Professional Documents
Culture Documents
International
Equipment Catalogue
May 2012
1|Page
Contents
Introduction
Category A Accomodation
Category B Ground Water Development
Category C Construction Materials
Category D Water Distribution
Category F Water Testing
Category G Fittings
Category H Hygiene
Category L Latrines
Category O Tools & Safety Equipment
Category P Water Pumping
Category T Water Storage
2|Page
Category A
Accommodation
Code AT Large tent for use as an office
Recommendation:
• Tents should be purchased internationally wherever
possible. Do not buy locally produced copies.
3|Page
Category B
Ground Water Development
Code BDM50 BH dip meter 50m length
4|Page
Approximate 47,200
unit cost:
Recommendation:
• Drilling rigs should be not be purchased for a one off drilling programme.
• For one off programmes, it is recommended to contract out work to a local
drilling contractor.
5|Page
2. 56 4” PVC Screens x 2.5m length (113x103mm outside and inside
diameter respectively) Collapse resistance of 6.8 x 0.5 = 3.4 Bar
(kp/cm2) slot size 1mm
Recommendation:
• Borehole consumables should be purchased
internationally wherever possible.
6|Page
Category C
Construction Materials
Code CWHM Well construction materials
Recommendation:
• Construction materials should be purchased locally wherever possible.
7|Page
Category D
Water Distribution
Code DS Distribution Tapstand
Gross weight: 30 kg
Volume: 0.041 m3
Dimensions: 11 × 101 × 37 cm
Approximate unit 181.35
cost:
Recommendation:
Distribution items should be purchased internationally wherever
possible.
Gross weight: 14 kg
Volume: 0.190 m3
Dimensions: 100 × 100 × 19 cm
Approximate unit cost: 14.00
Recommendation:
Distribution items should be purchased internationally wherever
possible.
Gross weight: 15 kg
Volume: 0.080 m3
Dimensions: 47 × 47 × 36 cm
Approximate unit 1100.00
cost:
9|Page
Category G
Fittings
‘G’ fittings will normally be packed together with other small
items/fittings.
10 | P a g e
Category H
Hygiene
Code HAS All Purpose Soap
11 | P a g e
Category L
Latrines
Code LOPN Self-Supporting Plastic Squatting Slab
Recommendation:
• Latrine slabs should be purchased internationally wherever
possible.
12 | P a g e
Category O
Tools & Safety Equipment
Code OE Engineers Tool Kit
Gross weight: 95 kg
Volume: 0.326 m3
Dimensions: 74 × 80 × 55 cm
Approximate unit cost: 825
Recommendation:
• Tool kits should be purchased internationally wherever possible.
Gross weight: 6 kg
Volume: 0.027 m3
Dimensions: 35 × 45 × 17 cm
Approximate unit 80.00
cost:
Gross weight:
Volume:
Dimensions:
Approximate £400 (for 10 people)
unit cost:
Ite Qty
m Description
1. 1 Coverall, royal blue, stud front fastening, easy to wash, chest sizes 40-
41, 42-44, 46-48, 50-52 inches
2. 1 Protective heavy duty gloves, for general handling use, one size fits all,
10 pairs per pack.
3. 1 Hard hat, fitted with a 4 point plastic harness with sweatband, adjustable
head strap
4. 1 Safety boots, black, steel toe-cap protection, deep padded ankle collar.
Recommendation:
• Health & Safety kits should be purchased internationally
wherever possible.
14 | P a g e
Category P
Pumping
PDS2 2” Diesel Pump Set with Hose
Recommendation:
• Diesel pump kits should be purchased internationally
wherever possible.
15 | P a g e
Code WDHP Asia Mk II Hand Pump
Recommendation:
• Hand pumps should be purchased locally wherever possible.
• Spare parts should be sourced locally through local commercial
partners.
16 | P a g e
Category T
Water Storage
Gross weight: 95 kg
Volume: 0.439 m3
Dimensions: 125 × 65 × 54 cm
Approximate unit 675.93
cost:
3
A good quality PVC bladder tank 10 m with 4" captive screwed cap for
storage of treated water.
Fitted with:
Item Qty Description
3
1. 1 10m bladder tank, manufactured from UV resistant, food grade PVC
2
coated polyester fabric (minimum 1100 g/m ). All materials used
should be suitable for chlorinated drinking water. All seams to be
either heat or high frequency welded. Tank to be fitted with the
following items:
• 1 x 3" External BSP Male stub fitting manufactured from LM25 (or
equivalent) aluminium, with anti-chafe patch and flap
• 1x 4” (internal measurement) screwed filler cap with captive cord
Recommendation:
• Bladders should be purchased internationally wherever
possible.
17 | P a g e
Code TRT6 6 m3 Trucking Bladder PVC Tank
Gross weight: 90 kg
Volume: 0.463 m3
Dimensions: 117 × 67 × 59 cm
Approximate unit 960.00
cost:
3
One bladder tank, 6m for trucking, manufactured from food quality PVC,
fitted with 3¾" outlet and cap on top of tank. Measuring 4 m length ×
2.2 m width × 0.65 m high (6 tonne maximum)
Fitted with:
Item Qty Description
3
1. 1 6m trucking bladder tank, measuring 4 m length × 2.2 m width ×
0.65 m high (6 tonne maximum) manufactured from UV resistant, food
2
grade PVC coated polyester fabric (minimum 1100 g/m ). All materials
used should be suitable for chlorinated drinking water. All seams to be
either heat or high frequency welded. Tanks to be fitted with the
following:
2. 1 Repair kit – no glue
Recommendation:
• Bladders should be purchased internationally wherever
possible.
• Suitable alternatives may be available in some locations but it is
advised that food grade, UV resistant materials are used.
18 | P a g e