Professional Documents
Culture Documents
Centro de Giro 640Mt
Centro de Giro 640Mt
Parameter Calculation
B257 B261 . 780- 2C
B258 B262 B234 A8+ A
B270 B272 . A8+ A + E
Method
Find the dimension "B" shown in the above drawing and then calculate the value of B234, B258,
and B262.
1) Set B-axis to 0 degree position and apply a millimess to the tool mounting face.
2) Mount a test bar on the mill spindle, set the B-axis to 90 degree position and then apply the
millimess to the outer diameter of the test bar.
4) Calculate the values of B234, B258 and B262 using the parameter (A8) and the dimension "A".
B234 /B258 /B262 = A8 + A
Find the dimension "C" shown in the above drawing and then calculate the values of B257 and
B261.
5) Set the B-axis to 90 degree position and apply the millimess to the tool mounting face.
6) Mount a test bar on the mill spindle, set the B-axis to 0 degree position and apply the millimess
to the outer diameter of the test bar.
7) Find the dimension "C" as follows: C (Actual distance) = F (Actual distance) + D/2
8) Calculate the values of B257 and B261 using the following formula: B257/B261 = 780 - 2C
Find the dimension "E" shown in the above drawing and then calculate the values of B270 and
B272.
9) Set B-axis to 180 degree position and apply the millimess to the tool mounting side.
10) Mount a test bar on the mill spindle, set the B-axis to 90 degree position and then apply the
millimess to the outer diameter of the test bar.
12) Calculate the values of B270 and B272 using the following formula: B270/B272 = A8 +A + E.
<Parameters>
Effective
Address Description Unit
Condition
A8 Machine Reference Position
Distance between the mill rotational center and
B234 the reference workpiece home position (Absolute
value)
B257 Tool Reference Position X ( side turning tool)
B258 Tool Reference Position Z ( side turning tool) 0.001mm/0.0001inch Immediate
B261 Tool Reference Position X ( side mill tool)
B262 Tool Reference Position X ( side mill tool)
B270 Tool Reference Position Z ( side turning tool)
B272 Tool Reference Position Z ( side mill tool)