Professional Documents
Culture Documents
ADVANTAGES
Touch Dry at 25oC 30 minutes
• Easily applied by roller, brush or airless spray.
• Economical to use Recoating Time at 1 hour
• Contains a powerful biocide to inhibit organic 25oC
growth Coverage 0.15L /m2/coat or
• Good adhesion properties
• No priming is required for newly plastered walls 120m2 / 18 litre
PACKAGING STANDARD
MasterProtect 300FC is supplied in 18 Litre pails Standard colour is grey. Other shades of grey are
available upon request.
APPLICATION PROCEDURE
STORAGE
MasterProtect 300FC can be applied by brush,
roller or airless spray equipment. Store under cover out of direct sunlight and protect
from extremes of temperature. In tropical climates
the product must be stored in an air conditioned
APPLICATION: environment. Shelf life is 6 months if stored as
Apply in one or more coats ensuring a continuous above.
even film. Failure to comply with the recommended storage
In hot dry climates, application should be assisted conditions may result in premature deterioration of
by dampening brushes and substrate if necessary the product or packaging. For specific storage
advices consult BASF's Technical Services
Department
MasterProtect ®300FC (Formerly known as Masterseal 300FC)
PREPARATION:
All concrete surfaces shall be sound, clean and
free of any loose material, non-compatible curing
compounds, dirt and dust
SAFETY PRECAUTIONS
As with all chemical products, care should be
taken during use and storage to avoid contact with
eyes, mouth, skin and foodstuffs. Treat splashes
to eyes and skin immediately. If accidentally
ingested, seek medical attention. Reseal
containers after use. Use in well ventilated areas
and avoid inhalation.
QUALITY STATEMENT
This statement is made under condition that the
material and usage thereof conform to the terms
of our published literature and recognized good
workmanship
BASF JO 03/2014
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or
implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any
labor involved in the application are beyond our control
As all BASF technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
BASF Construction Chemicals – Jordan P.O. Box 752 ,11118, Amman, Jordan
Tel: +962-6 5521672 Fax: +962 6 5523148
http://www.basf-cc.com.jo/ e-mail: enquirycc.neareast@basf.com