Professional Documents
Culture Documents
Sr. No. 6
M.E.O. Class IV
(Time allowed - 3hours)
India (2003) Afternoon Paper Total Marks 100
SECTION - 1
1. (a) With the aid of a sketch describe the method of attachment for a bilge keel and
hence explain what protection is made to reduce the possibility of the shell being
punctured in the event of damage to the keel.
(b) State why the keel does not extend for the length of the ship.
(c) evaluate the effectiveness of bilge keels for large wall sided vessels.
3. For a large passenger vessel, the center of buoyancy and the metacenter are in the line
of action of the buoyant force ____________.
(a) only when there is positive stability
(b) only when there is negative stability
(c) only when there is neutral stability
(d) at all times
Briefly Justify your Answer
4. An oceangoing ship of 10000 gross tons, contracted for in January 1976, and not
equipped with an oily water separator, all bilge slops may be retained ________.
(a) onboard in the ship's bilges
(b) in the forward peak tank
(c) in the oil purifier reservoir
(d) in a cofferdam
Briefly Justify your Answer
SECTION - 2
6. The length of a ship is 18 times the draught, while the breadth is 2.1 times the
draught. At the load waterplane, the waterplane area coefficient is 0.83 and the
difference between the TPC in seawater and the TPC in fresh water is 0.7. Determine
the length of the ship and the TPC in fresh water.
7. A ship 140 m long and 18 m beam floats at a draught of 9 m. The immersed cross-
sectional areas at equal intervals are 5, 60, 116, 145, 152, 153, 153, 151, 142, 85 and
0 m2 respectively.
Calculate:
(a) displacement,
(b) block coefficient,
(c) midship section area coefficient,
(d) prismatic coefficient.
8. A plate towed through the water at 3 m/s has a frictional resistance of 12.5 N/m2 of
wetted surface. The vessel has a wetted surface area of 5600 m2 and its service speed
is 15 knots. If frictional resistance varies as (speed)1.97 calculate the frictional
resistance per m2 and the power expanded in overcoming this resistance at the service
speed.
9. A ship 120 m long, 17 m beam and 7.2 m draught has a block coefficient of 0.76. A
parallel section 6 m long is added to the ship amidship. The midship sectional area
coefficient is 0.96. Find the new displacement and block coefficient.
10. A box barge is 7.2 m wide and 6 m deep. Draw the metacentric diagram using 1 m
intervals of draught up to the deck line.
95SCS-4
Sr. No. 6
M.E.O. Class IV
(Time allowed - 3hours)
India (2003) Afternoon Paper Total Marks 100
Answers
Answer for Question No. 3 Correct Answer : D