose, FRP and composites.
With 3 production plants located in Taiwan and China,
Eternal Chemical Co., Ltd has manufactured unsaturated polyester
resin for over 45 years. As a leading producer in Asia,
Eternal offers a comprehensive range of UPR including general purpose,
chemical-resistant (vinylester)and fire retardant. Our products meet
stringent quality standard, including Lloyd’s, DNV and NK and have earned
reputation in more than 30 countries worldwide.
01
1 HAND LAY-UP AND SPRAY-UP
Viscosity ( cps ) tg(min.)
Item Name Type Properties Features Applications
(25℃) (25℃) ( a )
ETERSET 2504PT Ortho 200 - 600 8 - 35 Medium reactivity, thixotropic. Small FRP products.
ETERSET 2593APT Ortho 250 - 550 10 - 30 Rigid, waxed, thixotropic. Quick cure Hand lay-up/ Spray-up
ETERSET 2504APT Ortho 300 - 600 8 - 35 Medium reactivity, waxed, thixotropic. Small FRP products.
ETERSET 2507APT Ortho 300 - 600 8 - 21 Waxed, thixotropic. Small FRP products.
ETERSET 2597APT Ortho 300 - 600 30 - 120 Waxed, thixotropic. Hand lay-up/ Spray-up
Blended with ATH to provide fire retardant Low smoke, non-halogen, Hand lay-up
ETERSET 2593PTF-E Ortho 300 - 600 30 - 60 characteristic. UL94V-0 certified.
ETERSET 2591APT Ortho 350 - 650 5 - 30 Waxed, thixotropic. Good water resistance Septic tank etc.
ETERSET 2530PT DCPD 300 - 600 10 - 40 Thixotropic. Fast tack free Hand lay-up/ Spray-up
Fishing boats,
ETERSET 1629PT ISO 300 - 800 20 - 90 Heat and chemical resistance. Approved by DNV. yachts and pools, etc.
(a) Time to Gel : 1% MEKPO (55% in DMP) Abbreviation: 1. in each item name, A = waxed, P = pre-accelerated, T = thixotropic
2. tg = time to gel
02
2 PRESS MOLDING
Viscosity ( cps ) Processing
Item Name Type tg(min.) Properties Features Applications
(25℃) Technique
300 - 600 10 - 20 ( d ) High reactive, low viscosity High impact strength, excellent Filament winding FRP products
ETERSET 2820 Ortho
crack and craze resistance.
Modified by vinyl monomers, Pre-impregnation of fabric,
ETERSET 2580 ISO 200 - 400 - SM free and excellent wet-out Filament winding
resilient. hollow fishing rod and etc.
10 - 20 (d) Low viscosity Specially designed for water Filament winding FRPM pipe.
ETERSET 2845 ISO 300 - 600
resistance on FRP laminate.
Good chemical resistance and
ETERSET 2846 ISO 600 - 1000 20- 30 (d) Filament winding Tank, pipe.
high tensile elongation.
03
3 SMC/BMC
Viscosity ( cps ) tg(min.)
Item Name Type Properties / Features Processing Technique
(25℃) (25℃) ( b )
ETERSET 2837 Ortho 600 - 1400 5 - 15 High reactivity, thickenable, general purpose. BMC, SMC.
ETERSET 2812 Ortho 1300 - 1600 5-8 Excellent thickening behavior, low shrinkage. BMC, SMC.
ETERSET 2816-1 Ortho 1800 - 2200 5-8 Excellent thickening behavior, low shrinkage. BMC, SMC.
ETERSET 2811 Ortho/NPG 1200 - 1500 5-8 Excellent thickening behavior, low shrinkage. BMC, SMC.
ETERSET 3585Z-1 ISO 5000 - 9000 5 - 15 High reactivity, thickenable, low shrinkage. BMC, SMC.
ETERSET 2935 TPA 2000 - 3000 10 - 20 Excellent blister resistance, ideal thickening behavior. SMC
ETERSET 3584-2 — 1000 - 2000 5 - 15 Very high HDT, ideal thickening behavior. BMC, SMC.
ETERSET 2660PT ISO 300 - 600 20 - 40 (a) Rigid ; Heat and chemical resistance. FRP mold.
ETERSET 2931P TPA 360 - 440 20 - 25 (a) Excellent resistance to water spotting. Filament winding tank, pipe.
ETERSET 2942 Bisphenol A 400 - 600 8 - 12 (b) Good corrosion resistance. Corrosion control applications.
5 CORRUGATED SHEETS
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃)
ETERSET 2134 Ortho 200 - 500 5 - 7 (f ) Fast wet-out, good translucency, weathering resistance. Continuous lamination, flat and corrugated sheet.
ETERSET 2135P Ortho 200 - 300 5 - 7 (a) Fast wet-out, good translucency, weathering resistance. Continuous lamination, flat and corrugated sheet.
ETERSET 2449P-H Ortho 230 - 280 11 - 13 (a) Excellent translucency, weathering resistance. FRP corrugated sheet.
ETERSET 2136 Ortho 250 - 300 3 - 5 (f ) Fast wet-out, good translucency, weathering resistance. Continuous lamination, flat and corrugated sheet.
ETERSET 2132L Ortho 300 - 400 5 - 7 (b) Good translucency, weathering resistance, high strength. Continuous lamination, flat and corrugated sheet.
ETERSET 1629 ISO 200 - 400 40 - 60 (d) Heat and chemical resistance. Approved by DNV. SCRIMP, VARTM.
ETERSET 2960-F Vinyl Ester 200 - 300 60 - 90 Heat and chemical resistance. Approved by DNV. SCRIMP
ETERSET 2960PT Vinyl Ester 350 - 750 30 - 60 Heat and chemical resistance. Approved by DNV. Fishing boats, yachts and pools etc.
06
7 DECORATIVE PANELS
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃) (a)
ETERSET 2210AP Ortho 200 - 800 2-5 Good working ability, general type
Decorative panel for table top, door, etc.
ETERSET 2206AP Ortho 300 - 900 2-5 Good working ability in filler or pigment process
8 CASTINGS
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃)
ETERSET 2126AP Ortho 3 - 10 (a) Resistance to crack, semi-rigid. General or hollow casting objects.
200 - 500
ETERSET 2126AP-1 Ortho 3 - 10 (a) Excellent coloration ; Light color blank. General or light coloration objects.
ETERSET 2126P-8 Ortho 200 - 500 3 - 10 (a) Flexible, resistance to crack. General or hollow casting objects.
ETERSET 2112AP Ortho 300 - 600 5 - 15 (a) Flexible, low shrinkage. Furniture part.
ETERSET 2111AP Ortho 300 - 600 15 - 20 (a) Flexible, low shrinkage ; Winter type. Furniture part.
ETERSET 2122 Ortho 300 - 1000 5 - 10 (c) Low shrinkage, resistance to crack. Large clear casting objects.
ETERSET 2010 Ortho 700 - 1300 - Excellent wetting and grinding of pigments. Pigment concentrates and pastes.
ETERSET 2733 Ortho/NPG 700 - 1300 5 - 12 (d) High reactivity, excellent weathering resistance. Base resin for gel coat manufacture.
ETERSET 2740P Ortho/NPG 2000 - 5000 20 - 40 (a) Sag resistance;Excellent weathering resistance. Gel coat for cooling tower, tank etc.
20 - 40 (d) Sag resistance;Superior weathering resistance. Application requiring outstanding toughness with
ETERSET 2743 ISO/NPG 2000 - 5000
Excellent chemical resistance and heat resistance. good water and heat resistance;ex. marine gel coat.
TONER 102 Ortho 10000 - 20000 - Good hiding power. White toner.
10 ADDHESION
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃)
Elastomer-modified High elongation, well flexibility, high impact strength Primer for lining concrete, carbon steel,
ETERSET 2968-C 350 - 450 10 - 13 (j) stainless steel, FRP and plastic substrates.
Vinyl Ester and excellent adhesion.
Elastomer-modified High elongation, well flexibility, high impact strength, Primer for lining concrete, carbon steel,
ETERSET 2968T-C 260000 - 300000 20 - 25 (j) excellent adhesion and high thixotropic. stainless steel, FRP and plastic substrates.
Vinyl Ester
08
11 BUTTON
Viscosity ( cps ) tg(min.)
Item Name Type Properties / Features Processing Technique
(25℃) (30℃) ( c )
Rigid, medium reactivity, high gloss. Shirt button with centrifugal molding,
ETERSET 2422 ISO 800 - 1600 2-5
recommended for thinner sheet.
Medium reactivity, high gloss, High impact button.
ETERSET 2432-1 ISO 800 - 1600 5 - 10
resistance to crack and craze.
Medium reactivity, high gloss, High impact button.
ETERSET 2475 ISO 800 - 1600 5 - 10
resistance to crack and craze.
ETERSET 2462 ISO 2000 - 7000 3 - 10 Superior resistance to water, and heat. Molded button.
Flexible, low reactivity, low shrinkage, Added into RS-50099-1 to further enhance
ETERSET RS-5273 Other type 1500 - 2500 15 - 25
resistance to water. elasticity and impact strength.
Medium reactivity, excellent dying properties,
ETERSET 3530V-16 Ortho 1000 - 1500 2-5 Shirt button, chalk white button.
high gloss.
ETERSET 2425 Ortho 800 - 1600 2-5 Excellent dyeing properties. Chalk and thicker button shirt button, rod button.
ETERSET 2426 Ortho 800 - 1600 2-5 Excellent dyeing properties. Chalk and thicker button shirt button.
ETERSET 2430 Ortho 800 - 1600 2-5 High gloss, rigid. Chalk and shirt button.
ETERSET 2433 Ortho 800 - 1600 2-5 Flexible, resistance to crack and craze. Rod button.
ETERSET 2436 Ortho 800 - 1600 2-5 Good compatibility with pearl essence. Shirt and chalk button.
ETERSET 2437 Ortho 800 - 1600 2-5 High gloss, not easy to fade. Shirt and chalk button.
Medium reactivity, high gloss, Thinner button, chalk white button.
ETERSET 2440 Ortho 800 - 1600 2-5
resistance to crack and craze.
Low reactivity, high gloss. Shirt button with centrifugal molding,
ETERSET 2446 Ortho 800 - 1600 2-5
recommended for thicker sheets.
Can be added into rigid resin (e.g. ETERSET 2446)
ETERSET 2110 Ortho 1500 - 2500 5 - 10 Resilient, low reactivity and low shrinkage.
to further enhance elasticity and impact strength.
ETERSET 2426T Ortho 1500 - 3500 3 - 15 Good pattern fixation. Rod button.
ETERSET 2446T Ortho 80000 - 120000 3 - 15 Good pattern fixation. Rod button.
(c) Time to Gel : 0.5% PT-12+1%MEKPO. (PT-12 is a promoter for button resin). 09
12 SYNTHETIC MARBLES
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃)
ETERSET 2447 Ortho 300 - 800 3 - 8 (h) Excellent wet-out of sand, high strength. Breton slab.
ETERSET 2125 Ortho 500 - 1000 10 - 20 (d) High filler loading, low shrinkage, high strength. Breton stone.
ETERSET 2226-1 Ortho 500 - 1000 10 - 20 (d) High filler loading, low shrinkage, high strength. Breton stone.
ETERSET 2449AP Ortho 600 - 1300 2 - 7 (a) Resistance to crack;Resistance to warping. Cultured onyx.
ETERSET 2130AP-4 Ortho 700 - 900 7 - 12 (a) Resistance to crack;Resistance to warping. Cultured onyx. Counter top.
Excellent translucency.
ETERSET 2824AP Ortho 1000 - 2000 8 - 18 (a) Cultured onyx. Counter top and sink.
Good wetting properties of ATH.
Exhibits good adhesion to marble, stone, Binder for highly fillered knifing fillers and
ETERSET 2166 Ortho 1900 - 2200 5 -7 (e)
polyester, and metal substrates. stoppers for marble, stone and adhesives.
ETERSET 2931 TPA 300 - 600 2 - 6 (d) Excellent translucency;Excellent blister resistance. Cultured onyx bathtub.
10
13 AUTOMOTIVE PUTTY
Viscosity ( cps ) Cure tg(min.)
Item Name Features Applications
(25℃) System (25℃)
Fast tack-free, excellent adhesion. Vehicle repair putty, FRP mold, heavy vehicle putty;
ETERSET 2327M 400 - 800 Co/MEKPO 40 - 80 (d) Good sanding properties. Machine tool putty.
Hard, air-drying and good sanding properties, Automotive body filler, heavy vehicle putty, patching
ETERSET 2320 400 - 800 BPO 4 - 7 (e) good stability. and sealing compound.
11
14 RESIN CONCRETE
Viscosity ( cps ) tg(min.)
Item Name Type Features Applications
(25℃) (25℃)
Fast curing, high filler loading, Artificial garden landscape, escape canal,
ETERSET 2518 Ortho 220 - 260 10 - 13 (i)
high heat-distortion temperature. waste-pipe, electric cable trough, human hole.
ETERSET 2517P Ortho 280 - 320 12 - 15 (a) High filler loading, good shine. Top-coating of pipes.
Superior mechanical properties, high filler loading, Artificial garden landscape, escape canal,
ETERSET 2510 Ortho 300 - 600 11 - 13( d)
high heat-distortion temperature. waste-pipe, electric cable trough, human hole.
Superior mechanical properties, high filler loading, Artificial garden landscape, escape canal,
ETERSET 2210 Ortho 550 - 1550 5 - 11 (d)
high heat-distortion temperature. waste-pipe, electric cable trough, human hole.
ETERSET 2516P ISO 250 - 300 12 - 15 (a) High filler loading, good shine. Top-coating of pipes.
12
15 FIRE RETARDANT
Fire Retardant Characteristics
tg(min.) (25℃)
LOI
Pre-accelerated
Thixotropic
BS 6853:1999 B.2
BS 476 Part7
BS 6853:1999
DIN 5510-2
NF F16-101
ASTM E162
ASTM E662
(cps)(25℃)
Viscosit y
Item Name Type Application & Remarks
14
16 ADDITIVES
Item Name Appearance Description
PT-24 Purple liquid Promoter for G.P. type resin. Cobalt Octoate (Co.6%).
Remarks
1. Resin with thixotropic characteristic should be stirred before using. This process is recommended to be repeated every 24 hours.
2. This catalogue only introduces the properties and processing characteristics of the main grades. For our whole product coverage
or other product information, please contact our sales representatives or dealer near your location.
15
ETERNAL UNSATURATED
POLYESTER RESIN