CAMS Lectures, discussions and hands-on tutorials.
Course Overview Course Outline
A 3-day instructor led course combining You will learn: theory and hands-on tutorials for Consolidated Alarm Day 1 Management Software (CAMS) • System Configuration • An Introduction to Alarm Management Course participants will learn: and Guidelines • About the international alarm • CAMS for HIS management guidelines and how these – Operations interface apply to CAMS – Navigation • To use the built-in features of CAMS for – Using filters HIS on the operator stations – Shelving • Correctly manage the CENTUM VP – Eclipsing common components in preparation for – Load Shedding CAMSconfiguration – Other alarm functionality such as • Configure the CAMS: buzzer assignment and deadband • Alarm Groups management – Alarm Shelves • Review questions – Alarm Message Monitor • Hands-on tutorial: Operator Interface – Alarm Manager • CAMS Configuration – Alarm Configurator for CAMS – Common components • Test and verify alarm configuration – Alarm Groups through the Alarm Generator tool – Alarm Shelves • How to construct HIS graphics that – Alarm Message Monitor supportalarm management – Alarm Builder • How the alarm rationalisation process can • Review questions be initiated Day 2 Who Can Take This Course • CAMS configuration continued: Personnel responsible for alarm – Import/Export/Modification management and improvement initiatives. – Verifying alarm configuration using the Alarm Generator tool Participants should be familiar with the – Using Historical data to make Yokogawa Centum VP\CS3000 System View improvements engineering tool and should have a working • Hands-on tutorial: Alarm Configuration knowledge of how to navigate the operator and testing interface (HIS). • Introduction to graphic design principles relating to alarm management
CAMS Outline Rev 1.2 1
Day 3 Venue • Graphic design continued Yokogawa Australia Offices – Situational awareness Or – Design concepts and processes On site by special arrangement – DCS versus SIS graphic design – How to use colour, text, position, Enquiries shapes in alarm management support Training Manager Sydney graphics Switchboard: +61 (0)2 8870 1100 – Review questions Facsimile: +61 (0)2 8870 1111 • Hands on Tutorial: Graphic design and Email: Training@au.yokogawa.com implementation • Implementing a system for alarm Training Centres in Australia management and rationalisation Sydney – Engineering specifications Tower A, Level 2 – Alarm philosophy document 112-18 Talavera Road – Alarm assessments Macquarie Park, NSW, 2113 – Alarm analysis tools – Alarm metrics Brisbane – Improvement process 18A Metroplex Avenue • Review questions Murarrie, QLD, 4172 • Course conclusion Melbourne Certification Level 1, 211C Wellington Road Participants who attain at least 75% Mulgrave, VIC 3170 attendance will be awarded Certificate of Attendance Perth Unit 1, 115 Belmont Avenue Duration and Timing Belmont, WA, 6104 3 days Morning sessions: 9am – 12pm Afternoon session: 1pm - 4pm