You are on page 1of 2

E N E R G Y S O L U T I O N S

PRESSURE TRANSDUCER
DATA SHEET
The Pressure Transducer has a rugged design and is
accurate over a wide range of temperatures. It can be easily
attached to the gas gun connector or to a special connector
that can be made to customer’s specifications. The pressure
transducers are available in ranges of 375, 900, 1500,
3000 and 6000 psi. Pressure transducers with pressure
ratings higher than 6000 psi are available by special order.
The 1500 psi range is normally supplied with the Well
Analyzer unless the customer requests a different range.
The pressure transducer also houses a thermistor
Features
that measures transducer temperature. All pressure
• Built-in thermistor that measures transducer measurements are temperature compensated. The pressure
temperature. transducer is calibrated over a range of -40°F to 140°F.
• All pressure measurements temperature compensated. The temperature corrections are automatically applied by
• Fitting is o-ring sealed so that hand-tightening is software.
sufficient to prevent leakage.
The pressure transducer is a rugged device. The dimensions
• Waterproof pressure transient cable and pressure
are 1” O.D. x 5” in length. It can be easily attached to the
transducer connectors.
gas gun special connector or to a special connector that can
• For use with which Echometer Well Analyzer.
be made to customer’s specifications. The fitting is o-ring
Specifications sealed so that hand-tight is sufficient to prevent leakage.
The pressure transient cable and pressure transducer
• 1” O.D. x 5”
connectors are waterproof.
• Rated at 1.500 PSI
• Available in ranges of 375, 1500, and 6000 PSI. The pressure transducer is originally calibrated over a wide
(Higher than 6000 PSI available by special order) temperature range and these coefficients are permanently
placed onto the pressure transducer label and used in
Additional Product Information software calculations. The pressure transducer can be easily
The pressure transducer utilizes thin film sensor stainless re-zeroed at the beginning of each test.
steel diaphragm technology. This common type of transducer
is rugged and offers good accuracy over a wide range of
temperatures when temperature compensated.

Senior Tech is now Hamdon Energy Solutions (((ECHOMETER)))


AUTHORIZED DISTRIBUTOR
PRESSURE TRANSDUCER DATA SHEET

The pressure transducer and associated electronics have Wellsite Optimization Services
stability for measurement of better than 0.1-PSI resolution
Senior Tech (now Hamdon Energy Solutions) provides oil
with a pressure transducer having a rating of 1,500 PSI.
and gas well optimization services that both enhance
Even better resolution is available with a variety of lower
and sustain well efficiency and production. With effective
range transducers. Accurate resolution of the pressure optimization solutions and a mobile service fleet, SeniorTech
transducer is necessary in the measurement of the casing (now Hamdon Energy Solutions) offers professional expertise
pressure build-up rate. A casing pressure build-up rate and a diverse selection of optimization equipment across
of a few 10ths of a PSI over a period of a few minutes is Canada and internationally.
mandatory for proper analysis of the casing annulus gas flow
Service areas include:
rate and gradient of the gaseous liquid column.
• Production Optimization
The pressure transducers are available in ranges of 375,
• Regulatory Compliance
900, 1500, 3000 and 6000 PSI. Pressure transducers
• Training
with pressure ratings higher than 6000 PSI are available by
• Equipment Repair and Maintenance
special order. The 1500 PSI range is normally supplied with
the Well Analyzer unless the customer requests a different
range.

Senior Tech (now Hamdon Energy Solutions) is


an authorized Echometer distributor in Canada
and internationally, providing equipment sales,
rentals, training and service. Echometer’s Well
Analyzer equipment is used to determine well
productivity, reservoir pressure, overall efficiency,
equipment loading and well performance,
which are calculated based on a combination
of measurements of surface pressure, acoustic
liquid level, dynamometer, power and pressure
transient response.

9415 - 27 Avenue NW
Edmonton, AB T6N 1C9
T: 780.448.0074
TF: 866.448.0074
E: info@hamdon.net
E N E R G Y S O L U T I O N S
www.hamdon.net

Senior Tech is now Hamdon Energy Solutions (((ECHOMETER)))


AUTHORIZED DISTRIBUTOR

You might also like