Professional Documents
Culture Documents
1. In the Command bar, run the MODTRI process. In the File tab complete the yellow required fields, select the
input files and the output file.
IN- Input model file.Must contain fields XC, YC, ZC, XINC, YINC, ZINC, XMORIG, YMORIG, ZMORIG, NX, NY, NZ, and
IJK. If it is a Rotated Model then it must also include the fields X0, Y0, Z0, ANGLE1, ANGLE2, ANGLE3, ROTAXIS1,
ROTAXIS2, and ROTAXIS3.
WIRETR - Output wireframe triangle file. Note: Include TR at the end of the output file name
WIREPT - Output wireframe point file. Note: Include PT at the end of the output file name
https://datamine.freshdesk.com/en/support/solutions/articles/19000129121-how-to-generate-a-wireframe-from-a-block-model 1/5
1/2/22, 2:26 PM How to generate a wireframe from a block model : DATAMINE SOFTWARE
2. In the Fields tab add a WTOUTFIELD - Name of a numeric field to add to the wireframe output triangle file. The
value of this field is set by the @WTOUTVAL parameter.
https://datamine.freshdesk.com/en/support/solutions/articles/19000129121-how-to-generate-a-wireframe-from-a-block-model 2/5
1/2/22, 2:26 PM How to generate a wireframe from a block model : DATAMINE SOFTWARE
https://datamine.freshdesk.com/en/support/solutions/articles/19000129121-how-to-generate-a-wireframe-from-a-block-model 3/5
1/2/22, 2:26 PM How to generate a wireframe from a block model : DATAMINE SOFTWARE
4. In the Project Files tab load the wireframe to the 3D window and inspect using the visualization tools.
https://datamine.freshdesk.com/en/support/solutions/articles/19000129121-how-to-generate-a-wireframe-from-a-block-model 4/5
1/2/22, 2:26 PM How to generate a wireframe from a block model : DATAMINE SOFTWARE
https://datamine.freshdesk.com/en/support/solutions/articles/19000129121-how-to-generate-a-wireframe-from-a-block-model 5/5