Professional Documents
Culture Documents
com
Site Menu
ElectronicsRepairFaq.com
Electronics Repair
Home Blog CRT TV Repair SMPS Repair PCB Repair Fan Repair
Test Components General Electronics Repair DVD Repair LCD Monitor Repair
This is how it works, power up the charger and it should give you a green light and if you test that charger
output, you should get 42 voltages there. When inserting the power plug into the hovering board, the charger
light should change from green to red which is an indicator that it was charging. In my case, it was showing
green but when I insert the plug into the hovering board, I could hear ticking noise coming out of the charging
indication a short on the main board.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 1/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
First thing to do was to take the hovering board off and look for shorted parts.
A very good idea to take photos of wires inside to make sure you put them back the way they were otherwise
you will get something shorted. Some wires are easy to put back but other need to be marked.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 2/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
From experience, I headed directly to the main Mosfets on that board and sure enough I found two shorted
Mosfets and needed replacement.
This is the board from the other side and I have plenty of boards like this in my shop. I buy broken board, fix
them and keep them for future use either by selling them or taking parts off them.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 3/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
1 000 DH 999 DH
In this case, I wanted to replace the whole board but the customer was not willing to pay for the price I asked so
I replaced the two shorted Mosfets. The part number is IRFB3607.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 4/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
When tested them with my multimeter, all pins on both Mosfets were shorted out which mean two things, when
the kid replaced that battery on the hovering board the charger was connected to it or the battery was full when
he tried to plug the battery in somehow touched the wrong terminals together causing the Mosfets to short out.
Either way, the damage was done and it has to be fixed.
I replace two used Mosfets with the same part numbers, connected the battery after putting the board in its place
and adding thermal paste to them. I powered up the hovering board and this was the final outcome.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 5/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
Mission accomplished.
This article was prepared for you by Waleed Rishmawi, one of our ‘Master Authors’ and currently working in the
Bethlehem area of Palestine repairing electrical and electronic equipment.
P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so,
forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in
this Link.
Note: You can check his previous repair articles in the link below:
https://www.electronicsrepairfaq.com/my-sons-car-repaired-and-maintained
About admin
Jestine Yong works as an Electronics Repair Lecturer in Kuala Lumpur Malaysia and his training
website is http://www.NoahtechElectronicsTraining.com. You can check out his repair blog at
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 6/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
http://www.JestineYong.com
Parasuraman S says:
October 2, 2019 at 1:45 pm
The father and kid approached a professional for solution and they got it! Good job there! If I were you, I
would have replaced all the electrolytic capacitors and retouched all the soldering points!
Reply
Parasuraman: thanks man I appreciate it. I looked for try joints and could not find any.
As for the capacitors, it would cost more to do that and the father does not seems to
want to spend money on it. have a blessed day
Reply
Thanks for the 80A mosfet tip. Always good to know what parts are used in those 3 phase controlled
permanent magnet hoverboard (150Watt?) motors.
Reply
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 7/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
GReat job,I enjoy reading about your repair ventures.Something to learn from them all.
Reply
Josh: thanks man. I am glad you are enjoying the articles and learning from them. have
a blessed day
Reply
Imran says:
October 2, 2019 at 10:00 pm
Imran:
thanks man. have a blessed day
Reply
Waleed,
Did you try it out?
George
Reply
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 8/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
George:
yes sir, i always test the repaired items before it goes to the customer. I also let the
customer try it out in the shop and see how it goes
Reply
Hi.
I have hoover board self balancing 2-wheel scooter, the problem is dead battery when I open the battery
pack
I found 4 mosfet 2 short RU6888R, can I replace it with any N cannel mosfet
Thanks
Reply
Leave a Reply
Your email address will not be published. Required fields are marked *
Comment
Name *
Email *
Website
Save my name, email, and website in this browser for the next time I comment.
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 9/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
Post Comment
This site uses Akismet to reduce spam. Learn how your comment data is processed.
EZ BATTERY RECONDITIONING
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 10/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
RECENT POSTS
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 11/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
CATEGORIES
LED TV Repair
Microwave Oven Repair
Mobile Phone Charger Repair
Mouse Repair
Music Box Repair
Nail Dryer Repair
Other Electronics Devices
PCB Repair
Physiotherapy Mobile Device Repair
Play Station Repair
Power Adapter Repair
Power Supply Repair
Satellite Receiver Repair
Security Camera Repair
Sensor Light Repair
Shaver Repair
smart phone repair
SMPS Repair
Speaker Repair
Test Components
Test Equipment
Toaster Repair
Toy Repair
Uncategorized
UPS Repair
USB Drive Repair
Vacuum Cleaner Repair
Welding Machine Repair
RECENT POSTS
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 13/14
20/10/2021 Shorted FETs In Hoverboard Repaired | ElectronicsRepairFaq.com
TAGS
Air Condition Repair Amplifier Repair ATX power supply repair Battery Charger Repair
Cash Register Repair CD Player Repair CFL Lamp Repair Computer Motherboard Repair
Computer Software Repair Computer Speaker Repair crt tv repair DVD Player Repair
dvd repair electronic equipment electronics repair Exit Board Repair Fan Repair
Hoverboard Repair Laptop Repair lcd monitor repair Led Light Repair led tv repair
Microwave Oven Repair Mobile Phone Charger Repair PCB Repair Play Station Repair
Power Adapter Repair Power Supply Repair satellite Satellite Receiver Repair Satellite Repair
Shaver Repair Smart Phone Repair Smps repair Speaker Repair Test Components
Test equipment Toaster Repair Toy Repair Vacuum Cleaner Repair Welding Machine Repair
https://www.electronicsrepairfaq.com/shorted-fets-in-hoverboard-repaired 14/14