DE-1000™ GBD™

Gear Box Drive

Part of the Derrick DE-1000™ Centrifuge Series

DE-1000™ GBD™ Centrifuge

The DE-1000 GBD (Gear Box Drive) centrifuge is mounted on a rugged portable skid and is driven up to 4,000 RPM
by a 50 horsepower motor via a fluid coupling which offers a low amp, soft start. The rotating assembly is coupled
to a gear box, fitted complete with a spring loaded torque out assembly with manual reset. All stop/start buttons and
manual switches are easy to reach when standing on the skid platform. Transportation brackets enable the rotating
assembly to be raised to protect the bearings during shipment.

Electrical Installation
The centrifuge and feed pump are controlled by starters mounted in explosion proof boxes. For installation, power is
supplied to the lower explosion proof electrical box via a 2 inch electrical conduit connection. The centrifuge motor
and feed pump motor are then connected to the explosion proof control panel.

Explosion proof control panel and alternative Stainless steel bowl and cover
6” Victaulic side mounted connection. are easy to clean and maintain.

DE-1000™ GBD™ CENTRIFUGE DIMENSIONS

Height: 58 3/8” (1483 mm) – Lid closed 70 9/16” (1792 mm) – Lid open
Width: 74 5/8” (1895 mm) – Lid closed 83” (2108 mm) – Lid open
Length: 115” (2921 mm)
Feed Height: 40 1/4” (1022 mm)
Weight: 6,860 lbs (3112 kg)
Motor: 50 HP, 3 Phase, Max. 65 Amps

® 15630 Export Plaza Drive • Houston, Texas 77032

Toll Free: (866) DERRICK • Phone: (281) 590-3003 • Fax: (281) 442-6948
EQUIPMENT COMPANY E-mail: derrick@derrickequipment.com • www.derrickequipment.com
DEC-DE1000 GBD - 8/03 Copyright ©2003 Derrick Corporation (All rights reserved) All illustrations, photographs, and specifications in this publication are based on the latest
All products indicated by trademark symbols are trademarked and/or registered by Derrick Corporation. product information available at the time of printing. For additional information contact your
nearest Derrick Sales Representative.