Professional Documents
Culture Documents
Check For Shear: Check For Shear: at Short Direction:: #REF! #REF! #REF! N/mm2
Check For Shear: Check For Shear: at Short Direction:: #REF! #REF! #REF! N/mm2
At Short direction: [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
Vu (Short_dir) = Wu*Lx/3 = [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)
tv = Vu/bd = #DIV/0! Moment distribution Table Joint A Member AC AB DF 0.44 0.56 FEM -14 11.8
2
pt% = #REF!
b= #REF! [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = #REF! N/mm2 [As per SP_16, t c=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)
#REF! = #REF!
#REF! kN #REF! mm
#REF! mm
N/mm2 #REF! mm Ast in mm^2/m
tor @ 150 0
tor @ 200 0
[As per SP_16, b=0.8*fck/(6.89*pt)], tor
but not
@ less
200than 1 0
N/mm2 [As per SP_16, t c=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)
tor @ 200 0
+5b)-1]/(6*b)
B DF 0.44 0.56 FEM -14 11.88 Distribution 0.9328 1.1872 Final Moment -13.0672 13.0672 The tension in the wall is computed
mm
on in the wall is computed by considering the section at height H 1 from the base. Where, H1 is greater of i) H/4, ii) 1m, ie., i) 3/
ter of i) H/4, ii) 1m, ie., i) 3/4=0.75, ii) 1m; H 1= 1m Depth of water h=H-H1=3-1-2m; p=wh=10 x 2= 20 kN/m2 Tension in short w
20 kN/m2 Tension in short wall Ts=pL/2=50 kN Tension in long wall TL=pB/2= 40 kN Net bending moment M’=M-Tx, where, x= d
ment M’=M-Tx, where, x= d-D/2=137-(170/2)=52mm M’=13.0672-50 x 0.052=10.4672 kN-m