Professional Documents
Culture Documents
Specifications:
Kit No : 1171087 E12 Series = 85 values
Quantity : 100 pieces per value
Total Quantity : 8,500 pieces
Ratings:
Ratings shall be shown in the table 1.
Type CR
Rated Power 0.25W at 70°C
Max. Working Voltage 250V
Max. Overload Voltage 500V
Dielectric Withstanding Voltage 500V
Rated Ambient Temp. 70°C
Operating Temp.Range. -55°C to +155°C
Resistance Tolerance ± 5%
Resistance Range 1Ω to 10MΩ
Table 1
Power Rating:
Resistors shall have a power rating based on continuous full load operation at an ambient temperature of 70°C. For temperature
in excess of 70°C , the load shall be derated as shown in the figure 1.
Voltage Rating:
Resistors shall have a rated direct-current (DC) continuous working voltage or an approximate sine-wave root-mean-square
(RMS) alternating-current (AC) continuous working voltage at commercial- line frequency and waveform curresponding to the
power rating , as determined from the following formula :
RCWV =√P x R
Were : RCWV = Rated DC or RMS AC continuous working voltage at commercial-line frequency and waveform (volt)
P=Power Rating (watt)
R=Nominal Resistance (ohm)
www.element14.com
www.farnell.com
www.newark.com
Figure 1
Nominal Resistance :
Effective figures of nominal resistance shall be in accordance with E-12 series, and resistance tolerance shall be shown
by table 1.
Construction:
www.element14.com
www.farnell.com
www.newark.com
%10Ω R2-R1
11Ω 0 ±350 ×106 (PPM/°C)
Temperature
99K 0 -450 R1(t2-t1)
coefficient
100K 1M 0 -700
1.1M 0 -1,500 R1: Resistance value at room temperature (t1)
10M R2: Resistance value at room temp.plus 100°C (t2)
(Sub-clause 4.8)
Direct load :
Resistance to a 2.5 kgs direct load for 10 secs. in the direction
of the longitudinal axis of the terminal leads.
Terminal No evidence of mechanical Twist test :
strength damage. Terminal leads shall be bent through 90 ° at a point of about
6mm from the body of the resistor and shall be rotated through
360° about the original axis of the bent terminal in alternating
direction for a total of 3 rotations. (Sub-clause 4.16)
www.element14.com
www.farnell.com
www.newark.com
(Sub-clause 4.19)
www.element14.com
www.farnell.com
www.newark.com
Dimension:
Painting method:
Welding point, terminal and lead wire, is permissible to be exposed without the outer coated cover. The extent should be within
1/2 of the are angle.
www.element14.com
www.farnell.com
www.newark.com
Marking:
Resistor:
Resistors shall be marked with color coding
colors shall be in accordance with JIS C 0802
Kit Resistors:
Insert for Coated Kit
Dimensions : Millimetres
www.element14.com
www.farnell.com
www.newark.com
Dimensions : Millimetres
Storage Condition:
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 25°C ± 5°C and a
relative humidity of 60%RH ± 10%RH
Even within the above guarantee periods, do not store these products in the following conditions.
Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials
(e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
www.element14.com
www.farnell.com
www.newark.com
Item O/C Value Part Number Item O/C Value Part Number
www.element14.com
www.farnell.com
www.newark.com
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com